• 제목/요약/키워드: Delay locked loop (DLL)

검색결과 72건 처리시간 0.022초

Harmonic Locking을 제거하기 위한 아날로그 Multi- phase DLL 설계 (An Analog Multi-phase DLL for Harmonic Lock Free)

  • 문장원;곽계달
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 2001년도 하계종합학술대회 논문집(2)
    • /
    • pp.281-284
    • /
    • 2001
  • This paper describes an analog multi-phase delay-locked loop (DLL) to solve the harmonic lock problem using current-starved inverter and shunt-capacitor delay cell. The DLL can be used not only as an internal clock buffer of microprocessors and memory It's but also as a multi-phase clock generator for gigabit serial interfaces. The proposed circuit was simulated in a 0.25${\mu}{\textrm}{m}$ CMOS technology to solve harmonic lock problem and to realize fast lock-on time and low-jitter we verified time interval less than 40 ps as the simulation results.

  • PDF

A DLL Based Clock Synthesizer with Locking Status Indicator A DLL Based Clock Synthesizer with Locking Status Indicator

  • Ryu Young-Soo;Choi Young-Shig
    • Journal of information and communication convergence engineering
    • /
    • 제3권3호
    • /
    • pp.142-145
    • /
    • 2005
  • In this paper, a new programmable DLL (delay locked loop) based clock synthesizer is proposed. DLL has several inherent advantages, such as no phase accumulation error, fast locking and easy integration of the loop filter. This paper proposes a new programmable DLL that includes a PFD(phase frequency detector), a LSI(lock status indicator), and a VCDL(voltage controlled delay line) to generate multiple clocks. It can generate clocks from 3 to 9 times of input clock with $2{\mu}s$ locking time. The proposed DLL operating in the frequency range of 300MHZ-900MHz is verified by the HSPICE simulation with a $0.35{\mu}m$ CMOS process.

가변 클록 발생을 위한 DLL 주파수 합성기 (A DLL-Based Frequency Synthesizer for Generation of Various Clocks)

  • 이지현;송윤귀;최영식;최혁환;류지구
    • 한국정보통신학회논문지
    • /
    • 제8권6호
    • /
    • pp.1153-1157
    • /
    • 2004
  • 본 논문에서는 DLL(delay locked loop)에서의 프로그램 가능한 새로운 주파수 합성기를 제안하고자 한다. 일반적으로 주파수를 합성하기 위해서 PLL(phase locked loop)이 많이 이용되어 왔으며, locking 시간이 빠른 DLL 역시 주파수 합성에 이용되고 있다. 하지만 DLL의 경우 주파수를 합성하기 위해서는 따로 주파수를 체배하는 블록이 필요하다. 기존의 DLL에서 사용된 주파수 체배기는 주파수를 체배하는 배수가 한번 정해지면 바꿀 수 없다는 단점이 있다. 그러나 본 논문에서 제안하는 체배기는 입력주파수에 대해서 6배에서 10배까지 선형적으로 주파수를 체배할 수 있다. 제안된 DLL의 동작 주파수 범위는 600MHz에서 1GHz까지 이다. $0.35-\mu\textrm{m}$ CMOS 공정을 이용해 HSPICE simulation 하여 동작을 검증하였다.

3단 구성의 디지털 DLL 회로 (All Digital DLL with Three Phase Tuning Stages)

  • 박철우;강진구
    • 전기전자학회논문지
    • /
    • 제6권1호
    • /
    • pp.21-29
    • /
    • 2002
  • 본 논문에서는 전부 디지털 회로로 구성된 고 해상도의 DLL(Delay Locked Loop)를 제안하였다. 제안된 회로는 위상 검출기, 지연 선택 블록, 그리고 각각의 지연 체인을 가지는 Coarse, Fine 그리고 Ultra Fine 위상조정 블록의 삼 단의 형식으로 되어 있다. 첫 번째 단은 Ultra Fine 위상조정블록으로 고 해상도를 얻기 위하여 Vernier Delay Line을 사용하였다. 두 번째와 세 번째 단은 Coarse와 Fine 위상조정블록으로 각각의 단위 지연 체인을 이루는 단위 지연 소자의 해상도 만큼의 위상 제어를 하게 되며, 두 단은 상당히 비슷한 구조를 이루고 있다. 회로는 HSPICE를 이용하여 공급 전압이 3.3V인 $0.35{\mu}m$ CMOS 공정으로 시뮬레이션 되었다. 시뮬레이션 결과 회로의 해상도를 약 10ps로 높일 수 있었으며, 동작 범위는 250MHz에서 800MHz 이다.

