권호 표지

전기학회논문지 (The Transactions of The Korean Institute of Electrical Engineers) (The Transactions of The Korean Institute of Electrical Engineers)

대한전기학회 (The Korean Institute of Electrical Engineers)

  • 월간
  • /
  • 1975-8359(pISSN)
  • /
  • 2287-4364(eISSN)

Aim & Scope

The first issue of The Transactions of the Korean Institute of Electrical Engineers(KIEE) was in October 1948. The Transactions of the KIEE is a monthly periodical published on the 1st day of each month. KIEE is an official publication of the Korean Institute of Electrical Engineers. The aim of the journal is to publish the highest quality manuscripts dedicated to the advancement of electrical engineering technologies. The Journal contains papers related to electrical power engineering, electrical machinery and energy conversion systems, electro-physics and application, information and controls, as well as electrical facilities. Currently, KIEE Transactions is divided into: “A” Sector (Power Engineering); “B” Sector (Electrical Machinery and Energy Conversion System); “C” Sector (Electro-physics and Application); “D” Sector (Information and Control); and “E” Sector (Electrical Facilities). With an aim to collect and publish outstanding scientific papers related to electrical engineering, the topics of papers published in KIEE Transactions are further divided into: power systems, transmission and distribution systems, electric power system economics, micro-grid, power system protection and automation, pumped-storage hydro power generation and electric energy storage systems in the “A” Sector; electrical equipment and appliances, power electronics, electrical traffic systems, new and renewable energy systems, eco-friendly electric power equipment, super-conductive equipment and E-mobility in the “B” Sector; electrical materials and semiconductors, smart large power and high voltage technology, optoelectronics and electromagnetic waves, Micro Electro Mechanical Systems (MEMS), and power asset risk management in the “C” Sector; instrumentation and control (I&C), robotics and automation, computer intelligence and intelligence systems, signal processing and embedded systems, autonomous moving object information processing, and biomedical engineering in the “D” Sector; and engineering and supervision, construction technology, power distribution system diagnosis, safety technology, electric railroad, technical standards, LVDC Facility, electric Facility fusion, etc. in the “E” Sector

http://www.trans.kiee.or.kr/ KSCI KCI SCOPUS

제65권12호

  1. 최지훈;김성열;이주 1949
    https://doi.org/10.5370/KIEE.2016.65.12.1949 PDF KSCI
    Rapid Expansion of EVs(Electric Vehicles) is inevitable trends, to comply with eco-friendly energy paradigm according to Paris Agreement and to solve the environment problems such as global warming. In this paper, we analyze the limit point of transformer acceptable capacity as the increase of power demand considering EVs supply in the near future. Through the analysis of transformer utilization, we suggest methods to analyze the spare capacity of transformer for the case of optimal efficiency operation and emergency operation respectively. We have the results of 18.4~29% spare capacity for the charging infrastructure to the rated capacity of transformer by analyzing the existing sample apartments. It is analyzed that the acceptable number of EVs is 0.09~0.14 for optimal efficiency operation and 0.06~0.13 for emergency operation. Therefore, it is analyzed the power demand of EV will exceed the existing transformer spare capacity in 7~8 years as the annual growth rate of EVs is prospected 112.5% considering current annual growth rate of EVs and the government EV supply policy.
  2. 류규상;염형선;조규정;이훈도;김철환 1958
    https://doi.org/10.5370/KIEE.2016.65.12.1958 PDF KSCI
    AC railway feeding system use single phase to supply power to the railway vehicles. And the system use the rail track as a return current path, so that current flows in the rail. In this situation inductive interference on communication system and unsafe environment can appear on railway system. Therefore knowing the current distribution of catenary system and analysing the return current is required. In this study detail return current distribution was analyzed by modeling the catenary system as 4-conductors group. The distribution characteristics and trends of return current were studied by using the PSCAD/EMTDC and FDTD method that based on Maxwell equation was used to calculate the induced voltage. Simulation code was made by MATLAB. Using this study result data, we can suggest the proper installation location of digital device and these data can be used for additional studies related to return current or induced voltage as a base data.
  3. 최수현;김규호 1965
    https://doi.org/10.5370/KIEE.2016.65.12.1965 PDF KSCI
    This paper studies generator rescheduling technique for congestion management in power system with wind farms. The proposed technique is formulated to minimize the rescheduling cost of conventional and wind generators to alleviate congestion subject to operational line overloading. The generator rescheduling method has been used with incorporation of wind farms in the power system. The locations of wind farms are selected based upon power transfer distribution factor (PTDF). Because all generators in the system do not need to participate in congestion management, the rescheduling has been done by generator selection based on the proposed generator sensitivity factor (GSF). The selected generators have been rescheduled using linear programming(LP) optimization techniques to alleviate transmission congestion. The effectiveness of the proposed methodology has been analyzed on IEEE 14-bus systems.
