권호 표지

산업경영시스템학회지 (Journal of Korean Society of Industrial and Systems Engineering) (Journal of Korean Society of Industrial and Systems Engineering)

한국산업경영시스템학회 (Society of Korea Industrial and System Engineering)

  • 계간
  • /
  • 2005-0461(pISSN)
  • /
  • 2287-7975(eISSN)

과학기술표준분류

  • 경제/경영 ＞ 경영전략/윤리

Aim & Scope

As the flagship journal of the Society of Korea Industrial and Systems Engineering, Journal of Society of Korea Industrial and Systems Engineering launched in 1978 publishes original high-quality papers on a wide range of topics of interest to industrial engineers who want to remain current with the state-of-the-art technologies. It aims to foster the engineering and business administration community by publishing papers with a strong methodological focus motivated by real problems that impact engineering practice and research. It is composed of various focus issues: design and manufacturing, operations engineering and analysis, quality and reliability engineering, intelligent information systems, scheduling and logistics and business administration. The journal published quarterly in March, June, September and December each year. The official title of the journal is 'Journal of Society of Korea Industrial and Systems Engineering' and the abbreviated title is 'J. Soc. Korea Ind. Syst. Eng.'. All submitted manuscripts are peer-reviewed by three reviewers. The text may be written in Korean or English. The abstract, acknowledgement, and references should be written in English. Some, or all, of the articles in this journal are indexed in Korea Citation Index (KCI). Manuscripts should be sent to the editorial office by the website, 'http://ksie.ne.kr' that is the URL address of the journal where full text is available. This journal was supported by the Korean Federation of Science and Technology Societies(KOFST) Grant funded by the Korean Government.

