In this outline, the stability of solid/liquid dispersion was theoretically investigated the matter from all angles by using the modified DLVO theory. The stability was handled various considerations such as a production and characteristics of electrical double layer, total interaction$(V_T)$ that consisting of attractive force$(V_A)$ and repulsion$(V_R)$. coagulation, the stability ratio(W), critical flocculation concentration (cfc) and zeta potential$(\zeta)$ etc. It was possible for us to examine with the stability ratio(W), critical flocculation concentration (cfc) and zeta potential$(\zeta)$ that may estimation of stability of solid/liquid dispersion experimentally.

The 2-packaged polyurethane coatings were synthesized, blending pheylmodified polyesters(of which synthetic methods were reported in the previous paper), Desmodur L-75(polyisocyanate wide1y used for coatings), wetting-dispersing agent, white pigment. etc. A variety of coating properties were tested for the coating treatment polyurethane coationgs. Compared with conventional 2-packaged polyure-thane coating, abrasion resistance and lightness index difference of the ones synthesized in the present work were somewhat decreased, but the coating properties such as hardness, gloss specular, cross hatch adhesion. etc. were improved. Especially, resistance against chemical reagents and salt were strikingly improved. In addition. the coationgs had short drying time and long pot-life. This shows that the coationgs are appropriate for rapid drying coatings.

Silicone softner(SSN-3) for permanent press(PP) finish was prepared by blending beef tallow hardened oil for Improving softness, water, the emulsion, which was synthesized from pentaerythritol monostearate as a softening component and silicone oil KF-96 as a lubricating component. The prepared SSN-3 and the PP finishing resin were applied to PP finishing cotton broad cloth and P/C gingham samples using one bath method. The properties such as crease recovery, tear strength, bending resistance test were tested. The samples treated with SSN-3 and PP finishing resin have improved properties, compared with nontreated samples, those treated only with PP finishing resin, those treated with commercial PP finishing softners and PP finishing resin. Also from the bending resistance test, the two kinds of fabric samples treated with SSN-3 of 3% showed grade 5 and these were good enough in feeling.

The Hydrolysis kinetics of Benzoyl Styrene Derivatives[I]${\sim}$[IV] was investigated by ultraviolet spectrophotometery in 5% dioxane-$H_2O$ at $40^{\circ}C$. The structure of these compounds were ascertained by means of ultraviolet, melting point, IR and NMR spectra. The rate equations which were applied over a wide pH range (pH $1.0{\sim}13.0$) were obtained. The substituent effects on Benzoyl styrene derivatives[I]${\sim}$[IV] were studied, and the hydrolysis were facilitated by electron attracting groups. On the basis of the rate equation and substitutent effect and final product, the plausible hydrolysis reaction mechanism was proposed: At pH 1.0${\sim}$pH 9.0, not relevant to the hydrogenl ion concentration, neutral $H_2O$ molecule competitively attacked on the double bond. By contrary. Above pH 9.0, It was proportional to concentration of hydroxidel ion.

The antioxidative effect of ethanol extract of ginger on mackerel pike(Colorabis saira) flesh was investigated by periodically measuring TBA value and perioxide value(POV) during storage. The ethanol extract of ginger was added to minced mackerel pike flesh and the fish oil by concentration(2%, 4%, 6%, 8%). Then the minced flesh was storaged at $-5^{\circ}C$ and the fish oil was incubated at $40^{\circ}C$. The TBA values of minced flesh were approximately increased in inverse proportion to concentration of ginger extract. Peroxide values were attended with the same effect as TBA value in the aggregate. In addition, The relationship between $TBA_{37^{\circ}C-2hrs}$ of the minced flesh and their lipid oxidation during storage at -$5^{\circ}C$ for 4 weeks was observed(r=O.98). $TBA_{37^{\circ}C-2hrs}$ can be expressed as the susceptibility to lipid oxidation of minced mackerel pike flesh during storage. In the results, the antioxidative effect of alcohol extract of ginger on mackerel pike flesh was observed.

각종 세정제의 난용 및 과대 사용으로 인한 수질오염이 날로 심각해지고 있으며 이 때 수질오염의 원인은 주로 계면활성제에 의해 발생한다. 본 연구는 이미 다졸린으로부터 유도된 9종의 양쪽성계면활성제와 석유 화학물질로부터 제조하여 대량 사용하고 있는 sodium lauryl sulfate(SLS)에 대한 세정성을 비교하여 보다 우수한 계면활성제를 선정하고자 한다. 또한 세정성의 비교는 세정력의 측정과 세정에 관한 물리화학적 측면에서 그 원인을 규명하고자 한다. 1-(2-hydroxyethyl)-1-(3-sulfonatedropy)-2-undecyl-2-imidazolinum [IV]는 세정성 및 다른 기초적 물성이 우수하여 세정제에 응용할 경우 세정성이 우수한 계면활성제 일수록 오염 부착에 필요한 일이 적게 나타나 오염이 쉽게 제거될 수 있음을 증명하였으며 그로 인한 공업적 응용성에 기대가 크다.