  • PDF

2-step DPC를 이용한 이중루프 DLL기반의 광대역 클록 데이터 복원회로 설계 (Design of Wide - range Clock and Data Recovery Circuit based Dual-loop DLL using 2-step DPC)

  • 정기상;김강직;고귀한;조성익
    • 전기학회논문지
    • /
    • 제61권2호
    • /
    • pp.324-328
    • /
    • 2012
  • A recovered jitter of CDR(Clock and Data Recovery) Circuit based on Dual-loop DLL(Delay Locked Loop) for data recovery in high speed serial data communication is changed by depending on the input data and reference clock frequency. In this paper, 2-step DPC which has constant jitter performance for wide-range input frequency is proposed. The designed prototype 2-step CDR using proposed 2-step DPC has operation frequency between 200Mbps and 4Gbps. Average delay step of 2-step DPC is 10ps. Designed CDR circuit was tested with 0.18um CMOS process.

0.11-2.5 GHz All-digital DLL for Mobile Memory Interface with Phase Sampling Window Adaptation to Reduce Jitter Accumulation

  • Chae, Joo-Hyung;Kim, Mino;Hong, Gi-Moon;Park, Jihwan;Ko, Hyeongjun;Shin, Woo-Yeol;Chi, Hankyu;Jeong, Deog-Kyoon;Kim, Suhwan
    • JSTS:Journal of Semiconductor Technology and Science
    • /
    • 제17권3호
    • /
    • pp.411-424
    • /
    • 2017
  • An all-digital delay-locked loop (DLL) for a mobile memory interface, which runs at 0.11-2.5 GHz with a phase-shift capability of $180^{\circ}$, has two internal DLLs: a global DLL which uses a time-to-digital converter to assist fast locking, and shuts down after locking to save power; and a local DLL which uses a phase detector with an adaptive phase sampling window (WPD) to reduce jitter accumulation. The WPD in the local DLL adjusts the width of its sampling window adaptively to control the loop bandwidth, thus reducing jitter induced by UP/DN dithering, input clock jitter, and supply/ground noise. Implemented in a 65 nm CMOS process, the DLL operates over 0.11-2.5 GHz. It locks within 6 clock cycles at 0.11 GHz, and within 17 clock cycles at 2.5 GHz. At 2.5 GHz, the integrated jitter is $954fs_{rms}$, and the long-term jitter is $2.33ps_{rms}/23.10ps_{pp}$. The ratio of the RMS jitter at the output to that at the input is about 1.17 at 2.5 GHz, when the sampling window of the WPD is being adjusted adaptively. The DLL consumes 1.77 mW/GHz and occupies $0.075mm^2$.

패키지후 프로그램을 이용 스큐 수정이 가능한 광범위한 잠금 범위를 가지고 있는 이중 연산 DLL 회로 (A Wide - Range Dual-Loop DLL with Programmable Skew - Calibration Circuitry for Post Package)

  • 최성일;문규;위재경
    • 대한전자공학회논문지SD
    • /
    • 제40권6호
    • /
    • pp.408-420
    • /
    • 2003
  • 이 논문에서는 1) 넓은 잠금 범위를 위한 이중 루프 동작과 2) 차세대 패키지 스큐 개선에 대한 전압 발생기와 안티퓨즈 회로를 사용한 프로그래머블 레프리카 딜레이, 두 가지 이점을 갖는 Delay Lock Loop(DLL)을 기술하였다. 이중 루프 동작은 차동 내부 루프 중 하나를 선택하기 위해 외부 클럭과 내부 클럭 사이의 초기 시간차에 대한 정보를 사용한다. 이를 이용하여 더 낮은 주파수로 DLL의 잠금 범위를 증가시킨다. 덧붙여서, 전압발생기와 안티퓨즈 회로를 사용한 프로그래머블 레프리카 딜레이의 결합은 패키지 공정 후에 온-오프 칩 변화로부터 발생하는 외부 클럭과 내부 클럭 사이에 스큐 제거를 해준다. 제안된 DLL은 0.16um 공정으로 제조되었고, 2.3v의 전원 공급과 42㎒ - 400㎒의 넓은 범위에서 동작한다. 측정된 결과는 43psec p-p 지터와 400㎒에서 52㎽를 소비하는 4.71psec 실효치(rms)지터를 보여준다.