http://ksie.or.kr/run/thesis/thesis.php?bid=thesis KSCI KCI

제19권39호

  1. Lee, Kyung Huy;Kim, Byoung Kug 1
    PDF
    본 연구에서는 공정계획과 일정계획을 순차적으로 수행하는 기존의 방법과는 달리, 공정계획의 선정과 일정계획의 동시적 접근을 통하여 생산시스템의 효율을 향상시키기 위한 통합방법론을 제시하고자 한다. 공정계획과 일정계획기의 순차적 접근방법에서는 공정계획과 일정계획이 각각 지역적 판단근거(local criteria)에 의해 순차적으로 선정되어 생산 시스템의 전역적 판단근거(global criteria)와 상충(conflicts)되는 경우가 자주 발생하여 시스템의 폭주(congestion)나 새 계획 등의 원인이 되고 있다. 이와 같은 문제점들을 극복하기 위해 본 연구에서는 통합적 접근을 통해 전역적 판단근거에 의한 공정계획과 일정계획의 동시접근방법을 제시하고 한다.
  2. 지영근;강맹규 9
    PDF
    Many algorithms have been developed for optimizing the asymmectric traveling salesman problem known as a representative NP-Complete problem. The most efficient ones of them are branch and bound algorithms based on the subtour elimination approach. To increase efficiency of the branch and bound algorithm. number of decision nodes should be decreased. For this the minimum bound that is more close at the optimal solution should be found or an effective bounding strategy should be used. If the optimal solution has been known, we may apply it usefully to branching. Because a good feasible solution should be found as soon as possible and have similar features of the optimal solution. By the way, the upper bound solution in branch and bound algorithm is most close at the optimal solution. Therefore, the upper bound solution can be used instead of the optimal solution and information of which can be applied to new branching criteria. As mentioned above, this paper will propose an effective branching rule using the information of the upper bound solution in the branch and bound algorithm. And superiority of the new branching rule will be shown by comparing with Bellmore-Malone's one and carpaneto-Toth's one that were already proposed.
  3. 나윤균 19
    PDF
    A solution procedure to minimize the number of storage carousels has been developed under the carousel throughput rate and total storage capacity requirements. The number of carousels can be reduced by increasing the throughput rate of carousels which depends upon the size of carousels, the storage item allocation to carousels, and the item position assignments in each carousel. Since the problem is very complicated and hard to solve optimally, the following solution procedure to solve the problem hierarchically is proposed: With a given number of carousels, the storage items are allocated to carousels so that the slowest average transaction time among carousels may be minimized, and then the position of each item is assigned in the allocated carousel so that the throughput of the carousel can be maximized.
  4. Leem, Choon-Woo;Kim, Young-Il;Kim, Wong-Joong 27
    PDF
    The objective of this paper is to outline an integrated cellular manufacturing system (ICMS) which integrates process planning and scheduling in the cellular manufacturing environment. It combines design systems with manufacturing systems in batch production. Furthermore, it is developed to overcome the difficulties that exist in the current manufacturing practices.
  5. 고종식;허원배 37
    PDF
    The purpose of this study is to increase the economical efficiency and the efficiency of MIS user's attitudes. It hypothesized that an attitudes of users are different from an environmental variables and demographic variables of an organization. So, it selected attitude variables as moderating variables. The sample in this study is the management staff of financial industries only, and the data are selected by field study using a questionnaire. The hypotheses adopted were analyzed statistically by t-test and ANOVA etc.
  6. 윤석환;민준영;신용백 47
    PDF
    We propose a parallel neural network model in which patterns are clustered and patterns in a cluster are studied in a parallel neural network. The learning algorithm used in this paper is based on LVQ algorithm of Kohonen(1990) for clustering and ADALINE(Adaptive Linear Neuron) network of Widrow and Hoff(1990) for parallel learning. The proposed algorithm consists of two parts. First, N patterns to be learned are categorized into C clusters by LVQ clustering algorithm. Second, C patterns that was selected from each cluster of C are learned as input pattern of ADALINE(Adaptive Linear Neuron). Data used in this paper consists of 250 patterns of ASCII characters normalized into $8\times16$ and 1124. The proposed algorithm consists of two parts. First, N patterns to be learned are categorized into C clusters by LVQ clustering algorithm. Second, C patterns that was selected from each cluster of C are learned as input pattern of ADALINE(Adaptive Linear Neuron). Data used in this paper consists 250 patterns of ASCII characters normalized into $8\times16$ and 1124 samples acquired from signals generated from 9 car models that passed Inductive Loop Detector(ILD) at 10 points. In ASCII character experiment, 191(179) out of 250 patterns are recognized with 3%(5%) noise and with 1124 car model data. 807 car models were recognized showing 71.8% recognition ratio. This result is 10.2% improvement over backpropagation algorithm.