  4. 김회구;이복희 1971
    https://doi.org/10.5370/KIEE.2016.65.12.1971 PDF KSCI
    In this paper, electrical and physical characteristics associated with the ionization growth of soil under impulse voltages in a coaxial cylindrical electrode system to simulate a horizontally-buried ground electrode were experimentally investigated. The results were summarized as follows: Transient ground resistances decreased significantly by soil ionization. The voltage-current (V-I) curves for non-ionization in soil lined up in a straight line with the nearly same slope that is the ground resistance, but they showed a 'cross-closed loop' of ${\infty}$-shape under ionization. The conventional ground resistance and equivalent soil resistivity were inversely proportional to the peak value of injected impulse currents. On the other hand, the equivalent ionization radius and time-lag to the maximum value of ionization radius were increased with increasing the incident impulse voltages. An analysis method for the transient ground resistances of the ground electrode based on the ionization phenomena was proposed. The proposed method can be applied to analyze the transient performances of grounding systems for lightning protection in power system installations.
  5. 김태희;강상희 1979
    https://doi.org/10.5370/KIEE.2016.65.12.1979 PDF KSCI
    A protection algorithm using a voltage-controlled overcurrent element for a looped collection circuit in a wind farm is suggested in this paper. Because the proposed algorithm uses voltage relaying signals as well as current relaying signals, any fault in the looped collection circuit can be cleared by voltage-controlled overcurrent relays located at the two adjacent relaying points, the nearest place in each direction from the fault point. The algorithm can also distinguish the external faults which occur at the outside of a wind farm from the internal faults. It means that the proposed algorithm can provide the proper ability of protection coordination to the relays in the looped collection circuits of a large wind farm. The performance of the proposed algorithm is verified under various fault conditions using PSCAD/EMTDC simulations.
  6. 이원식;조규원;전병길;김규탁 1986
    https://doi.org/10.5370/KIEE.2016.65.12.1986 PDF KSCI
    The vibration soucre of motor has a electromagnetic and mechanical causes. The most widely known, electromagnetic reasons are cogging torque and RMF(Radial magnetic force). Recently, analysis of the cogging torque has been made actively. but analysis of the RMF was not filled. So, in this paper, analyzed RMF. the vibration test were performed for the basic and reduced model of cogging torque and RMF. And it analyzed for the effect of each factor on the vibration. Finally, the vibration was formulated for stator's weight and RMF. To this end, natural, cogging torque and RMF of frequency were analyzed and these relationships were considered.
  7. 권민준;김태훈;이우철 1992
    https://doi.org/10.5370/KIEE.2016.65.12.1992 PDF KSCI
    The plasma process is applied to various industrial fields such as high-tech IT industry, textiles and medical. Therefore, there is increasing interest in the plasma power supply, and demand for power devices of high efficiency and high power density is increased. Plasma power supply for process must solve the arc problem, when the plasma is unstable. The output capacitor is closely related to the arc problem. If the output capacitor is smaller, the damage from the arc problem is reduced. However, the small value of the output capacitor affects the operating characteristics of the power supply. In this paper, a LLC resonant converter is adopted, because it can achieve high efficiency and power density in the plasma DC power supply. However, due to the small value of the output capacitor, the converter is operated as a LLCC resonant converter. Therefore, a gain characteristic of LLCC resonant converter is analyzed by using the FHA (First Harmonic Approximation) in plasma power supply. Simulation and experimental results are presented to verify the characteristic analysis of LLCC Resonant Converter.
  8. 김태훈;이우철 2000
    https://doi.org/10.5370/KIEE.2016.65.12.2000 PDF KSCI
    Generally, in order to implement the CRM(Critical Conduction Mode), the analog controller is used rather than a digital controller because the control is simple and uses less power. However, according to the semiconductor technology development and various user needs, digital control system based on a DSP is on the rise. Therefore, in this paper, the CRM bridgeless PFC converter based on a digital control is proposed. It is necessary to detect the inductor current when it reaches zero and peak value, for calculating the on time and off time by using the current information. However, in this paper, the on-time and off-time are calculated by using the proposed algorithm without any current information. If the switching-times are calculated through the steady-state analysis of the converter, they do not reflect transient status such as starting-up. Therefore, the calculated frequency is out of range, and the transient current is generated. In order to solve these problems, limitation method of the on-time and off-time is used, and the limitation values are varied according to the voltage reference. In addition, in steady state, depending on the switching frequency, the inductance is varied because of the resonance between the inductor and the parasitic capacitance of the switching elements. In order to solve the problem, inductance are measured depending on the switching frequency. The measured inductance are used to calculate the switching time for preventing the transient current. Simulation and experimental results are presented to verify the proposed method.
