• IEIE Transactions on Smart Processing and Computing
• /
• 제4권3호
• /
• pp.189-193
• /
• 2015

This paper provides the design techniques of a successive approximation register (SAR) type 12b analog-to-digital converter (ADC) for distributed maximum power point tracking (DMPPT) control in a photovoltaic system. Both a top-plate sampling technique and a $V_{CM}$-based switching technique are applied to the 12b capacitor digital-to-analog converter (CDAC). With these techniques, we can implement a 12b SAR ADC with a 10b capacitor array digital-to-analog converter (DAC). To enhance the accuracy of the ADC, a single-to-differential converted DAC is exploited with the dual sampling technique during top-plate sampling. Simulation results show that the proposed ADC can achieve a signal-to-noise plus distortion ratio (SNDR) of 70.8dB, a spurious free dynamic range (SFDR) of 83.3dB and an effective number of bits (ENOB) of 11.5b with bipolar CMOS LDMOD (BCDMOS) $0.35{\mu}m$ technology. Total power consumption is 115uW under a supply voltage of 3.3V at a sampling frequency of 1.25MHz. And the figure of merit (FoM) is 32.68fJ/conversion-step.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제15권5호
• /
• pp.504-510
• /
• 2015

This paper presents a power and area efficient SAR ADC for multi-channel near threshold-voltage (NTV) applications such as neural recording systems. This work proposes a split dual-capacitive-array (S-DCA) structure with shifted input range for ultra low-switching energy and architecture of multi-channel single-ended SAR ADC which employs only one comparator. In addition, the proposed ADC has the same amount of equivalent capacitance at two comparator inputs, which minimizes the kickback noise. Compared with conventional SAR ADC, this work reduces the total capacitance and switching energy by 84.8% and 91.3%, respectively.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제17권3호
• /
• pp.387-400
• /
• 2017

A new junction-splitting based SAR ADC with a redundant searching capacitor array structure in $0.13{\mu}m$ CMOS process to alleviate capacitor mismatch effects, is presented. The normalized average power has a factor of 0.35 to the conventional SAR ADC at 10-bit conversion accuracy. Statistical experiments show the number of missing codes resulting from the mismatch reduces by 95% for 3% unit-capacitor mismatch ratio, while keeping the conversion energy to that of the conventional JS capacitor array.

• 전기학회논문지
• /
• 제60권2호
• /
• pp.325-329
• /
• 2011

This paper introduces the 10b 1MS/s SAR ADC with double sampling technique to reduce the power consumption. The SAR ADC is implemented in CMOS 1P8M 65nm technology and occupies 0.11um2. The maximum sampling rate is 1MS/s. The simulated SNDR and SFDR are 55.6dB and 62.7dB at 484kHz input frequency, respectively. The implemented data converter consumes 507uW with 1.2-V supply.

• 센서학회지
• /
• 제30권4호
• /
• pp.223-228
• /
• 2021

This work presents a low-power CMOS image sensor (CIS) with a multi-column-parallel (MCP) readout structure while focusing on improving its performance compared to previous works. A delta readout scheme that utilizes the image characteristics is optimized for the MCP readout structure. By simply alternating the MCP readout direction for each row selection, additional memory for the row-to-row delta readout is not required, resulting in a reduced area of occupation compared to the previous work. In addition, the bias current of a pre-amplifier in a successive approximate register (SAR) analog-to-digital converter (ADC) changes according to the operating period to improve the power efficiency. The prototype CIS chip was fabricated using a 0.18-㎛ CMOS process. A 160 × 120 pixel array with 4.4 ㎛ pitch was implemented with a 10-bit SAR ADC. The prototype CIS demonstrated a frame rate of 120 fps with a total power consumption of 1.92 mW.

• Journal of Semiconductor Engineering
• /
• 제1권3호
• /
• pp.81-87
• /
• 2020

An instrumentation amplifier (IA) and an analog-to-digital converter (ADC) are essential circuit blocks for accurate and robust sensor readout systems. This paper introduces recent advances in radiation-hardening by design (RHBD) techniques applied for the sensor readout integrated circuits (IC), e.g., the three-op-amp IA and the successive-approximation register (SAR) ADC, operating against total ionizing dose (TID) and singe event effect (SEE) in harsh radiation environments. The radiation-hardened IA utilized TID monitoring and adaptive reference control to compensate for transistor parameter variations due to radiation effects. The radiation-hardened SAR ADC adopts delay-based double-feedback flip-flops to prevent soft errors which flips the data bits. Radiation-hardened IA and ADC were verified through compact model simulation, and fabricated CMOS chips were measured in radiation facilities to confirm their radiation tolerance.

• 센서학회지
• /
• 제26권5호
• /
• pp.348-352
• /
• 2017

In this paper, we propose a high resolution A/D converter for a sensor interface that processes low frequency AC signals. A 6b SAR ADC with low power consumption and a 11b incremental ADC with high resolution are combined together to perform 15b resolution. Conventional hybrid ADC has a disadvantage that it can convert t only DC signal, but in this paper, it is possible to convert data to AC signal by increasing input range of incremental ADC. The decimation filter is implemented on-chip. The designed Hybrid ADC operates at supply voltage of 1.8V and consumes the current of 6.98uA. The OSR (oversampling ratio) is 90. And SFDR, SNDR, ENOB and FoMs are 96.59dB, 88.47dB, 14.4-bit and 139.5dB, respectively.

• 전자공학회논문지
• /
• 제54권2호
• /
• pp.47-52
• /
• 2017

본 논문에서는 생체 신호 처리를 위한 중간 속도를 갖는 A/D 변환기 설계를 위하여 1.8V 전원의 CMOS SAR(Successive Approximation Register) A/D 변환기를 설계하였다. 본 논문에서 C-DAC Array의 MSB단을 4분할하여 선형성을 향상시킨 10비트 SAR A/D 변환기 설계를 제안한다. 아날로그 입력이 인가되는 MSB 단의 전하가 충전되는 시간을 확보하여 선형성을 높였다. MSB단이 아날로그 입력을 샘플링하는 블록이기 때문에 초기 값을 보다 정교하게 받아들이는 원리를 통해 선형성을 확보하였다. C-DAC에서 Split 커패시터를 사용하여 면적을 최소화하고, 전력을 감소시켰다. 제안된 SAR A/D 변환기는 0.18um CMOS 공정을 이용하여 설계하였고, 공급 전압 1.8V에서 4MS/s의 변환속도를 가지며, 7.5비트의 ENOB(Effective Number of Bit)이 측정되었다. $850{\times}650um^2$의 면적, 총 전력소모는 123.105uW이고, 170.016fJ/step의 FOM(Figure of Merit)을 확인할 수 있다.

• IEIE Transactions on Smart Processing and Computing
• /
• 제4권1호
• /
• pp.51-58
• /
• 2015

This paper proposes a 10-b SAR ADC. To increase the conversion speed and reduce the power consumption and area, redundant cycles were implemented digitally in a capacitor DAC. The capacitor DAC algorithm was straightforward switching, which included digital error correction steps. A prototype ADC was implemented in CMOS $0.18-{\mu}m$ technology. This structure consumed $140{\mu}W$ and achieved 59.4-dB SNDR at 1.25MS/s under a 1.8-V supply. The figure of merit (FOM) was 140fJ/conversion-step.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2008년도 하계종합학술대회
• /
• pp.461-462
• /
• 2008

An elaborate Simulink model for a nonredundant 10bit 20MSPS SAR ADC is proposed to verify its algorithm and to consider the real transistor-level issues of analog blocks. Some electrical trade-offs and power issues are considered.