  7. 노인규;최형호 63
    PDF
    With the success of flexible manufacturing systems (FMSs), flexible assembly systems (FASs) have been developed to automate factories further. As in a cellular FMS, a cellular FAS is considered as the most flexible and feasible assembly system configuration Because of the differences between manufacturing and assembly operation, the logic of cell formation and cell layout between a FMS and a FAS is not the same. Since the time for assembly operation is usually relatively short, the transfer time is thus very crucial for the performance of assembly systems. Therefore in assembly systems it is important to reduce the transfer time by sequencing operations efficiently and arranging machines like the sequences. The network-type layout is not only feasible for the machine arrangement based on operation sequences, but it has also layout flexibility. Therefore it is a reasonable layout configuration for cellular FASs. This paper presents a method for the cell layout based on the network-type layout in a cellular FAS design.
  8. 윤연근;남현우;이상완 75
    PDF
    Fuzzy approaches used to solve MONLP(Multiobjective Nonlinear Programming Problem) are based on the max-min method of fuzzy sets theory However, since the min operator noncompensatory, these approaches can not guarentee an efficient solution to the problem. In this paper, we presents an algorithm for finding the aggregation operator to find efficient solution. In particular, our presented algorithm is guarentee an efficient solution. On the basis of proposed algorithm, an illustrative numerical example is presented.
  9. 정현석;박동준 81
    PDF
    As international commerce pattern changes toward the system of developed countries market competition, developing countries experience difficulties in international commerce market. Developed countries request their trading counterparts to obtain environment restriction. We also endure the environmental pollution due to industrialization. These environmental problems force Western Europe countries to install Environment Management System. This article presents description of development processes of ISO 14000 draft, compares ISO 9000 with 7750 requirements, and describes the common points and differences between ISO 9000 and 14000 draft.
  10. 김재중;김원중;조남호 89
    PDF
    This paper is concerned with cost analysis model in free -replacement policy under the periodic maintenance policy The free-replacement policy with minimal repairable item is considered as follows; in a manufacturer's view point operating unit is periodically replaced, if a failure occurs between minimal repair and periodic maintenance time, unit is remained in a failure condition. Also unit undergoes minimal repair at failures in minimal-repair interval. Then total expected cost per unit time is calculated according to maintenance period Tin a viewpoint of consumer's. The expected costs are included repair cost and usage cost: operating, fixed, minimal repair and loss cost. Numerical example is shown in which failure time of item has beta distribution.
  11. 이상도 99
    PDF
    The production activity by human is accompanied by various accidents, resulting in human and property loss. If information on these industrial accident can be collected, organized and analyzed for a period of time and be used in the decision-making process for the purpose of preventing industrial accident, we will be able to get rid of industrial accident and prevent human and property loss and creat a pleasant industrial atmosphere. In order to achieve this goal, the collected information should be accurate, and trusted in the work place or government agency the information is being utilized. This research analyzed the problem in our nation's industrial accident statistics and estimated the number of accidents that are occurring and suggested improvement measures so that the industrial accident statistics can be calculated accurately.
  12. 신용하 117
    PDF
    Plant is production unit which consists of hardware for manufacturing like machinery, equipments and software for its installation like design, construction, supervision, engineering, know-how and trial operation. In the view of this, plant industry can be defined as an aggregation of manufacturers and sellers of plant. In this study, I would like to present the direction of cooperation for mutual benefit of Korea-Japan by understanding international competitive power of both countries' plant industry, which is not only growing as a national strategic industry, but also occupying the most important part in international economic cooperation.
  13. 이동형;이재훈 129
    PDF