  9. 윤철;권우현;조내수 2008
    https://doi.org/10.5370/KIEE.2016.65.12.2008 PDF KSCI
    This paper proposes analysis and suppression method for reactive power vibration of the slave motor caused by back-EMF mismatch between the master and the slave motor and stator resistance during middle-low speed operation. The master and slave motors are parallel connected dual SPMSMs(Surface mounted Permanent Magnet Synchronous Motors) fed by a single inverter. To suppress vibration of reactive power, RPC(Reactive Power Compensator) proposed in this paper analyzes flux-axis current vibration of the slave motor that occurs in middle-low speed operation using a mathematical model of the fan motor. And RPC adds vibration components detected from flux-axis current of the slave motor to flux-axis current of the master motor. The results of experiment conducted verify the efficacy of the proposed method.
  10. 김남호;김은미;허기석;여인선 2014
    https://doi.org/10.5370/KIEE.2016.65.12.2014 PDF KSCI
    Transparent, conductive electrode films, showing the particular characteristics of good conductivity and high transparency, are of considerable research interest because of their potential for use in opto-electronic applications, such as smart window, photovoltaic cells and flat panel displays. Multilayer transparent electrodes, having a much lower electrical resistance than widely-used transparent conducting oxide electrodes, were prepared by using RF/DC magnetron sputtering system. The multilayer structure consisted of three layers, [NiInZnO(NIZO)/Ag/NIZO]. The optical and electrical properties of the multilayered NIZO/Ag/NIZO structure were investigated in relation to the thickness of each layer. The optical and electrical characteristics of multilayer structures have been investigated as a function of the Ag and NIZO film thickness. High-quality transparent conductive films have been obtained, with sheet resistance of $9.8{\Omega}/sq$ for Ag film thickness of 8 nm. Also the multilayer films of inserted Ag 8 nm thickness showed a high optical transmittance above 93% in the visible range. The electrical and optical properties of the new multilayer films were mainly dependent on the thickness of Ag insertion layer.
  11. 유형석 2019
    https://doi.org/10.5370/KIEE.2016.65.12.2019 PDF KSCI
    In the presence of an electrically conducting medical lead, radio frequency (RF) coils in magnetic resonance imaging (MRI) systems may concentrate the RF energy and cause tissue heating near the lead. A novel design for a medical lead to reduce this heating by introducing pins in the lead is presented. Peak 10 g specific absorption rate (SAR) in heart tissue, an indicator of heating, was calculated and compared for both conventional (Medtronic) lead design and our proposed design. Remcom XFdtd software was used to calculate the peak SAR distribution in a realistic model of the human body. The model contained a medical lead that was exposed to RF magnetic fields at 64 MHz (1.5 T), 128 MHz (3 T) and 300 MHz (7 T) using a model of an MR birdcage body coil. The proposed design of adding pins to the medical lead can significantly reduce the heating from different MRI systems.
  12. 문지현;이호재 2023
    https://doi.org/10.5370/KIEE.2016.65.12.2023 PDF KSCI
    This paper addresses a robust controller design technique for a nonlinear underwater glider with disturbances. We consider the buoyancy and pitching moment as control inputs, which generate additional nonlinearity on the plant dynamics. To deal with the nonlinearity, we utilize the optimal linearization technique. The conditions for the optimal linearization and the controller design are formulated in terms of matrix inequalities. The effectiveness of the proposed method is demonstrated through a simulation.
  13. 이준혁;곽현철;이경중;안현식 2030
    https://doi.org/10.5370/KIEE.2016.65.12.2030 PDF KSCI
    This paper presents a hardware development procedure of the ASB(Active Seat Belt) control system to comply with ISO 26262. The ASIL(Automotive Safety Integrity Level) of an ASB system is determined through the HARA(Hazard Analysis and Risk Assessment) and the safety mechanism is applied to meet the reqired ASIL. The hardware architecture of the controller consists of a microcontroller, H-bridge circuits, passive components, and current sensors which are used for the input comparison. The required ASIL for the control systems is shown to be satisfied with the safety mechanism by calculation of the SPFM(Single Point Fault Metric) and the LFM(Latent Fault Metric) for the design circuits.
  14. 이경학;김도완 2037
    https://doi.org/10.5370/KIEE.2016.65.12.2037 PDF KSCI
    This paper presents a fuzzy-model-based design approach to the buoyancy and moment controls of a class of nonlinear underwater glider. Through the linearization and the sector nonlinearity methodologies, the underwater glider dynamics is represented by a Takagi-Sugeno (T-S) fuzzy model. Sufficient conditions are derived to guarantee the asymptotic stability of the closed-loop system in the format of linear matrix inequality (LMI). Simulation results demonstrate the effectiveness of the proposed buoyancy and moment controllers for the underwater glider.
