권호 표지

산업경영시스템학회지 (Journal of Korean Society of Industrial and Systems Engineering) (Journal of Korean Society of Industrial and Systems Engineering)

한국산업경영시스템학회 (Society of Korea Industrial and System Engineering)

  • 계간
  • /
  • 2005-0461(pISSN)
  • /
  • 2287-7975(eISSN)

과학기술표준분류

  • 경제/경영 ＞ 경영전략/윤리

Aim & Scope

As the flagship journal of the Society of Korea Industrial and Systems Engineering, Journal of Society of Korea Industrial and Systems Engineering launched in 1978 publishes original high-quality papers on a wide range of topics of interest to industrial engineers who want to remain current with the state-of-the-art technologies. It aims to foster the engineering and business administration community by publishing papers with a strong methodological focus motivated by real problems that impact engineering practice and research. It is composed of various focus issues: design and manufacturing, operations engineering and analysis, quality and reliability engineering, intelligent information systems, scheduling and logistics and business administration. The journal published quarterly in March, June, September and December each year. The official title of the journal is 'Journal of Society of Korea Industrial and Systems Engineering' and the abbreviated title is 'J. Soc. Korea Ind. Syst. Eng.'. All submitted manuscripts are peer-reviewed by three reviewers. The text may be written in Korean or English. The abstract, acknowledgement, and references should be written in English. Some, or all, of the articles in this journal are indexed in Korea Citation Index (KCI). Manuscripts should be sent to the editorial office by the website, 'http://ksie.ne.kr' that is the URL address of the journal where full text is available. This journal was supported by the Korean Federation of Science and Technology Societies(KOFST) Grant funded by the Korean Government.