    The early diagnosis has an very important role in curing dementia. But there was not the effective method to diagnose it until now. In this paper we analyzed the EEG of Alzheimer's disease patients and normal groups by nonlinear methods. In the analysis we calculated the correlation dimensions $D_2$ and the largest Lyapunov exponent $L_1$. We found that patients with Alzheimer's disease have significantly lower $D_2$ and TEX>$L_1$ than normal groups. It means that brains injured by Alzheimer's disease have electrophysiological inactive elements and have decreased chaotic behaviour. We propose the nonlinear analysis of the EEG as a useful tool for the early diagnosis of Alzheimer's disease.
  14. 유인선 143
    PDF
    Manufacturing industry is on the verge of a major paradigm shift. This shift will take us away from mass production, way beyond lean manufacturing into a world of new intelligent and agile manufacturing. We spent most of our time during the 1980s copying the Japanese. This paper studys reengineering methodologies to build up low-cost manufacturing systems efficiently in Korean companies
  15. 황우상;부진후;이동춘 155
    PDF
    It is a common tool to use alphanumeric displays on CRT for documentation, search, and communication. So, it is very important to design ergonomic displays for enhancing user performance. This paper concerns with a method of quantifing the four VDT design parameters such as total density, local density, grouping and layout complexity. A case study to demonstrate the pocedure of quantifing parameters and a comparative analysis between the ready made and the newly designed displays are provided in this paper. Concludingly, ergonomic displays which were designed in accordance with the scientific procedure were much more better than the ready made exampled displays in both of processing time and error rate.
  16. 김성희;하정진 163
    PDF
    Several formerly independent trends including the increasing rate of technological change, the demand for greater efficiency and productivity in R&D and innovation. The purpose of this study is describe performance evaluation of research and development. Performance evaluation level of R&D have three levels: individual level, research group level, laboratory level. There are development evaluation factors and evaluation routin in each levels.
  17. Dae-Sig Kim;Tae-Woo Lee 171
    PDF
    본 연구는 건축에서 발생할 수 있는 미끄럼 사고와 추락 사고에 대한 예방과 계단 및 계단의 손잡이의 설계를 평가하고자 한다. 본 연구를 위하여 두 개의 추수가 다른 계단과 계단의 손잡이를 선택하였고, 계단과 계단 손잡이의 설계에 있어서 인체 측정치를 변수로 선정하였다. 실증을 위하여 설문을 분석, 결론을 도출하였다.
  18. 송원섭;김재봉 177
    PDF
    The organization of business included many a factors that gave rise to the stress. The modem peoples in this organization lived in the flood of the stress. Job stress was an important factors which injured of the employee health, the employee health injured reduce the organizational function. The factors such as personal differences, stressors, personality, cognitive traits etc. should be considered in the study of job stress. The cognitive appraisal is an important factor in the study of job stress and a process of coping strategy. Job stress can be controlled and coped by organizational and personal ability. The coping strategy of job stress is also determined by the personal differences rather than by the intensity of stress symptoms. In copying the stress, to be considered the factors such as interpersonal correlation, organizational climate, career development, job redesign, selection and placement, training. However, these factors should be managed in the scientific, objective, reasonable manner effectively.
  19. Chang-Ouk Kim;Kyung-Sik Kang 193
    PDF
    본 연구는 FMC(Flexible Manufacturing Cell)에 있어 상호 간섭이 없는 부품의 흐름을 제어하기 위한 교착제거방법(Deadlock Avoidance Method)에 대한 제안으로서, 이 방법이 주요한 장점은 첫째, FMC의 환경을 쉽게 적용시킬 수 있고 둘째, 공정상의 부품에 대한 dispatching 모듈이 협력하도록 설계되어 있다는 것이다. 교착제거방법은 두 개의 모듈로 구성되어 있는데 이는 순환발견알고리즘(A Cycle Detection Algorithm)과 원료주문 정책으로서, 특이할 만한 사항은 순환발견알고리즘을 채용하더라도 원료주문정책이 잘못될 수 있기 때문에 교착제거방법에 있어서 원료주문정책은 매우 중요하다는 것이다. 이를 위하여 교착전의 N-step 교착을 제거하고, 발견할 수 있는 교착제거방법과 N-step의 사전주무정책을 제시하였다.
  20. Chang-Ouk Kim;Kyung-Sik Kang 205
    PDF
    본 연구는 써버의 고장을 허용하는 단수써버 Queueing 시스템의 확률적 모델을 제시한 것으로, 써버는 N 제어 정책에 의하여 작동되며, 도착은 Stationary compound poisson에 의하여 이루어지고, 서비스 시간에 대한 분포는 Erlang에 의하여 발생하며, 수리시간에 대한 분포는 평균이 일정한 분포에 의하여 생성되는 경우를 고려하였다. 또한 고장간격 시간은 일정한 평균을 가진 임의의 분포를 가진 Renewal process에 의한다고 가정하였고, 완료 시간의 개념은 재생과정의 적용방법에 의하여 유도할 수 있으며, 시스템 크기의 확율 생성 함수의 값이 구해진다는 것을 제시하였다.
  21. 이석훈 219
    PDF
    For the equitable and objective evaluation of the performances of R & D (Research and Development) Projects, the quantitative evaluation of research products was performed. In this research, the AHP(Analytic Hierarchy Process) technique was used to calculate the relative importance(weight) of research products such as patents, thesis, conferences and man-power with make up individual questions. With calculated relative weight of research products, the model that gives the quantitative grades of research products was studied.
  22. 조진형;김성집 229
    PDF
    When we analyze equipment replacement problem, we take the table of the duration period of tangible fixed asset on the corporation income tax law, and treat depreciation as simple allocation process for capital recovery. In this problem, there are some papers considering the concepts of economic depreciation. Those are not perfect model from a economical point of view. Therefore, we deal with equipment replacement problem considering the engineering valuation as well as the economic concept in the evaluation of asset.