  15. 김흠;좌동경;홍영대 2046
    https://doi.org/10.5370/KIEE.2016.65.12.2046 PDF KSCI
    Ramp metering is one of the most efficient and widely used control methods for an intelligent transportation management system on a freeway. Its objective is to control and upgrade freeway traffic by regulating the number of vehicles entering the freeway entrance ramp, in such a way that not only the alleviation of the congestion but also the smoothing of the traffic flow around the desired density level can be achieved for the maintenance of the maximum mainline throughput. When the cycle of the signal detection is larger than that of the system process, the density tracking problem needs to be considered in the form of the discrete-time system. Therefore, a discrete-time sliding mode control method is proposed for the ramp metering problem in the presence of both input constraint in the on-ramp and exogenous disturbance in the off-ramp considering the random behavior of the driver. Simulations were performed using a validated second-order macroscopic traffic flow model in Matlab environment and the simulation results indicate that proposed control method can achieve better performance than previously well-known ALINEA strategy in the sense that mainstream flow throughput is maximized and congestion is alleviated even in the presence of input constraint and exogenous disturbance.
  16. 좌동경 2053
    https://doi.org/10.5370/KIEE.2016.65.12.2053 PDF KSCI
    In this paper, we propose an output feedback tracking control method for the wheeled mobile robots with kinematic disturbances. The kinematic disturbances should be compensated to avoid the performance degradation. Also, the unavailable velocity of the mobile robot should be estimated. These should be estimated together by designing the nonlinear observer. Based on these estimates, the output feedback controller can be designed. The stability of the mobile robot control systems using the proposed method is rigorously analyzed and the simulation results are also provided to validate the proposed method.
  17. 좌동경 2057
    https://doi.org/10.5370/KIEE.2016.65.12.2057 PDF KSCI
    Range-based motion estimation of a moving object by using a camera is proposed. Whereas the existing results constrain the motion of an object for the motion estimation of an object, the constraints on the motion is relieved in the proposed method in that a more generally moving object motion can be handled. To this end, a nonlinear observer is designed based on the relative dynamics between the object and camera so that the object velocity and the unknown camera velocity can be estimated. Stability analysis and simulation results for the moving object are provided to show the effectiveness of the proposed method.
  18. 변하영;임혜숙 2061
    https://doi.org/10.5370/KIEE.2016.65.12.2061 PDF KSCI
    A Bloom filter is a space-efficient data structure popularly applied in many network algorithms. This paper proposes a vectored Bloom filter to provide a high-speed Internet protocol (IP) address lookup. While each hash index for a Bloom filter indicates one bit, which is used to identify the membership of the input, each index of the proposed vectored Bloom filter indicates a vector which is used to represent the membership and the output port for the input. Hence the proposed Bloom filter can complete the IP address lookup without accessing an off-chip hash table for most cases. Simulation results show that with a reasonable sized Bloom filter that can be stored using an on-chip memory, an IP address lookup can be performed with less than 0.0003 off-chip accesses on average in our proposed architecture.
  19. 서기성 2069
    https://doi.org/10.5370/KIEE.2016.65.12.2069 PDF KSCI
    This paper presents a methodology based on evolutionary optimization for simultaneously optimizing design parameters of controller and components of plant. Genetic programming(GP) based bond graph model generation is adopted to open-ended search for the plant. Also GP is applied to represent the controller with a unified method. The formulations of simultaneous plant-controller design optimization problem and the description of solution techniques based on bond graph are derived. A feasible solutions for a plant/controller design using the simultaneous optimization methodology is illustrated.
  20. 정갑주;이근영 2075
    https://doi.org/10.5370/KIEE.2016.65.12.2075 PDF KSCI
    The real time IAQ (Indoor Air Quality) management is very important for large buildings and underground facilities such as subways because poor IAQ is immediately harmful to human health. Such IAQ management requires monitoring, prediction and control in an integrated and real time manner. In this paper, we present three PM10 hourly prediction models for such realtime IAQ management as both Multiple Linear Regression (MLR) and Artificial Neural Network (ANN) models. Both MLR and ANN models show good performances between 0.76 and 0.88 with respect to R (correlation coefficient) between the measured and predicted values, but the MLR models outperform the corresponding ANN models with respect to RMSE (root mean square error).
  21. 정갑주;이종현;이근영;김범철 2084
    https://doi.org/10.5370/KIEE.2016.65.12.2084 PDF KSCI
    It is crucial to predict water temperature for aquatic ecosystem studies and management. In this paper, we first address challenging issues in predicting water temperature in a real time manner and propose a distributed computing model to address such issues. Then, we present an Artificial Neural Network (ANN)-based water temperature prediction model developed for the Soyang River and a cyberinfrastructure system called WT-Agabus to run such prediction models in an automated and real time manner. The ANN model is designed to use only weather forecast data (air temperature and rainfall) that can be obtained by invoking the weather forecasting system at Korea Meteorological Administration (KMA) and therefore can facilitate the automated and real time water temperature prediction. This paper also demonstrates how easily and efficiently the real time prediction can be implemented with the WT-Agabus prototype system.
