In this study, we designed color of tunable and high efficient organic materials using the quantum dynamics and the semi-empirical calculation, and applied this results to the fabrication of organic light-emitting diodes. Also we optimized the molecular structure of phosphorescent materials and the energy transfer from a host to a dye which makes organic light-emitting diodes improve. Using quantum dynamics method, the molecular structures of ligand only and the whole metal chelate were optimized, and these energy levels were calculated. From this test results, we could understand the emission mechanism of phosphors with various ligands as well as design the proper ligands reducing the T-T annihilation and the carrier lifetime. We also could design ligands with various colors using this test method.

In this study, spherical $pre-BaTiO_3$ particles are prepared by gelation and aging process in autoclave without catalysts. The (Ba-Ti) gel used as a starting material was prepared by aging mixtures of titanyl acylate with barium acetate aqueous solution([glacial acetic acid (AcOH)]/[titanium isopropoxide (TIP)] 4, [barium acetate]/[TIP] 1) at $45^{\circ}C$ for 48hrs. XRD and SEM results for the (Ba-Ti) gel sample at aging process showed that the gel was formed via aggregation of the fine particles. It seems to be the primary particles of bulk (Ba-Ti) gel amorphous, but the spatial arrangement of barium and titanium in the (Ba-Ti) gel is similar to that in crystalline $BaTiO_3$ particles. From XRD and FT-IR. spectroscopy analysis it was found that the crystal structure of the prepared particles continuously transformed from amorphous to tetragonal as the calcination temperature increased, and crystallized spherical cubic and tetragonal $BaTiO_3$ powder obtained at the very low calcination temperature between $500^{\circ}C$ and $900^{\circ}C$ after 1hrs of heat treatment respectively. According to BET analysis result, final particle have pore structure of ink bottle shape which is produced by aggregation of fine spherical particles with surface area of $280m^2/g$ and average pore size of 130nm.

We investigated the electrochemical properties for Langmuir-Blodgett (LB) films mixed with 4-octyl-4'-(5-carboxylpentamethyleneoxy)azobenzene (denoted as 8A5H) and $phospholipid(L-{\alpha}-dimyristoylphosphatidylcholine$, denoted as DMPC). LB films of 8A5H monolayer and 8A5H-DMPC were deposited by using the Langmuir-Blodgett method on the indium tin oxide(ITO) glass. The electrochemical properties measured by using cyclic voltammetry with a three_electrode system, an Ag/AgCl reference electrode, a platinum wire counter electrode and LB film-coated ITO working electrode at various concentrations(0.1, 0.5, and 1.0mol/L) of $NaClO_4$ solution. A measuring range was reduced from initial potential to -1350mV, continuously oxidized to 1650mV and measured to the initial point. The scan rates were 50, 100, 150 and 200mV/s, respectively. As a result, LB films of 8A5H monolayer appeared irreversible process caused by only the oxidation current from the cyclic voltammogram and LB films of 8A5H-DMPC mixture were found to be caused by a reversible oxidation-reduction process.