  23. Jeong, Sang Ho;Kim-Nung Jin 235
    PDF
    최근 국제무역질서에 있어 국제화, 세계화는 가속화되어가고 있으나 국내 산업계의 생산성과 효율성 등은 이에 미치지 못하고 있는 실정이다. 따라서 경영층의 강력한 리더십 및 종업원의 자발적인 참여를 바탕으로 종업원과 고객의 만족을 동시에 추구하여 궁극적으로는 조직의 장기적 발전에 초점을 맞추고 있는 TQM개념〔Richard, 1993〕의 도입이 급박한 상황이며, 실제로 많은 기업이 이의 도입을 추진 또는 완료하였다. 이미 도입이 완료된 기업에 대해서는 지속적인 평가 및 개선이 요구된다 하겠다. 본 논문에서는 대덕연구단지내의 K 엔지니어링사를 대상으로 조직구성원들의 품질시스템에 대한 인식 및 자체적인 평가에 근거하여, K 엔지니어링사 품질경영시스템상의 문제점도출 및 이의 개선책을 제시하고 하였다. 본 논문에 적용된 평가 모델은 TQM을 적용하는 유사기업들에서도 활용할 수 있으리라 사료된다.
  24. 배홍석;이만웅;송서일 243
    PDF
    In this study, a model and an analysis method for parameter design is presented a linear relation between the input signal and the ideal value of a performance characteristic. Furthermore, There presented a new performance measure, expected quality loss after adjustment, which is proved to be equivalent to Taguchi's SN ratio approximately. On the basis of this, a two-step optimization procedure is proposed for parameter design considering the signal factor and the quality characteristics with continuous variable. Proposed procedure and Taguchi two-stage procedure are compared.
  25. 김성태 255
    PDF
    This Paper presents a heuristic algorithm for machine-part group formation considering part production information (Production volume, roution sequence, unit operation time, facility size) in cellular manufacturing logistics system. In general, factory space is restricted within limited size when cells are located. A twofold heuristic algorithm is developed for considering factory space restrictions of located cells. The first phase is a aggregation procedure to minimize inter cell movement for satisfactoring space restriction. The second phase is a rearrangement procedure to maximize line balancing efficiency between machines within the cell and non assigned machine during first phase. Numerical example is presented to verify the efficiency of proposed algorithm.
  26. 박영화;이상환 265
    PDF
    This paper presents the intersectional dependence relations for the better efficient evaluation of the three tactical missile system(T.M.S) by use of multi-criteria decision making methodology. T.M.S alternatives A, B and C will be evaluated by Analytic Hierarchy Process(AHP) based on entropy weight in this study. A numerical example is presented to illustrate the use of entropy weight measurement with intersectional dependence problems. This problems are evaluated five criteria : tacticals criteria, technology criteria, maintenance criteria, economy criteria, advancement criteria.
  27. 김제홍;조남호 275
    PDF
    It can be made a definition that scheduling is a imposition of machinery and equipment to perform a collection of tasks. Ultimately scheduling is an assessment of taking order for which would be perform. So it is called "sequencing" in other words. In a job shop scheduling, the main object is to making delivery in accordance with the due date and order form customer, not to producing lots of quantity with minimizing mean flow time in a given time. Actually, in a company, they concentrate more in the delivery than minimizing the mean flow time. Therefore this paper suggest a new priority dispatching rule under consideration as below in a n/m job shop scheduling problem with due date. 1. handling/transportation time, 2. the size of customer order With this algorithm, we can make a scheduling for minimizing the tardiness of delivery which satisfy a goal of production.roduction.
  28. 조진형;김성집 285
    PDF
    In the case of existence of second-hand market, some methods for economic depreciation measurement have been developed. Among them, we consider two method. Those are Box -Cox model by Halten and Wykoff and Ratio method of T-factor by Iowa State University. Here, we suggest a new measurement method of economic depreciation based on the above two methods. According to the new method, we can get the failure rate of a equipment under the appropriate assumption. Then we can measure the economic depreciation more simply.
  29. 노인규;박찬웅 293
    PDF
    The breakdown of machines lead to the lateness of parts and the change of schedules. Its treatment is very important problem in the shop floor control system. In this study, we present an algorithm minimize the lateness, earliness and change of schedule by controlling machining speed of available machines. Production time and production cost required to manufacture a piece of product are usually expressed as a unimodal convex fuction with respect to machining speed, and each has its minimal point at the minimum time speed or the minimum cost speed, and a speed range between these two speeds is called 'efficiency speed range'. Therefore, the algorithm determines the machining speed in the efficiency speed range. An example is demonstrated to explain the algorithm.