http://ksie.or.kr/run/thesis/thesis.php?bid=thesis KSCI KCI

제13권21호

  1. 김재철;장기복 1
    PDF
    The paper analyzes how an agency problem in one industry affects the nature of equilibrium in another related industry facing potential entry. It is shown that, under certain situation, the incumbent allows for entry and charges a higher price than that without the agency problem. And the incumbent can reap more profits as a result of entry. The socially optimal price may be higher than, equal to or lower than the price the incumbent charges.
  2. 오승헌 7
    PDF
    In the modern society where information system based on the computer in organization have been developed over again. A decision support system is one of the most popular topics. The computer have been discussed in relation to management strategy between enterprisers and researchers so far, but the accumulation of data resource and communication foundation have not been attended in actuality. The organic connection between business and information technique have been less progressed than our expectation. At this point of time. such a technical restrution getting removed, We have closed a gap between management strategy and computer. Now we are taking a growing interest in computer use for supporting proceedings decision, a lot of strategic marketing decision is wifely used in such a case, and the technical development is comming to advanced. In this study, I Investigate such a new tendency as strategic program and proceedings decision system. I will especially focus my study on a strategic program and a budget control corporation, so to speak, on strategic budget management system. Concretely the purpose of this study is to investigate what functions the proceedings decision support system requires in order to deal with the problem of strategic level and to practically establish the system with the use of DSS GENERATOR/ARISTOTLE in my laboratory.
  3. 오형술 11
    PDF
    Because of the descent trend of the recent oil price and the ascent elements of the manufacturing price of public coal. the future demand of public coal is very obscured. In this paper, forecast the public coal demand by the regression analysis method reflected the policy and economic index of alternative energies.
  4. 김정식 19
    PDF
    This paper deals with a problem of choosing an optimum inspection period for an equipment with two stages of failures. Stage I failure which can be detected only through inspection detenorates the equipment and causes critical stage II failure after a random period of time. The expected average cost function is obtained and an optimum inspection policy is discussed. A numerical example is also worked out.
  5. 이원희 25
    PDF
    In this paper we consider the one-period inventory model in which it is required to determine the selling quantity which maximizes the probability of realizing a predetermined level of profit L. The Assumptions used in this paper are willing to accept the rel life considerations, which are thestochasic supply, the discounted selling price and the discounted purchasing cost for the over-supply etc.
  6. 홍상우 29
    PDF
    An assessment of risk in industrial and urban environments is essential in the prevention of accident and in the analysis of situations which are hazardous to public health and safety. The risk imposed by a particular hazard increases with the likelihood of occurence of the event, the exposure and the possible consequence of that event. In a traditional approach, the calculation of a quantitative value of risk is usually based on an assignment of numerical values of each of the risk factors. Then the product of the values of likelihood, exposure and consequences called risk score is derived. However vagueness and imprecision in mathematical quantification of risk are equated with fuzziness rather than randomness. In this paper, a fuzzy set theoretic approach to risk analysis is proposed as an alternative to the techniques currently used in the area of systems safety. Then the concept of risk evaluation using linguistic representation of the likelihood, exposure and consequences is introduced. A risk assessment model using approximate reasoning technique based on fuzzy logic is presented to drive fuzzy values of risk and numerical example for risk analysis is also presented to illustrate the results.
  7. 김진규 43
    PDF
    Fault tree analysis(FTA) is available to the engineer for determining reliability of complex industrial safety system. Therefore quantitative aspects of FTA greatly multiply its power this paper proceeds of presenting the methodology of FTA, including an approach to constructing in fault tree. A working guide to the use of FTA for the purpose of cost/benefit determination in industrial safety system is given. Finally, an analytic method for uncertainty analysis of the top event of a complex system is described.
  8. 박주녕;송서일 51
    PDF
    In this paper we deal with the miniaml cost network flow problem with uncertain arc capacity constraints. When the arc capacities are fuzzy with linear L-R type membership function, using parametric programming procedure, we reduced it to the deterministic minimal cost network flow problem which can be solved by various typical network flow algorithms. A modified Algorithm using the Out-of-kilter algorithm is developed.
  9. 이상도;이강우 61
    PDF
    In the past, a fundamental technique in inventory control system was to rank the items of a inventory from a distribution by value to draw an ABC curve. Unfortunately the use of ABC categorization technique has created problems and introduced some gross errors into the inventory control system. First, the author considers the possible applications of the technique in the real world and then attempts to discuss ABC fallacies through the literatures. Finally, an inventory categorization algorithm by the principal component analysis is derived and a numerical example is also presented to illustrate the algorithm.
  10. 이회식;황의철 73
    PDF
    The quality and cost of manufacturing products is a significant problem in view of duality assurance, but the quality level of the incoming materials is not considered to determine in the economic order quantity of conservative inventory model. A typical situation we face is the difference of quantity between order quantity and the determined outgoing quantity after acceptance inspection. In this paper we present a procedure to reduce the difference of order(ingoing) quantity and outgoing quantity of incoming materials a method of justifying the acceptance plans whether accept or not by comparing with ingoing outgoing quality.
