• 한국통신학회논문지
• /
• 제32권11C호
• /
• pp.1102-1110
• /
• 2007

본 논문에서는 기존의 정진폭 다중 부호 이진 직교 (CAMB: Constant-Amplitude Multi-code Biorthogonal) 변조 이론을 적용한 변복조기를 프로그래밍 가능한 게이트 배열 (FPGA: Field-Programmable Gate Array)을 사용하여 설계하고 시스템 온 칩 (SoC: System on Chip)으로 구현하였다. 이 변복조기는 FPGA을 이용하여 타겟팅 한 후 보드실험을 통해 설계에 대한 충분한 검증을 거쳐 주문형 반도체 (ASIC: Application Specific Integrated Circuit) 칩으로 제작되었다. 이러한 12Mbps급 모뎀의 SoC를 위하여 ARM (Advanced RISC Machine)7TDMI를 사용하였으며 64K바이트 정적 램 (SRAM: Static Random Access Memory)을 내장하였다. 16-비트 PCMCIA (Personal Computer Memory Card International Association), USB (Universal Serial Bus) 1.1, 16C550 Compatible UART (Universal Asynchronous Receiver/Transmitter) 등 다양한 통신 인터페이스를 지원할 뿐 아니라 ADC (Analog to Digital Converter)/DAC (Digital to Analog Converter)를 포함하고 있어 실제 현장에서 쉽게 활용될 수 있을 것으로 기대된다.

• 한국통신학회논문지
• /
• 제33권11C호
• /
• pp.963-969
• /
• 2008

본 논문에서는 무선통신시스템의 수신단에 적용될 수 있는 6비트 100MHz 플래쉬 A/D 변환기를 설계하였다. 제안하는 플래쉬 A/D 변환기는 해상도가 1비트씩 증가함에 따라 2배수로 증가하는 S-R 래치 회로를 단순화하여 집적화 하였다. 기존 NAND 기반의 S-R 래치 회로에 사용되던 8개의 MOS 트랜지스터 숫자를 6개로 줄였으며, 비교단의 동적 소비전력을 최대 12.5%까지 감소되도록 설계하였다. 설계된 A/D 변환기는 $0.18{\mu}m$ CMOS n-well 1-poly 6-metal 공정을 사용하여 제작되었고, 전원 전압 1.8V, 샘플링 주파수 100MHz에서의 전력소모는 282mW이다. 입력 주파수 1.6MHz, 30MHz에서의 SFDR은 각각 35.027dBc, 31.253dBc이며, 4.8비트, 4.2비트의 ENOB를 나타내었다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 합동 추계학술대회 논문집 정보 및 제어부문
• /
• pp.609-612
• /
• 2002

In this paper, a 12-bit 100-MHz CMOS current steering digital-to-analog converter is designed. In the D/A converter, a driver circuit using a dynamic latch is implemented to obtain low glitch and thermometer decoder is used for low DNL errors, guaranteed monotonicity, reduced stitching noise. And a threshold voltage-compensated current source. The D/A converter is designed with 0.35-$\mu m$ CMOS technology at 3.3 V power supply and simulated with HSPICE. The maximum power dissipation of the designed DAC is 143 mW.

• Journal of Electrical Engineering and Technology
• /
• 제9권5호
• /
• pp.1551-1561
• /
• 2014

Design, Simulation and experimental analysis of closed loop time domain based Discrete PWM buck-boost converter are described. To improve the transient response and dynamic stability of the proposed converter, Discrete PID controller is the most preferable one. Discrete controller does not require any precise analytical model of the system to be controlled. The control system of the converter is designed using digital PWM technique. The proposed controller improves the dynamic performance of the buck-boost converter by achieving a robust output voltage against load disturbances, input voltage variations and changes in circuit components. The converter is designed through simulation using MATLAB/Simulink and performance parameters are also measured. The discrete controller is implemented, and design goal is achieved and the same is verified against theoretical calculation using LabVIEW.

• IEIE Transactions on Smart Processing and Computing
• /
• 제4권3호
• /
• pp.189-193
• /
• 2015

This paper provides the design techniques of a successive approximation register (SAR) type 12b analog-to-digital converter (ADC) for distributed maximum power point tracking (DMPPT) control in a photovoltaic system. Both a top-plate sampling technique and a $V_{CM}$-based switching technique are applied to the 12b capacitor digital-to-analog converter (CDAC). With these techniques, we can implement a 12b SAR ADC with a 10b capacitor array digital-to-analog converter (DAC). To enhance the accuracy of the ADC, a single-to-differential converted DAC is exploited with the dual sampling technique during top-plate sampling. Simulation results show that the proposed ADC can achieve a signal-to-noise plus distortion ratio (SNDR) of 70.8dB, a spurious free dynamic range (SFDR) of 83.3dB and an effective number of bits (ENOB) of 11.5b with bipolar CMOS LDMOD (BCDMOS) $0.35{\mu}m$ technology. Total power consumption is 115uW under a supply voltage of 3.3V at a sampling frequency of 1.25MHz. And the figure of merit (FoM) is 32.68fJ/conversion-step.