A Low-Jitter DLL-Based Clock Generator with Two Negative Feedback Loops

  • Choi, Young-Shig;Park, Jong-Yoon
    • JSTS:Journal of Semiconductor Technology and Science
    • /
    • 제14권4호
    • /
    • pp.457-462
    • /
    • 2014
  • This letter proposes a low-jitter DLL-based clock generator with two negative feedback loops. The main negative feedback loops suppress the jitter of DLL. The additional negative feedback loops suppress the delay-time variance of each delay stages. Both two negative feedback loops in a DLL results in suppressing the jitter of clock signal further. Measurement results of the DLL-based clock generator with two negative feedback loops fabricated in a one-poly six-metal $0.18{\mu}m$ CMOS process show 5.127-ps rms jitter and 47.6-ps peak-to-peak jitter at 1 GHz.

Vernier 방법을 이용한 Low-jitter DLL 구현 (Design of Low-jilter DLL using Vernier Method)

  • 서승영;장일권;곽계달
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 2000년도 추계종합학술대회 논문집(2)
    • /
    • pp.83-86
    • /
    • 2000
  • This paper describes a delay-locked loop(DLL_) with low-jitter using Vernier Method. This DLL can be used to synchronize the internal clock to the external clock with very short time interval and fast lock-on. The proposed circuit was simulated in a 0.25 $\mu\textrm{m}$ CMOS technology to realize low-jitter. We verified 50-ps of time interval within 5 clock cycles of the clock as the simulation results.

  • PDF

입력 위상 잡음 억제 및 체배 주파수의 듀티 사이클 보정을 위한 VCO/VCDL 혼용 기반의 다중위상 동기회로 (A Multiphase DLL Based on a Mixed VCO/VCDL for Input Phase Noise Suppression and Duty-Cycle Correction of Multiple Frequencies)

  • 하종찬;위재경;이필수;정원영;송인채
    • 대한전자공학회논문지SD
    • /
    • 제47권11호
    • /
    • pp.13-22
    • /
    • 2010
  • 본 논문은 입력 클록의 고주파 위상 잡음 억제와 정확한 듀티 사이클을 갖는 체배 주파수 생성을 위하여 Voltage-Controlled Oscillator(VCO)/Voltage-Controlled Delay Line(VCDL) 혼용기반의 다중 위상 Delay-Locked Loop(DLL)를 제시한다. 이 제안된 구조에서, 다중 위상 DLL은 혼용 VCO/VCDL의 입력 단에 nMOS 소스 결합 회로 기반의 이중 입력 차동 버퍼를 사용한다. 이것은 고주파 입력 위상 잡음 억제를 위하여 전 대역 통과 필터 특성을 갖는 기존 DLL의 입/출력 위상 전달을 저주파 통과 필터 특성을 갖는 PLL의 입/출력 위상 전달로 쉽게 변환시킬 수 있다. 또한, 제안된 DLL은 추가적인 보정 제어 루프 없이 단지 듀티 사이클 보정 회로와 위상 추적 루프를 이용하여 체배 주파수의 듀티 사이클 에러를 보정할 수 있다. $0.18{\mu}m$ CMOS 공정을 이용한 시뮬레이션 결과에서, 제안된 DLL의 출력 위상 잡음은 800MHz의 입력 위상 잡음을 갖는 1GHz 입력 클록에 대하여 -13dB 이하로 개선된다. 또한, 40%~60%의 듀티 사이클 에러를 갖는 1GHz 동작 주파수에서, 체배 주파수의 듀티 사이클 에러는 2GHz 체배 주파수에서 $50{\pm}1%$이하로 보정된다.