  22. 김태형;박태형 2094
    https://doi.org/10.5370/KIEE.2016.65.12.2095 PDF KSCI
    In this paper, we propose an extended Kalman filter(EKF)-based simultaneous localization and mapping(SLAM) method using laser corner pattern matching for mobile robots. SLAM is one of the most important problems of mobile robot. However, existing method has the disadvantage of increasing the computation time, depending on the number of landmarks. To improve computation time, we produce the corner pattern using classified and detected corner points. After producing the corner patterns, it is estimated that mobile robot's global position by matching them. The estimated position is used as measurement model in the EKF. To evaluated proposed method, we preformed the experiments in the indoor environments. Experimental results of proposed method are shown to maintain an accuracy and decrease the computation time.
  23. 윤용호;김재문 2103
    https://doi.org/10.5370/KIEE.2016.65.12.2103 PDF KSCI
    Energy saving is as important as developments of green energy and alternative energy. This paper describes design of hybrid type streetlight for railway station with renewable energy as photovoltaic, wind, secondary battery. In designing hybrid type streetlight for railway station, generation energy with renewable energy and reliability is strongly needed to meet the demand of railway station. In order to achieve the high performance of a streetlight, photovoltaic, wind and secondary battery system, PV tracker, monitoring and GUI system with logging function are designed. To verify of performance of hybrid type streetlight for railway station, we have demonstration test to get of generation energy and flow of energy and the results are present in this paper.
  24. 한문섭;이장무;김주락;창상훈;김인동 2109
    https://doi.org/10.5370/KIEE.2016.65.12.2109 PDF KSCI
    The rate of rise of the fault current in DC grids is very high compared to AC grids because of the low line impedance of DC lines. In AC grids the arc of the circuit breaker under current interruption is extinguished by the zero current crossing which is provided naturally by the system. In DC grids the zero current crossing must be provided by the circuit breaker itself. Unlike AC girds, the magnetic energy of DC grids is stored in the system inductance. The DC circuit breaker must dissipate the stored energy. In addition the DC breaker must withstand the residual overvoltage after the current interruption. The main contents of this paper are to ${\cdot}$ Explain the theoretical background for the design of DC circuit breaker. ${\cdot}$ Develop the simulation model in PSIM of the real scaled DC circuit breaker for 1,800V DC railway. ${\cdot}$ Suggest design guidelines for the DC circuit breaker based on the experimental work, simulations and design process.
  25. 전정채;유재근 2113
    https://doi.org/10.5370/KIEE.2016.65.12.2113 PDF KSCI
    The precise detection of electric leakage point of underground power cable is very important to reduce cost and time of maintenance and prevent electric shock accident through expedite repair of electric leakage point. This paper proposes a electric leakage point detection system underground power cable using of half-period modulated transmission waveform and earth electric potential measurement. The developed system is composed of transmitter to generate the wanted pulse waveform, receiver to measure and display earth electric potential by the transmitted pulse in electric leakage point and PC Software program to display of GPS coordinate on detection cable line. The performance of the electric leakage point detection system was tested in the constructed underground cable leakage detection test bed. The test results on signal generation voltage precision of signal transmitter, mean detection earth voltage, mean detection leakage current and electric leakage point detection error showed the developed system can be used in electric leakage point detection underground power cable.
  26. 박성원;김동완;이진우 2119
    https://doi.org/10.5370/KIEE.2016.65.12.2119 PDF KSCI
    In this paper, we developed a smart black box that can monitor and record the information of the sensor from subsystem in the smart grid system. The plant is the complex power system which is integrated by solar power system, grid-connected power systems, and BESS(battery energy storage system). The black box with the web-server application can connect and synchronize to an external monitoring system and a smart phone. We hope that this system is to contribute to improve operational efficiency, reliability, and stability for the smart grid power system.
  27. 송광재;이일호;송상훈 2127
    https://doi.org/10.5370/KIEE.2016.65.12.2127 PDF KSCI
    In this paper, characteristic tests for current transformers with maximum mA secondary current of 250 mA is performed. The purpose of this paper is not only to test the mA current transformers by following the IEEE Draft Standard for Current Transformers with Maximum mA Secondary Current of 250mA, but also to take into consideration certain applications in the use of the mA CTs for billing purposes.
  28. ;;;변영철 2138
    https://doi.org/10.5370/KIEE.2016.65.12.2138 PDF KSCI
    People with visual disabilities suffer environmentally, socially, and technologically. Navigating through places and recognizing objects are already a big challenge for them who require assistance. This study aimed to develop an android-based assistive application for the visually impaired. Specifically, the study aimed to create a system that could aid visually impaired individuals performs significant tasks through object recognition and identifying locations through GPS and Google Maps. In this study, the researchers used an android phone allowing a visually impaired individual to go from one place to another with the aid of the application. Google Maps is integrated to utilize GPS in identifying locations and giving distance directions and the system has a cloud server used for storing pinned locations. Furthermore, Haar-like features were used in object recognition.