Fatty acid compositions of the seed oils of P. schinseng, A. continentalis and A. sessiliflorus, were analyzed by gas chromatography (GC) equipped with a capillary column. A large unusual peak was observed just before the peak corresponding to oleic acid $(cis-9-C_{18:1})$. This unknown fatty acid was isolated by silver ion chromatography and then derivatized into the picolinyl ester. The mass spectrum of the picolinyl ester showed molecular ion at m/z=373 with other diagnostic ions such as m/z=178, 218, 232, 246, 274, 288, 302 and 344. Characteristic absorption peaks at $720\;cm^{-1}$, $1640\;cm^{-1}$ and $3010\;cm^{-1}$ in IR spectrum indicated the presence of cis-configurational double bond in the molecule. The $^1H-NMR$ spectrum of this acid gave two quintets centered at ${\delta}1.638$ (2H, C-3) and ${\delta}1.377$ (2H, C-4), and two multiplets centered at ${\delta}2.022{\sim}2.047$ (2H, C-5) and ${\delta}2.000{\sim}2.022$ (2H, C-8), and multiplet signals of olefinic protons centered at ${\delta}5.3015{\sim}5.3426$ (C-6, J=9.5 Hz) and ${\delta}\;5.3465{\sim}5.3877$ (C-7, J=9.5 Hz). The $^13C-NMR$ spectrum showed 18 carbon resonance signals including an overlapped signal at ${\delta}29.7002$ for C-12 and ${\delta}29.6520$ for C-13 (or they can be reversed), and other highly resolved signals at ${\delta}33.950$, ${\delta}24.558$, ${\delta}26.773$ and ${\delta}27.205$ due to C-2, C-3, C-5 and C-8 of a ${\Delta}^6-octadecenoic$ acid, respectively. From analysis results this unknown fatty acid could be identified as cis-6-octadecenoic acid. The seed oils of P. schinseng and A. sessiliflorus contained petroselinic acid (59.7%, 56.0%), oleic acid (18.3%, 6.1%) and linoleic acid (16.2%, 30.4%) with small amount of palmitic acid (3.0%, 3.1%) while the seed oil of A. continentalis comprised mainly oleic acid (30.2%), petroselinic acid (29.0%), linoleic acid (24.1%) and palmitic acid (13.1%).

This study was conducted to prepare acrylic removable protective coatings by emulsion polymerization. Monomers used were n-butyl acrylate, acrylonitrile, butyl methacrylate. Emulsifiers used were sodium lauryl sulfate and polyoxyethylene lauryl ether, which are an anionic emulsifier and a nonionic emulsifier respectively. Potassium persulfate was used as an initiator and polyvinyl alcohol was used as a stabilizer. Emulsion polymerization was carried out in a semi-batch reactor at $70^{\circ}C$ and agitation speed was 200 rpm. Tensile strength, extension, peel strength, viscosity, and solid contents of the synthesized coatings were examined. The coatings prepared with BA:AN = 60:20 (in weight ratio) satisfied the standard for automobile in terms of extension and peel strength. When the concentration of BMA was in a range of $18{\sim}23$ wt%, the prepared coatings satisfied the standard for automobile in terms of peel strength and water resistance.

On the analysis of triacylglycerol (TG) from the kernels of Acanthopanax sessiliflorus by reversed phase-HPLC, it was separated into three main fractions of PN 44, 46 and 48, according to partition number (PN). On the contrary, it could be clearly classified into seven fractions of SMM, MMM, SMD, MMD, SDD, MDD and MDT by silver ion-HPLC by the number of double bond in the acyl chains of TG species. But resolution of so-called critical pairs of TG molecular species such as molecular pairs of $P_eLL$ $[C_{18:1{\omega}12}/(C_{18:2{\omega}6)2}]$ and OLL $[C_{18:1{\omega}9}/(C_{18:2{\omega}6)2}]$ and OOL $[(C_{18:1{\omega}9)2}/C_{18:2{\omega}6]$, and $P_eP_eL$ $[(C_{18:2{\omega}12)2}/C_{18:1{\omega}6]$ was not achieved $(P_e;$ petroselinic acid, L; linoleic acid, O; oleic acid). On the other hand, TG extracted from Aralia continentalis kernels were also fractionated into seven groups of SSM, SMM, MMM, SMD, MMD, SDD and MDD (S; saturated acid, M; monoenoic acid, D; dienoic acid) by silver ion-HPLC, although it's were classified into three groups of PN 44, 46 and 48 by reversed phase-HPLC. The fractions of SMM, MMM, MMD and MDD were divided into two subfractions, respectively; the fractions of SMM, MMM, MMD and MDD were resolved into the subfraction of $PP_e/P_e$ and POO (critical pairs from each other), that of $P_e/P_e/P_e$ and OOO, that of $P_e/P_e/L$ and OOL, and that of $P_e/L/L$ and OLL.

