전기학회논문지 (The Transactions of The Korean Institute of Electrical Engineers)

  • 제65권12호
  • /
  • Pages.2189-2196
  • /
  • 2016
  • /
  • 1975-8359(pISSN)
  • /
  • 2287-4364(eISSN)
대한전기학회 (The Korean Institute of Electrical Engineers)
권호 표지
DOI QR코드

DOI QR Code

전기자동차용 유도전동기를 위한 유한제어요소 모델예측 토크제어

Finite Control Set Model Predictive Control with Pulse Width Modulation for Torque Control of EV Induction Motors

  • Park, Hyo-Sung (Dept. of Electrical and Information Engineering, Seoul National University of Science and Technology) ;
  • Koh, Byung-Kwon (Dept. of Electrical and Information Engineering, Seoul National University of Science and Technology) ;
  • Lee, Young-il (Dept. of Electrical and Information Engineering, Seoul National University of Science and Technology)
  • 투고 : 2016.10.19
  • 심사 : 2016.11.28
  • 발행 : 2016.12.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

This paper proposes a new finite control set-model predictive control (FCS-MPC) method for induction motors. In the method, the reference state that satisfies the given torque and rotor flux requirements is derived. Cost indices for the FCS-MPC are defined using the state tracking error, and a linear matrix inequality is formulated to obtain a proper weighting matrix for the state tracking error. The on-line procedure of the proposed FCS-MPC comprises of two steps: select the output voltage vector of the two level inverter minimizing the cost index and compute the optimal modulation factor of the minimizing output voltage vector in order to reduce the state tracking error and torque ripple. The steady state tracking error is removed by using an integrator to adjust the reference state. The simulation and experimental results demonstrated that the proposed FCS-MPC shows good torque, rotor flux control performances at different rotating speeds.

키워드

참고문헌

  1. I. Takahashi and T. Noguchi, A new quick-response and highefficiency control strategy of an induction motor, IEEE Trans. Ind. Applicat., vol. 22, pp. 820827, Sept./Oct. 1986.
  2. J.-K. Kang and S.-K. Sul, New direct torque control of induction motor for minimum torque ripple and constant switching frequency, IEEE Trans. Ind. Applicat., vol. 35, pp. 10761082, Sept./Oct. 1999.
  3. Z. Zhang, R. Tang, B. Bai, and D. Xie, "Novel direct torque control based on space vector modulation with adaptive stator flux observer for induction motors," IEEE Trans. on Magnetics, Vol. 46, No. 8, pp. 3133-3134, Aug. 2010. https://doi.org/10.1109/TMAG.2010.2051142
  4. J. Beerten, J. Verveckken, and J. Driesen, "Predictive direct torque control for flux and torque ripple reduction," IEEE Trans. Ind. Electron., vol. 57, no. 1, pp. 404-412, Jan. 2010. https://doi.org/10.1109/TIE.2009.2033487
  5. H. Zhu, X. Xiao, and Y. Li, "Torque ripple reduction of the torque predictive control scheme for permanentmagnet synchronous motors," IEEE Trans. Ind. Electron., vol. 59, no. 2, pp. 871-877, Feb. 2012. https://doi.org/10.1109/TIE.2011.2157278
  6. K.-K. Shyu, J.-K. Lin, V.-T. Pham, M.-J. Yang, and T.-W. Wang, Global minimum torque ripple design for direct torque control of induction motor drives, IEEE Trans. Ind. Electron., vol. 57, no. 9, pp. 3148-3156, Sep. 2010. https://doi.org/10.1109/TIE.2009.2038401
  7. Y. Li, C. Wang, and H. Hu, "Predictive control of torque and flux of induction motor drives," in Proc. PEDS, pp. 67-71, 2005.
  8. N.T West, and R.D Lorenz, Digital Implementation of Stator and Rotor Flux-Linkage Observers and a Stator-Current Observer for Deadbeat Direct Torque Control of Induction Machines IEEE Trans. Ind. Applications, vol. 45, no. 2, pp. 729-736, mar/apr 2009. https://doi.org/10.1109/TIA.2009.2013567
  9. B. Wang, W. Guo, Y. Wang, and Z. Wang, A Deadbeat Direct Torque Control of Surface Permanent Magnet Synchronous Machines Using Space Vector Modulation, International Conference on Electrical Machines and systems, pp. 1086-1088, Oct. 2008.
  10. H. Miranda, P. Cortes, J. Yuz, and J. Rodriguez, "Predictive torque control of induction machines based on state-space models," Industrial Electronics, IEEE Transactions on, vol. 56, no. 6, pp. 1916-1924, june 2009. https://doi.org/10.1109/TIE.2009.2014904
  11. Y. Zhang, and H. Yang, Model Predictive Torque Control of Induction Motor Drives With Optimal Duty Cycle Control, IEEE Transactions on Power Electronics, vol. 29, no. 12, pp. 6593-6603, 2013. https://doi.org/10.1109/TPEL.2014.2302838
  12. S. K Kim, J. S Kim, and Y. L Lee, Model Predictive Control(MPC) based direct torque control(DTC) of Permanent Magnet Synchronous Motors(PMSMs), IEEE International Symposium on, Industrial Electronics, pp. 1-6, May. 2013.
  13. M. Nemec, D. Nedeljkovic, and V. Ambrozic, "Predictive torque control of induction machines using immediate flux control", IEEE Trans. Ind. Electonics, vol. 54, no. 4, pp. 2009-2017, Aug. 2007. https://doi.org/10.1109/TIE.2007.895133
  14. Patrick L. Jasen, and Robert D. Lorenz, A Physically Insightful Approach to the Design and Accuracy Assessment of Flux Observers for Field Oriented Induction Machine Drives, Industry Applications, IEEE Transactions on, vol. 30, no. 1 pp. 101-110, JAN/FEB. 1994. https://doi.org/10.1109/28.273627
  15. P. Crotes, J. Rodriguez, C. silva, and A. Flores, "Delay compensation in model predictive current control of a three-phase inverter", IEEE Trans. Ind. Electronics, vol. 59, no. 2, pp. 1323-1325, 2012. https://doi.org/10.1109/TIE.2011.2157284
  16. J. Rodriguez, R. M. Kennel, J. R. Espinoza, M. Trincado, A. Silva, and C. A. Rojas, "High-performance control strategies for electrical drives: An experimental assessment", IEEE Trans. Ind. Electronics, vol. 59, no. 2, pp. 812-820, 2012. 1991. https://doi.org/10.1109/TIE.2011.2158778