  11. 황의철;이영식 81
    PDF
    In stratified random sampling a simple random sample must be taken in each stratum to reduce the maximum gain in precision given the minimum cost. The purpose of this paper is to deal with the propertics of the estimates and variances and obtain the economic design of stratified random sampling through the optimum allocation of the sample sizes. In addition, the between stratum variation and the within stratum variation is stratifying the population are described.
  12. 최성운 91
    PDF
    This paper is concerned with the development of optimal algorithms for multi-stage flowshop scheduling problems with sequence dependent setup times. In the previous researches the setup time of a job is considered to be able to begin at the earliest opportunity given a particular sequence at the start of operations. In this paper the setup time of a job is considered to be able to begin only at the completion of that job on the previous machine to reflect the effects of the setup time to the performance measure of sequence dependent setup time flowshop scheduling. The results of the study consist of two areas; first, a general integer programming(IP) model is formulated and a nixed integer linear programming(MILP) model is also formulated by introducing a new binary variable. Second a depth-first branch and bound algorithm is developed. To reduce the computational burdens we use the best heuristic schedule developed by Choi(1989) as the first trial. The experiments for developed algorithm are designed for a 4$\times$3$\times$3 factorial design with 360 observations. The experimental factors are PS(ratio of processing time to setup time), M(number of machines), N(number of jobs).
  13. 권희철 101
    PDF
    This study presents a two-level inventory distribution system with one-upper level facility(warehouse) in first echelon and n-lower level facilities(stores) in the second echelon. The demand process at the upper level is induced by the aggregated backorder processes of n independently operated lower level facilities in parallel. For the upper level and the lower level we find the decision points and the distribution function of the aggregate backorders from n-stores. Optimal allocation units and expected system profits are obtained. If the product is of great enough importance to the customer, echelon structure will include a shadow installation. Also, this case is analyzed. Numerical examples are presented to illustrate the results for each case.
  14. 이달상;김만식 111
    PDF
    This paper treats the problem to schedule for train with low transit priority so as to maximizing the number that can be sent during given time without interfering with the fixed schedule for train with high transit priority in a track. We transform the this problem into Time-Expanded Network without traverse time through application of Ford-Fulkerson Model, develop a TENET GENerator(TENETGEN) and obtain the data of TENET using developed TENETGEN. Finally, we seek the optimal solution to these data with Dinic's Maximal-Flow Algorithm and examine the availability of our procedures in personal computer.
  15. 남호기 119
    PDF
    본 연구는 컴퓨터 지원 제조시스템 (CIM)의 특징 및 의사결정시 고려되어야 할 사항들이 서술되었다. CIM의 복잡성을 표현하기 위해서 목적지향시스템 및 인공지능의 개념·구조가 상세히 설명되었다. CIM하에서 독립적 시스템을 통합하는데 발생되는 통신정보를 표현하기 위해서 목적지향시스템 및 인공지능 기법이 이용되었다.
  16. 이병근;이상도 127
    PDF
    Industrial accidents and the resulting worker injuries have adverse effect on industry. From a financial perspective, these effects are realized in large sums of money, perhaps 1.5 billions of wons which are spent last year. In the past. industry in general was not aware of the high costs incurred through injuries to workers. However, this trend has changed in recent years. This paper shows that middle managers have a critical job with respect to safety in workers. The safer middle managers have better resulting than unsafe ones. This is because the workers are more efficient and productive when acting safely. Consequently, this study was primarily an attempt to identify the relationship among middle manager behavior, job site policies, and interpersonal relationships on the job as the affect work safety and performance. More specifically this study focused on the investigation of the research questions by testing the hypotheses.
  17. 이상완;김재연 133
    PDF
    Human blood is a perishable product : it has a legal lifetime of 21 days from collection, during which it can be used for transfusion to a Patient of the same type, and after which it has to be discarded. Therefore, blood must be supplied safely and effectively because it is one of the medical resources which keep humanlife. In this study, the effects of blood issuing policies on average inventory levels and average age of blood at transfusion are determined by simulation applied the theory of absorbing Markov chains. And as a practical study, the daily demand distribution of blood is estimated by using the data of B General Hospital. The distribution estimated follows poisson distribution and the estimator of parameter estimated from the poisson distribution is 0.762. Simulation is done by using the parameter. The most important problem when control blood is the amount of outdata. So we compared random policy with Modified LIFO and Modified FIFO by using outdata. As a results it is shown that Modified LIFO and Modified FIFO by using outdata. As a results it Is shown that Modified LIFO and Modified FIFO present better issuing policy than Random Policy.
  18. 오명진;최종덕 143
    PDF
    This paper studies a single machine scheduling problem in which all jobs have the common due date and penalties are assessed for jobs at different rates. The scheduling objective is to minimize the weighted mean absolute deviations(WMAD). This problem may provide greater flexibility in achieving scheduling objectives than the mean absolute deviation (MAD) problem. We propose three heuristic solution methods based on several dominance conditions. Numerical examples are presented. This article extends the results to the problem to the problem of scheduling n-jobs on m-parallel identical processors in order to minimize the weighted mean absolute deviation.