• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.4
• /
• pp.785-792
• /
• 2012

In this paper, a current-voltage characteristics of n-channel junctionless and inversion mode(IM) MuGFET, and p-channel junctionless and accumulation mode(AM) MuGFET has been measured and analyzed for the application in high speed and low power switching devices. From the variation of the threshold voltage and the saturation drain current with the substrate bias voltages, their variations in IM devices are larger than junctionless devices for n-channel devices, but their variations in junctioness devices are larger than AM devices for p-channel devices. The variations of transconductance with substrate biases are more significant in p-channel devices than n-channel devices. From the characteristics of subthreshold swing, it was observed that the S value is almost independent on the substrate biases in n-channel devices and p-channel junctionless devices but it is increased with the increase of the substrate biases in p-channel AM devices. For the application in high speed and low power switching devices using the substrate biases, IM device is better than junctionless devices for n-channel devices and junctionless device is better than AM devices for p-channel devices.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.1
• /
• pp.135-141
• /
• 2014

In this paper, the device design guideline to reduce the threshold voltage variation with fin width in junctionless MuGFET has been suggested. It has been observed that the threshold voltage variation was increased with increase of fin width in junctionless MuGFETs. To reduce the threshold voltage variation with fin width in junctionless MuGFETs, 3-dimensional device simulation with different gate dielectric materials, silicon film thickness, and an optimized fin number has been performed. The simulation results showed that the threshold voltage variation can be reduced by the gate dielectric materials with a high dielectric constant such as $La_2O_3$ and the silicon film with ultra-thin thickness even though the fin width is increased. Particularly, the reduction of the threshold voltage variation and the subthreshold slope by reducing the fin width and increasing the fin numbers is known the optimized device design guideline in junctionless MuGFETs.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.9
• /
• pp.2133-2138
• /
• 2013

In this paper, the variation of a steep subthreshold slope at elevated temperature in nanowire n-channel junctionless and inversion mode MuGFETs has been compared. It has been observed that the subthreshold slopes are increased with the increase of the operation temperature in junctionless and inversio-mode transistors. The variation of a subthreshold slope with operation temperature is more significant in junctionless transistor than inversion-mode transistor. The temperature dependence on the variation of a subthreshold slope for different fin widths shows a similar behavior regardless of fin width. From the temperature dependence on the variation of a subthreshold slope for different substrate biases, it has been observed that the variation of a subthreshold slope is less significant when the substrate bias was applied. It is worth noting that one can achieve a subthreshold slope of below 41mV/dec at elevated temperature of 400K using the junctionless MuGFETs with a positive substrate bias.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.49 no.1
• /
• pp.8-14
• /
• 2012

The device performances of n-channel MuGFET with different fin numbers and fin widths but the total effective channel width is constant have been characterized. Two kinds of Pi-gate devices with fin number=16, fin width=55nm, and fin number=14, fin width=80nm have been used in characterization. The threshold voltage, effective electron mobility, threshold voltage roll-off, inverse subthreshold slope, PBTI, hot carrier degradation, and drain breakdown voltage have been characterized. From the measured results, the short channel effects have been reduced for narrow fin width and large fin numbers. PBTI degradation was more significant in devices with large fin number and narrow fin width but hot carrier degradation was similar for both devices. The drain breakdown voltage was higher for devices with narrow fin width and large fin numbers. With considering the short channel effects and device degradation, the devices with narrow fin width and large fin numbers are desirable in the device layout of MuGFETs.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.8 no.4
• /
• pp.302-310
• /
• 2008

This paper puts forward an advanced consideration on the design of scaled multiple-gate FET (MuGFET); the aspect ratio ($R_{h/w}$) of the fin height (h) to fin width (w) of MuGFET is considered with the aid of 3-D device simulations. Since any change in the aspect ratio must consider the trade-off between drivability and short-channel effects, it is shown that optimization of the aspect ratio is essential in designing MuGFET's. It is clearly seen that the triple-gate (TG) FET is superior to the conventional FinFET from the viewpoints of drivability and short-channel effects as was to be expected. It can be concluded that the guideline of w < L/3, where L is the channel length, is essential to suppress the short-channel effects of TG-FET.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.8
• /
• pp.1885-1890
• /
• 2013