To investigate of the content of fatty acids and cholesterol level in Raja Skates, the skate was purchesed from Yangdong Fisheries market in Kwangju, Korea. The experimental skate contained moisture 77.1%, crude protein 20.5%, crude lipid 0.68% and ash 1.72% as the general components. The fatty acids composition of skate are 28 kinds, such as 10 kinds of saturated fatty acid and 18 kinds of unsaturated fatty acid. There are 5 kinds of odd numbered fatty acid, such as C15:0, C17:0, C19:0, C25:0. Lignoceric acid shows 11% content. As an unsaturated fatty acid, getoleic acid, C22:1: selecholeic acid, C24:1:9, 12-hexadecadienic acid, C16:2: trans-linolelaidic acid, C18:2:13, 16-docosadienoic acid, C22:2: are analyzed as the particular one. The p/s ratio of skates is 1.02 and n-3/n-6 ratio of Skates is 0.82, respectively. The content of cholesterol level of Skates muscle is less than 20mg%, and liver contains 300-500 mg% and Nechang-tang contains 100mg% each.

Oil dispersants using polyoxyethylene monooleate, polyoxyethylene oleylether, and poly(oxypropylene-oxyethylene)glycol block copolymer were prepared, and oil dispersant efficiency was measured using vertical shaking flask method to 4 kinds of Bunker B oil with different physical properties by appling the prepared dispersants. Although the dispersant efficiency was differed according to the differences of physical properties of Bunker B oil, the dispersant prepared using polyoxyethylene oleylether was the most effective to disperse the oil into water. The impurities like surfur contained in sample oil have to be removed by filteration to obtain the correct degree of absorption using UV spectrophotometer.

Ham, sausage and bacon were treated with common household processing techniques including refrigerated storage(0, 14, 28 days) and cooking(pan-frying, microwaving, boiling). Lipid oxidation was evaluated by measuring fatty acid composition, malonaldehyde(MA), TBA values and by measuring fluorescent products. Major fatty acid composition were oleic acid and followed respectively palmitic acid, stearic acid, linoleic acid, linolenic acid. There was no significant difference in fatty acid composition by cooking method but there was a tendency of being increased of unsaturated fatty acid during 28days storage. Ma, TBA and fluorescent products showed a tendency of being increased continually according to storage days rather than cooking method.

Some weight loss accelerating agents, dodecyltrimethylammonium chloride(DTAC), dodecyltrimethylammonium bromide(DTAB), dodecyldimethylammonium chloride(DDBAC), polyoxyethylene(2) dodecylbenzylammonium chloride(PDBAC), and 1-(2-hydroxyethyl)-1-benzyl-2-undecylimidazolinium chloride(AEUIC), were synthesized. As a result of weight loss treatment of the weight loss accelerating agents with NaOH to PET fiber, the increase of weight loss was the order of PDBAC > DDBAC > DTAC > DTAB > AEUIC. Among the weight loss accelerating agents, AEUIC hardly showed weight loss effect, and it was separated into two layer in the NaOH solution at the treatment concentration above 6g/L, but POBAC showed good weight loss effect of 21% that approach almost to a theoretical weight loss, 21.6%, at the concentration above 8g/L.

To prepare a O/W type durable softner(OESA), octadecamidoethylaminoethyl dodecate and tetra (2-dodecamidoethyl) urea synthesized as the main components of softner, were blended with polyoxyethylene(20) oleyl ether, sorbitan sesquioleate, and polyoxyethylene(7) stearyl ether in various compositions. Emulsion stability of OESA was good, and mixed HLB value was 9.7, OESA was found was to be good durable softner for nylon through the examination of softness, lubriation, antistatic property, bending resistance, and color fastness.

미셀반응, 유화중합, 상간이동촉매반응 등에 이용되는 계면활성제가 갖고 있는 문제점을 해결하기 위하여 반응 후 분해되는 분해성 계면활성제를 합성하였다. 케탈이나 아세탈반응에 의하여 이루워진 1,3-디옥솔란 고리가 산수용액 중에서 불안정해 쉽게 가수분해로 계면활성을 띠지 않는 분해성 계면활성제를 합성하였다. 합성된 화합물은 백색결정상태로 얻었으며 수율은 90% 이상이었다. 그리고 이 화합물과 중간생성물은 얇은막 크로마토그래피와 컬럼 크로마토그래피로 분리하여 적외선과 수소핵자기공명 및 원소분석 스텍트라로 그 화합물들의 구조를 확인하였다.