  29. 김호연;심보연;박애선;한동국 2145
    https://doi.org/10.5370/KIEE.2016.65.12.2145 PDF KSCI
    Internet generalization has led to increased demands for Internet banking. Various security programs to protect authentication information are being developed; however, these programs cannot protect the wireless communication sections of wireless keyboards. In particular, vulnerabilities have been reported in the radio communication sections of 27 MHz wireless keyboards. In this paper, we explain how to analyze M's 27 MHz wireless keyboard. We also experimentally show that an attacker can acquire authentication information during domestic Internet banking using a 27 MHz wireless keyboard. To do this, we set up an experimental encironment to analyze the electromagnetic signal of a 27 MHz wireless keyboard.
  30. 이해연 2153
    https://doi.org/10.5370/KIEE.2016.65.12.2153 PDF KSCI
    Multimedia such as image, audio, and video is easy to create and distribute with the advance of IT. Since novice uses them for illegal purposes, multimedia forensics are required to protect contents and block illegal usage. This paper presents a multimedia forensic algorithm for video to identify the device used for acquiring unknown video files. First, the way to calculate a sensor pattern noise using Wiener filter (W-SPN) is presented, which comes from the imperfection of photon detectors against light. Then, the way to identify the device is explained after estimating W-SPNs from the reference device and the unknown video. For the experiment, 30 devices including DSLR, compact camera, smartphone, and camcorder are tested and analyzed quantitatively. Based on the results, the presented algorithm can achieve the 96.0% identification accuracy.
  31. 현종욱;김선명 2159
    https://doi.org/10.5370/KIEE.2016.65.12.2159 PDF KSCI
    In the IEEE 802.11 DCF (Distributed Coordination Function) protocol, the binary exponential backoff algorithm is used to avoid data collisions. However, as the number of stations increases of, the collision probability tends to grow and the overall network performance is reduced. To solve this problem, this paper proposes a data transmission scheme based on the channel reservation method. In the proposed scheme, channel time is divided into reservation period and contention period. During the reservation period, stations succeeded in channel reservation transmit their own data packets in sequence without contention. During the contention period, each station sends its data packets through contentions as in DCF. During both the reservation period and the contention period, each station sends a request for channel reservation for the next reservation period to an AP (Access Point). After receiving such a channel reservation request from each station, the AP decides whether the reservation is succeeded and sends the result via a beacon frame to each station. Performance of the proposed scheme is analyzed through simulations. The simulation results show that the proposed scheme tends to reduce the collision probability of DCF and to improve the overall network performance.
  32. 문종호;원동호 2167
    https://doi.org/10.5370/KIEE.2016.65.12.2167 PDF KSCI
    In the multi-server environment, remote user authentication has a very critical issue because it provides the authorization that enables users to access their resource or services. For this reason, numerous remote user authentication schemes have been proposed over recent years. Recently, Lin et al. have shown that the weaknesses of Baruah et al.'s three factors user authentication scheme for multi-server environment, and proposed an enhanced biometric-based remote user authentication scheme. They claimed that their scheme has many security features and can resist various well-known attacks; however, we found that Lin et al.'s scheme is still insecure. In this paper, we demonstrate that Lin et al.'s scheme is vulnerable against the outsider attack and user impersonation attack, and propose a new biometric-based scheme for authentication and key agreement that can be used in the multi-server environment. Lastly, we show that the proposed scheme is more secure and can support the security properties.
  33. 이후진 2177
    https://doi.org/10.5370/KIEE.2016.65.12.2177 PDF KSCI
    Using the existing exact but quite complicated symbol error rate (SER) expressions for M-ary phase shift keying (M-PSK) and M-ary differential phase shift keying (M-DPSK), we derive effective and concise closed-form asymptotic SER formulas especially in Rician-Nakagami fading channels. The derived formulas can be utilized to efficiently verify the achievable error rate performances of M-PSK and M-DPSK systems for the Rician-Nakagami fading environments. In addition, by exploiting the modulation gains directly obtained from the asymptotic SER formulas, we also theoretically demonstrate that M-DPSK suffers an asymptotic SER performance loss of 3.01dB with respect to M-PSK for a given M in Rician-Nakagami fading channels at high signal-to-noise ratio (SNR).