It is interesting to discover the reaction kinetics of the newly developed molybdenum containing catalysts. The dissociation/adsorption of nitrogen on molybdenum surface is known to be structure sensitive, which is similar to that of nitrogen on iron surface. The rates over molybdenum nitride catalysts are increased with the increase of total pressure. This tendency is the same as that for iron catalyst, but is quite different from that for ruthenium catalyst. The activation energies of the molybdenum nitride catalysts are almost on the same level, although the activity is changed by the addition of the second component. The reaction rate is expressed as a function of the concentration of reactants and products. The surface nature of $CO_3Mo_3N$ is drastically changed by the addition of alkali, changing the main adsorbed species from $NH_2$ to NH on the surface. The strength of $NH_x$ adsorption is found to be changed by alkali dopping.

The physical characteristics of polyurethane were examined by SEM, FT-IR tensile strength and mole % [NCO/OH]. Growing concerns in the environment-friendly architecture and public works have led to the development of solvent-free formulations that can be cured and foamed in air. Compared with general packing materials, this resin is much stronger in intensity and much longer in durability. Polyurethane foam resins were mainly composed of polyol, MDI, silicone surfactant, fillers, catalyst and blowing agent. The rigid foam of polyurethane in mechanical characteristics were due to chain extender and the increase of mole % [NCO/OH]. The change in the microstructure of polyurethane should be taken into account when considering the process of construction and durability through the polyurethane polymer resin in lots of industries.

Copolymers (HSA-98-20, HSA-98-0, HSA-98+20) which are acrylic resin containing 80% solid content were synthesized by the reaction of monomers, including methyl methacrylate, n-butyl acrylate, and 2-hydroxyethyl acrylate with a functional monomer, such as acetoacetoxyethyl methacrylate (AAEM), which may improve in cross-linking density and physical properties of films. The physical properties of prepared acrylic resins, containing AAEM, are as follows : viscosity, $1420{\sim}5760cps$ ; number average molecular weight, $2080{\sim}2300$ ; polydispersity index, $2.07{\sim}2.19$ ; conversions, $88{\sim}93%$, respectively. To prepare acryl resins, four kinds of initiators including ${\alpha},{\alpha}'-azobisisobutyronitirile$ (AIBN), di-tert-butyl peroxide (DTBP), t-amylperoxy-2-ethyl hexanoate (APEH), benzoyl peroxide (BPO) were used. The viscosity of the acrylic resins prepared with these initiators was increased in the order of DTBP>APEH>AIBN>BPO. APEH was proved as a suitable initiator in this study. Shear rates of acrylic resins were constant in respect to viscosity. From these results, it would appear that the resins have Newtonian flow characteristics and good workability.

In the previous study, three kinds of monomers and the functional monomer, acetoacetoxyethyl methacrylate (AAEM), which could improve the film property and cross-linkage, were polymerzied into acrylic resin copolymers (HSA-98-20, HSA-98-0, HSA-98+20) containing 80% solid content. In this study, the high-solid coatings(HSA-98-20C, HSA-98-0C, HSA-98+20C) were prepared by the curing reaction between acrylic resins containing 80% solid content and isocyanate at room temperature. Various properties were examined for the film coated with the prepared high-solid coatings. The introduction of AAEM in the coatings enhanced the abrasion resistance and solvent resistance of coatings, which indicated the possible use of high-solid coatings for top-coating materials of automobile. The curing times measured by viscoelastic measurement were 350, 264, and 212 min for HSA-98-20C, HSA-98-0C, and HSA-98+20C, respectively. This shows that the curing times become shorter with increasing $T_g$ values.

In general, water treatment sludge (WTS) had high concentration of heavy metal, thus it made the reuse or recycling of WTS difficult. The optimal solidification conditions for maximum suppression of heavy metal elution from WTS were decided in this study. Under the optimal solidification conditions (i.e., temperature, $320^{\circ}C;$ ratio of WTS and MgO, 9:1; solidification time, 1hr), all of heavy metal including aluminum were not detected. Therefore there are no problems for reuse or recycling of WTS which was solidified under the optimal solidification conditions found in the study.