케탈이나 아세탈반응에 의하여 이루어진 1, 3-디옥솔란 고리가 산수용액 중에서 불안정해 쉽게 가수분해되는 성질을 이용하여 소수부로는 지방산의 탄화수소사슬을 친수부로는 소디움 카르복시산(Soap)을 도입하여 분해 후 계면활성을 띠지 않는 분해성 계면활성제이다. 이 화합물의 수용액에 대한 표면장력은 31dyne/cm였고, 임계미셀농도는 $1.0{\times}10^{-3}mol/L$이었다. 기포력은 비교적 좋지 않았으며, 유화력은 콩기름보다 벤젠에서 양호하였다. 또한 이 화합물의 산분해 특성을 1wt% 수용액과 벤젠 사이의 계면장력 변화에 의하여 측정한 결과 pH 1 ${\sim}$ 4범위에서 약 300분 안에 모두 가수분해됨을 확인하였다.

The Synthesis of long chain fatty acid containing azobenzene and $(C_{n}-Azo)$ was optimized, starting from p-(p'-hydroxy phenyl azo)-benzoic acid and the product of reaction containing azobenzene chromophores was investigated by ultraviolet spectrophotometery in chloroform solvent at the various temperature. In addition, Reversibility and stability of azo compounds have been measured by means of Ultraviolet and the structure of these compound were ascertained by means of FT-IR and NMR. Recrystallization of reaction product in the solvent results the experimental yield obtained about 62.93% p-(p'-octadecyloxy phenyl azo)-benzoic acid. Long chain azobenzene derivatives in chloroform solution are induced photoisomerization by u. v. and visible light irradiation. The solution of long chain fatty acids$(C_{n}-Azo)$ containing azobenzene are possible of being applied to functional molecular devices such as photomemory and light switching.

Hexyltriphenylphosphonium-TCNQ(HTPP-TCNQ) complex for preparing organic thin film by Langmuir-Blodgett technique was synthesized from LiTCNQ and Hexyltriphenylphosphonium bromide. The structure of the new complex was confirmed by $^{1}H$ NMR, $^{31}P$ NMR, IR, UV spectroscopies, TGA and elemental analysis. A stability to spreading solvent, which is acetonitrile, ethylacetate, ethanol and acetonitrile-ethylacetate(1:1 v/v), of HTPP-TCNQ complex was investigated by UV-visible spectrophotometer. The complex was stabilized in acetonitrile, ethylacetate, aceton, acetonitrile-ethylacetate (1:1 v/v) for 6 h.

Conventional alkaline catalytic procedure, including sodium methoxide-methanol N, N, N', N'-tetramethyl guanidine-methanol, and acid-catalytic methods of $BF_{3}-methanol$ and HCI-methanol, have been applied for preparing methyl esters from the triacylglycerols of Trichosanthes kirilowiil seeds containing conjugated trienoic acids. The alkaline catalytic methods produce the methyl esters quantitatively without isomerization of the conjugated trienoic acids, but the acid-catalytic ones destroy almost the molecules of conjugated trienoic acids during transesterification of the triacylglycerols although the molar ratios of monoenoic and dienoic acids (non-conjugated) to saturated acids are in good agreement with those obtained from the alkaline methods.

Ultra thin films of Tetra-3-hexadecylsulphamoylcopperphthalocyanine(HDSM-CuPc) were formed on various substrates by Langmuir-Blodgett method, where HDSM-CuPc was synthesized by attaching long-chain alkylamine(hexa-decylamine) to CuPc. The reaction product was identified with FT-IR, UV-visible absorption spectroscopies, elemental analysis and thin layer chromatography. The formation of Ultrathin Langmuir-Blodgett(LB) films of HDSM-CuPc was confirmed by FT-IR and UV-visible spectroscopies. A quartz piezoelectric crystal coated with LB films of HDSM-CuPc was examined as a gas sensor for $N0_2$ gas. HDSM-CuPc LB films were transferred to a quartz crystal microbalance(QCM) in the form of Z-type multilayers. Response characteristics of film-coated QCM to $NO_2$ gas concentrations over a range of $100{\sim}600ppm$ have been tested with a thickness of $5{\sim}20$ layers of HDSM-CuPc. Changes in frequency by adsorption of $NO_2$ were increased With the number of LB layers and $NO_2$ concentration, but the response time was slow.