DOI QR코드

DOI QR Code

주행 사이클을 고려한 IPMSM의 효율 및 출력 밀도 개선으로 경량 전기 자동차의 주행거리 연장

Range Extension of Light-Duty Electric Vehicle Improving Efficiency and Power Density of IPMSM Considering Driving Cycle

  • Kim, Dong-Min (Dept. of Automotive Engineering, Hanyang University) ;
  • Jung, Young-Hoon (Dept. of Automotive Engineering, Hanyang University) ;
  • Lim, Myung-Seop (Dept. of Automotive Engineering, Hanyang University) ;
  • Sim, Jae-Han (Dept. of Automotive Engineering, Hanyang University) ;
  • Hon, Jung-Pyo (Dept. of Automotive Engineering, Hanyang University)
  • 투고 : 2016.10.19
  • 심사 : 2016.11.28
  • 발행 : 2016.12.01

초록

Recently, the trend of zero emissions has increased in automotive engineering because of environmental problems and regulations. Therefore, the development of battery electric vehicles (EVs), hybrid/plug-in hybrid electric vehicles (HEVs/PHEVs), and fuel cell electric vehicles (FCEVs) has been mainstreamed. In particular, for light-duty electric vehicles, improvement in electric motor performance is directly linked to driving range and driving performance. In this paper, using an improved design for the interior permanent magnet synchronous motor (IPMSM), the EV driving range for the light-duty EV was extended. In the electromagnetic design process, a 2D finite element method (FEM) was used. Furthermore, to consider mechanical stress, ANSYS Workbench was adopted. To conduct a vehicle simulation, the vehicle was modeled to include an electric motor model, energy storage model, and regenerative braking. From these results, using the advanced vehicle simulator (ADVISOR) based on MATLAB Simulink, a vehicle simulation was performed, and the effects of the improved design were described.

키워드

참고문헌

  1. Worldwide Emissions Standards: Passenger Cars and Light Duty Vehicles, DELPHI, 2015.
  2. Gereon Meyer, Jadranka Dokic, Heike Jurgens, and Sebastian Stagle, "Hybrid and Electric Vehicles: The Electric Drive Delivers," Annual Report IEA IA-HEV Implementing Agreement for Co-operation on Hybrid and Electric Vehicle Technologies and Programmes, 2015.
  3. C. C. Chan, "The State of the Art of Electric, Hybrid, and Fuel Cell Vehicles," IEEE Proc., vol. 95, pp. 704-718, 2007. https://doi.org/10.1109/JPROC.2007.892489
  4. Ennio Rossi, Carlo Villante, "A Hybrid City Car: Prototype by ENEA for Urban Mobility," IEEE Vehicular Technology Magazine, 2011.
  5. Di Pan, Kum-Kang Huh, and Thomas A. Lipo, "Efficiency Improvement and Evaluation of Floating Capacitor Open-Winding PM Motor Drive for EV Application," IEEE Energy Conversion Congress and Exposition (ECCE), 2014.
  6. Myung-Seop Lim, Seung-Hee Chai, and Jung-Pyo Hong, "Design of Saliency Based Sensorless Controlled IPMSM with Concentrated Winding for EV traction," IEEE Trans. Magn., vol. 52, No. 3, 8200504, March 2016.
  7. Sung-Jin Kim, Sang-Yong Jung, and Yong-Jae Kim, "Air-Barrier Width Prediction of Interior Permanent Magnet Motor for Electric Vehicle Considering Fatigue Failure by Centrifugal Force," Journal of Electrical Engineering & Technology, Vol. 10, pp. 952-957, 2015. https://doi.org/10.5370/JEET.2015.10.3.952
  8. Byeong-Hwa Lee, Soon-O Kwon, Tao Sun, Jung-Pyo Hong, Geun-Ho Lee, and Jin Hur, "Modeling of Core Loss Resistance for d-q equivalent Circuit Analysis of IPMSM considering Harmonic Linkage," IEEE Trans. Magn., vol. 47, pp. 1066-1069, 2011. https://doi.org/10.1109/TMAG.2010.2099647
  9. Jae-Woo Jung, Sang-Ho Lee, and Jung-Pyo Hong, "Optimum Design for Eddy Current Reduction in Permanent Magnet to Prevent Irreversible Demagnetization," Proceeding of International Conference on Electrical Machines and Systems, 2007.
  10. Rindra Ramarotafika, Abdelkader Benabou, Stephane Clenet, and Jean Claude Mipo, "Experimental Characterization of the Iron Losses Variability in Stators of Electrical Machines," IEEE Trans. Magn., vol. 48, pp. 1629-1632, 2012. https://doi.org/10.1109/TMAG.2011.2173473
  11. Ji-Young Lee, Seung-Ryul Moon, Dae-Hyun Koo, Do-Hyun Kang, Geun-Ho Lee, and Jung-Pyo Hong, "Comparative Study of Stator Core Composition in Transverse Flux Rotary Machine," Journal of Electrical Engineering & Technology, vol. 6, pp. 350-355, 2011. https://doi.org/10.5370/JEET.2011.6.3.350
  12. Byeong-Hwa Lee, Jung-Pyo Hong, and Jung-Ho Lee, "Optimum Design Criteria for Maximum Torque and Efficiency of a Line-Start Permanent-Magnet Motor Using Response Surface Methodology and Finite Element Method," IEEE Trans. Magn., vol. 48, pp. 863-866, 2012. https://doi.org/10.1109/TMAG.2011.2175207
  13. Nobuyuki Matsui, Youji Takeda, Shigeo Morimoto, and Yukio Honda, Design and Control of IPMSM, Ohmsha, Ltd, 2001.
  14. Nicola Bianchi, Thomas M. Jahns, "Design, Analysis, and Control of Interior PM Synchronous Machine," IEEE IAS Annual Meeting, 2004.
  15. Jun-Hyeok Kim, Soon-Jeong Lee, Eung-Sang Kim, Seul-Ki Kim, Chul-Hwan Kim, and Laszlo Prikler, "Modeling of Battery for EV using EMTP/ATPD raw," Journal of Electrical Engineering & Technology, vol. 9, pp. 98-105, 2014. https://doi.org/10.5370/JEET.2014.9.1.098