  34. 김재의;김동민;박수환;홍정표 2183
    https://doi.org/10.5370/KIEE.2016.65.12.2183 PDF KSCI
    This paper deals with the design process for an outer-rotor-type surface-mounted permanent magnet synchronous motor (SPMSM) used in continuous variable valve timing (CVVT) systems in automobiles with internal combustion engines. When the same size, outer-rotor-type SPMSMs generate larger torque and more stable than inner-rotor-type SPMSMs. For the initial design, space harmonic analysis (SHA) is used. In order to minimize the cogging torque, an optimization was conducted using Response Surface Methodology (RSM). At the end of the paper, Finite Element Analysis (FEA) is performed to verify the performance of the optimum model.
  35. 박효성;고병권;이영일 2189
    https://doi.org/10.5370/KIEE.2016.65.12.2189 PDF KSCI
    This paper proposes a new finite control set-model predictive control (FCS-MPC) method for induction motors. In the method, the reference state that satisfies the given torque and rotor flux requirements is derived. Cost indices for the FCS-MPC are defined using the state tracking error, and a linear matrix inequality is formulated to obtain a proper weighting matrix for the state tracking error. The on-line procedure of the proposed FCS-MPC comprises of two steps: select the output voltage vector of the two level inverter minimizing the cost index and compute the optimal modulation factor of the minimizing output voltage vector in order to reduce the state tracking error and torque ripple. The steady state tracking error is removed by using an integrator to adjust the reference state. The simulation and experimental results demonstrated that the proposed FCS-MPC shows good torque, rotor flux control performances at different rotating speeds.
  36. 김동민;정영훈;임명섭;심재한;홍정표 2197
    https://doi.org/10.5370/KIEE.2016.65.12.2197 PDF KSCI
    Recently, the trend of zero emissions has increased in automotive engineering because of environmental problems and regulations. Therefore, the development of battery electric vehicles (EVs), hybrid/plug-in hybrid electric vehicles (HEVs/PHEVs), and fuel cell electric vehicles (FCEVs) has been mainstreamed. In particular, for light-duty electric vehicles, improvement in electric motor performance is directly linked to driving range and driving performance. In this paper, using an improved design for the interior permanent magnet synchronous motor (IPMSM), the EV driving range for the light-duty EV was extended. In the electromagnetic design process, a 2D finite element method (FEM) was used. Furthermore, to consider mechanical stress, ANSYS Workbench was adopted. To conduct a vehicle simulation, the vehicle was modeled to include an electric motor model, energy storage model, and regenerative braking. From these results, using the advanced vehicle simulator (ADVISOR) based on MATLAB Simulink, a vehicle simulation was performed, and the effects of the improved design were described.
  37. 노승환 2211
    https://doi.org/10.5370/KIEE.2016.65.12.2211 PDF KSCI
    The Locator/Identifier Separation Protocol (LISP) is a new routing architecture that implements a new semantic for IP addressing. It enables the separation of IP addresses into two new numbering spaces: Endpoint Identifiers (EIDs) and Routing Locators (RLOCs). This approach will solve the issue of rapid growth of the Internet's DFZ (default-free zone). In this paper, we propose an algorithm called the Propagated-Mode Mapping System to improve the map request process of LISP-DDT.
  38. 서동영;정윤원 2218
    https://doi.org/10.5370/KIEE.2016.65.12.2218 PDF KSCI
    Opportunistic routing is designed for an environment where there is no stable end-to-end routing path between source node and destination node, and messages are forwarded via intermittent contacts between nodes and routed using a store-carry-forward mechanism. In this paper, we consider PRoPHET(Probabilistic Routing Protocol using History of Encounters and Transitivity) protocol as a base opportunistic routing protocol and propose an efficient context-aware opportunistic routing protocol by using the context information of delivery predictability and node type, e.g., pedestrian, car, and tram. In the proposed protocol, the node types of sending node and receiving node are checked. Then, if either sending node or receiving node is tram, messages are forwarded by comparing the delivery predictability of receiving node with predefined delivery predictability thresholds depending on the combination of sending node and receiving node types. Otherwise, messages are forwarded if the delivery predictability of receiving node is higher than that of sending node, as defined in PRoPHET protocol. Finally, we analyze the performance of the proposed protocol from the aspect of delivery ratio, overhead ratio, and delivery latency. Simulation results show that the proposed protocol has better delivery ratio, overhead ratio, and delivery latency than PRoPHET protocol in most of the considered simulation environments.
  39. ;채상헌;김일환;양승용;부창진;김호찬 2225
    https://doi.org/10.5370/KIEE.2016.65.12.2225 PDF KSCI
    In order to overcome the problem of fossil fuel energy, electric vehicle (EV) has been used in recent years. The important issues of EV are driving distance and lifetime related to EV efficiency. A voltage source converter is one of the main components of EV which can be operated with various pulse width modulation (PWM) schemes such as continuous PWM schemes and discontinuous PWM schemes. These PWM schemes will cause the effects on the efficiency of converter system and the lifetime of EV. Therefore, this paper proposes an analysis of the PWM schemes for the power converter on the EV. The objective is to find out a best solution for the EV by comparing the total harmonic distortion (THD) and transient response between the various PWM schemes. The operation of traction motor on the EV with the PWM schemes will be verified by using Psim simulation program.