In this paper, the electrical properties of nanoscale junctionless p-channel MuGFET at cryogenic temperature have been analyzed experimentally. The experiment was performed using a cryogenic probe station which uses the liquid Helium. It has been observed that the drain current oscillation at low drain voltage and cryogenic temperature was more pronounced in junctionless transistor than in accumulation mode transistor. The reason for more marked oscillation is due to the smaller electrical cross section area of the inversion channel which is formed at the center of silicon film in junctionless transistor. It was also observed that the drain current and maximum transconductance were increased as the measurement temperature increased. This is resulted from the increase of hole mobility and the decrease of the threshold voltage as the measurement temperature increases. The drain current oscillation due to the quantum effects can be occurred up to the room temperature when the device size scales down to the nanometer level.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.43 no.4 s.346
• /
• pp.23-30
• /
• 2006

This paper describes the short-channel effect(SCE), corner effect of nano-scale MuGFETs(Multiple-Gate FETs) by three-dimensional simulation. We can extract the equivalent gate number of MuGFETs(Double-gate=2, Tri-gate=3, Pi-gate=3.14, Omega-gate=3.4, GAA=4) by threshold voltage model. Using the extracted gate number(n) we can calculate the natural length for each gate devices. We established a scaling theory for MuGFETs, which gives a optimization to avoid short channel effects for the device structure(silicon thickness, gate oxide thickness). It is observed that the comer effects decrease with the reduction of doping concentration and gate oxide thickness when the radius of curvature is larger than 17 % of the channel width.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.1
• /
• pp.151-157
• /
• 2013

In this paper, a comparative analysis of PBTI induced device degradation in nanowire n-channel junctionless and inversion mode Multiple-Gate MOSFET(MuGFETs) has been performed. It has been observed that the threshold voltage is increased after PBTI stress and the threshold voltage variation of junctionless device is less significant than that of inversion mode device. However the degradation rate of junctionless device is less significant than that of inversion mode device. The activation energy of the device degradation is larger in inversion mode device than junctionless device. In order to analyze the more significant PBTI induced device degradation in inversion mode device than junctionless device, 3-dimensional device simulation has been performed. The electron concentration in inversion mode device is equal to the one in junctionless device but the electric field in inversion mode device is larger than junctionless device.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.08a
• /
• pp.120-120
• /
• 2011

Graphene is a carbon based material and it has great potential of being utilized in various fields such as electronics, optics, and mechanics. In order to develop graphene-based logic systems, graphene field-effect transistor (GFET) has been extensively explored. GFET requires supporting devices, such as volatile memory, to function in an embedded logic system. As far as we understand, graphene has not been studied for volatile memory application, although several graphene non-volatile memories (GNVMs) have been reported. However, we think that these GNVM are unable to serve the logic system properly due to the very slow program/read speed. In this study, a GVM based on the GFET structure and using an engineered graphene channel is proposed. By manipulating the deposition condition, charge traps are introduced to graphene channel, which store charges temporarily, so as to enable volatile data storage for GFET. The proposed GVM shows satisfying performance in fast program/erase (P/E) and read speed. Moreover, this GVM has good compatibility with GFET in device fabrication process. This GVM can be designed to be dynamic random access memory (DRAM) in serving the logic systems application. We demonstrated GVM with the structure of FET. By manipulating the graphene synthesis process, we could engineer the charge trap density of graphene layer. In the range that our measurement system can support, we achieved a high performance of GVM in refresh (>10 ${\mu}s$) and retention time (~100 s). Because of high speed, when compared with other graphene based memory devices, GVM proposed in this study can be a strong contender for future electrical system applications.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.45 no.11
• /
• pp.1-7
• /
• 2008

In this work, a two dimensional, self-consistent Poisson-$Schr{\ddot{o}}dinger$ solver has been implemented to study C-V characteristics in nanometer scale MuGFETs with considering quantum effects. The quantum-mechanical effects on gate-channel capacitance for different device dimension and gate configurations of nanometer scale MuGFETs have been analyzed. It has been found that 4he gate-channel capacitance per unit gate area is increased as the device dimension decreases. For different gate configurations, the gate-channel capacitance is decreased with increase of effective gate number. Those resu1ts have been explained by the distribution profile of electron concentration in the silicon surface and inversion capacitance. The length of inversion-layer centroid has been calculated from inversion capacitance with device dimension and gate configurations.