• IEIE Transactions on Smart Processing and Computing
• /
• 제4권3호
• /
• pp.183-188
• /
• 2015

A 10-bit 10MS/s low power consumption successive approximation register (SAR) analog-to-digital converter (ADC) using a straightforward capacitive digital-to-analog converter (DAC) is presented in this paper. In the proposed capacitive DAC, switching is always straightforward, and its value is half of the peak-to-peak voltage in each step. Also the most significant bit (MSB) is decided without any switching power consumption. The application of the straightforward switching causes lower power consumption in the structure. The input is sampled at the bottom plate of the capacitor digital-to-analog converter (CDAC) as it provides better linearity and a higher effective number of bits. The comparator applies adaptive power control, which reduces the overall power consumption. The differential prototype SAR ADC was implemented with $0.18{\mu}m$ complementary metal-oxide semiconductor (CMOS) technology and achieves an effective number of bits (ENOB) of 9.49 at a sampling frequency of 10MS/s. The structure consumes 0.522mW from a 1.8V supply. Signal to noise-plus-distortion ratio (SNDR) and spurious free dynamic range (SFDR) are 59.5 dB and 67.1 dB and the figure of merit (FOM) is 95 fJ/conversion-step.

• 전기전자학회논문지
• /
• 제22권2호
• /
• pp.514-517
• /
• 2018

센서 시스템의 아날로그-디지털 변환기(ADC: analog-to-digital converter)에서는 높은 해상도, 낮은 전력 소모, 높은 신호 대역폭이 요구된다. 시그마-델타 ADC는 높은 차수 구조와 높은 오버샘플링 비를 통해 고해상도를 얻을 수 있으나 전력 소모가 높고 신호 대역폭이 낮다. 연속 근사 레지스터(SAR: successive-approximation-register) ADC의 경우 저전력 동작이 가능하나 공정상 부정합으로 인해 해상도에 한계가 있다. 본 논문에서는 이러한 단점들을 극복하기 위한 ADC 구조 개선에 대해 살펴본다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 하계종합학술대회 논문집(2)
• /
• pp.253-256
• /
• 2001

This paper introduces the design of high-speed analog- to-digital converter for high-definition TV, camcorders, portable equipments and implemented in a 0.65${\mu}{\textrm}{m}$ CMOS technology. Key circuits developed for low power and high speed A/D converter are a dynamic comparator that consumes no static power, a source follower buffered op amp that achives wide bandwidth using large input devices. The converter achieves low power dissipation of 40-mW at 3.3-V power supply. Measured performance includes 0.53 LSB of INL and 0.48 LSB of DNL while sampling at 60MHz.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 학술회의 논문집 정보 및 제어부문 B
• /
• pp.361-364
• /
• 2003

In this paper, a high-resolution multibit sigma-delta modulator implemented in a.0.35-um CMOS technology is introduced. This modulator consists of two switched capacitor integrators, 3-bits A/D converter, and 3-bits D/A converter For the verification of the internal function blocks, HSPICE simulator is used. This circuit is normally operated at 130 MHz clock and the total power dissapation is 70 mW.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제16권3호
• /
• pp.300-311
• /
• 2016

The analog-to-digital-converter-based (ADC-based) backplane receivers that consist of a front-end ADC followed by a digital equalizer are gaining more popularity in recent years, as they support more sophisticated equalization required for high data rates, scale better with fabrication technology, and are more immune to PVT variations. Unfortunately, designing an ADC-based receiver that meets tight power and performance budgets of high-speed backplane link systems is non-trivial as both front-end ADC and digital equalizer can be power consuming and complex when running at high speed. This paper reviews the state of art designs for the front-end ADC and digital equalizers to suggest implementation choices that can achieve high speed while maintaining low power consumption and complexity. Design-space exploration using system-level models of the ADC-based receiver allows through analysis on the impact of design parameters, providing useful information in optimizing the power and performance of the receiver at the early stage of design. The system-level simulation results with newer device parameters reveal that, although the power consumption of the ADC-based receiver may not comparable to the receivers with analog equalizers yet, they will become more attractive as the fabrication technology continues to scale as power consumption of digital equalizer scales well with process.