  40. 이상형;김동현;이해연 2232
    https://doi.org/10.5370/KIEE.2016.65.12.2232 PDF KSCI
    IoT industry has been highlighted in the domestic and foreign country. Since most IoT systems operate separate servers in Internet to control IoT hardwares, there exists the possibility of security problems. Also, IoT systems in markets use their own hardware controllers and devices. As a result, there are many limitations in adding new sensors or devices and using applications to access hardware controllers. To solve these problems, we have developed a novel IoT hardware control system based on a mobile messenger. For the security, we have adopted a secure mobile messenger, Telegram, which has its own security protection. Also, it can improve the easy of the usage without any installation of specific applications. For the enhancement of the system accessibility, the proposed IoT system supports various network protocols. As a result, there are many possibility to include various functions in the system. Finally, our IoT system can analyze the collected information from sensors to provide useful information to the users. Through the experiment, we show that the proposed IoT system can perform well.
  41. 안현진;이예림;이수진;한동국 2240
    https://doi.org/10.5370/KIEE.2016.65.12.2240 PDF KSCI
    MIFARE Classic is the most popular contactless smart card, which is primarily used in the management of access control and public transport payment systems. It has several security features such as the proprietary stream cipher Crypto 1, a challenge-response mutual authentication protocol, and a random number generator. Unfortunately, multiple studies have reported structural flaws in its security features. Furthermore, various attack methods that target genuine MIFARE Classic cards or readers have been proposed to crack the card. From a practical perspective, these attacks can be partitioned according to the attacker's ability. However, this measure is insufficient to determine the optimal attack flow due to the refined random number generator. Most card-only attack methods assume a predicted or fixed random number, whereas several commercial cards use unpredictable and unfixable random numbers. In this paper, we propose optimal MIFARE Classic attack procedures with regards to the type of random number generator, as well as an adversary's ability. In addition, we show actual attack results from our portable experimental setup, which is comprised of a commercially developed attack device, a smartphone, and our own application retrieving secret data and sector key.
  42. 진태환;박혜리;정모;신기열 2251
    https://doi.org/10.5370/KIEE.2016.65.12.2251 PDF KSCI
    The use of renewable energy sources and energy storage systems is increasing due to new policies in the energy industries. However, the increase in distributed generation hinders the reliability of power systems. In order to stabilize power systems, a virtual power plant has been proposed as a novel power grid management system. The virtual power plant plays includes different distributed energy resources and energy storage systems. We define a core virtual power plant technology related to demand response and ancillary service for the cases of Korea, America, and Europe. We also suggest applications of the proposed virtual power plant to the vehicle-to-grid market for restructuring national power industries in Korea.
  43. 강태욱;김선명 2262
    https://doi.org/10.5370/KIEE.2016.65.12.2262 PDF KSCI
    In IEEE 802.11 wireless LANs, when a source node with low data rate occupies the channel resource for a long time, network performance degrades. In order to improve performance, the cooperative communication has been proposed. In the previous cooperative communication protocols, relay nodes deliver data packets only for a source node. In this paper, we propose an additional transmission scheme in which relay nodes select an additional source node based on several information and deliver data packets for the original source node and the selected additional source node. The proposed scheme improves performance and provides fairness among source nodes. Performance of the proposed scheme is investigated by simulation. Our results show that the proposed scheme outperforms the previous protocol in terms of fairness index and throughput.
  44. 이지민;박종안;안영은;오상언 2270
    https://doi.org/10.5370/KIEE.2016.65.12.2270 PDF KSCI
    In modern society, creation and distribution of multimedia contents is being actively conducted. These multimedia information have come out the enormous amount daily, the amount of data is also large enough it can't be compared with past text information. Since it has been increased for a need of the method to efficiently store multimedia information and to easily search the information, various methods associated therewith have been actively studied. In particular, image search methods for finding what you want from the video database or multiple sequential images, have attracted attention as a new field of image processing. Image retrieval method to be implemented in this paper, utilizes the attribute of corner patches based on the corner points of the object, for providing a new method of efficient and robust image search. After detecting the edge of the object within the image, the straight lines using a Hough transformation is extracted. A corner patches is formed by defining the extracted intersection of the straight line as a corner point. After configuring the feature vectors with patches rearranged, the similarity between images in the database is measured. Finally, for an accurate comparison between the proposed algorithm and existing algorithms, the recall precision rate, which has been widely used in content-based image retrieval was used to measure the performance evaluation. For the image used in the experiment, it was confirmed that the image is detected more accurately in the proposed method than the conventional image retrieval methods.