권호 표지

산업경영시스템학회지 (Journal of Korean Society of Industrial and Systems Engineering) (Journal of Korean Society of Industrial and Systems Engineering)

한국산업경영시스템학회 (Society of Korea Industrial and System Engineering)

  • 계간
  • /
  • 2005-0461(pISSN)
  • /
  • 2287-7975(eISSN)

과학기술표준분류

  • 경제/경영 ＞ 경영전략/윤리

Aim & Scope

As the flagship journal of the Society of Korea Industrial and Systems Engineering, Journal of Society of Korea Industrial and Systems Engineering launched in 1978 publishes original high-quality papers on a wide range of topics of interest to industrial engineers who want to remain current with the state-of-the-art technologies. It aims to foster the engineering and business administration community by publishing papers with a strong methodological focus motivated by real problems that impact engineering practice and research. It is composed of various focus issues: design and manufacturing, operations engineering and analysis, quality and reliability engineering, intelligent information systems, scheduling and logistics and business administration. The journal published quarterly in March, June, September and December each year. The official title of the journal is 'Journal of Society of Korea Industrial and Systems Engineering' and the abbreviated title is 'J. Soc. Korea Ind. Syst. Eng.'. All submitted manuscripts are peer-reviewed by three reviewers. The text may be written in Korean or English. The abstract, acknowledgement, and references should be written in English. Some, or all, of the articles in this journal are indexed in Korea Citation Index (KCI). Manuscripts should be sent to the editorial office by the website, 'http://ksie.ne.kr' that is the URL address of the journal where full text is available. This journal was supported by the Korean Federation of Science and Technology Societies(KOFST) Grant funded by the Korean Government.

http://ksie.or.kr/run/thesis/thesis.php?bid=thesis KSCI KCI

제22권51호

  1. 조영찬;송서일 1
    PDF
    In recent industry society, it is revealed that, as an increase in the use of automated manufacturing and process inspection technology, the data from mass production system exhibits some degrees of autocorrelation. The operation characteristics of traditional control charts developed under the independence assumption are adversely affected by the presence of serial correlation. Therefore, when autocorrelated construction contacted with time-series models explain, the time-series models are the Box-Jenkins forecast models which have been proposed as the best forecasting tool which allows for partitioning of variation into result from the autocorrelation structure and variation due to unusual but assignable causes. In this paper, for the AR(1) process of Box-Jenkins forecast models, when the constant term ξ are zero and different from zero, I want to analyze the sensitivity of (equation omitted), CUSUM and EWMA control chart for forecast residuals.
  2. 이철우 11
    PDF
    This study intends to define $\ulcorner$personality$\lrcorner$ as $\ulcorner$Human-ware$\lrcorner$ based on $\ulcorner$Gene-ware$\lrcorner$ in business management. The sides of personality in management are important source of manifestation of ‘Synergy’, because the importance of personality, that is, $\ulcorner$attitude$\lrcorner$ in individuals is increasing compared with the traditional techniques, $\ulcorner$craft$\lrcorner$. In this work it is considered that Human-ware activates interchange in reciprocal relation between Gene-ware and Hard-ware and performs balancing, intermediating (catalyzing) functions in relative that things(Geneware $\leftrightarrow$ Humanware $\leftrightarrow$ Hardware). $\ulcorner$Gene-ware$\lrcorner$ represents factor and phenomena of life in evolutionary information as human instincts, system of Gene-duum(Gene＋Residuum(in phenomenology) ), Synchronization(in structuralism). In this view, this paper defines the concepts and effects of personality in management as the results of creative and stational functions of Human-ware. And this paper intends to identify the strata of psycho in human as three vertical aspects of $\ulcorner$Manifest$\lrcorner$, $\ulcorner$Latent$\lrcorner$, and $\ulcorner$Found$\lrcorner$, in this respects, function of Human-ware have analogy to that of Manifest in psychological behaviors. Finally, reviewing the Ford system based on Fordism and Taylor's system in Industrial Engineering, pursues the meaning and importance of personality, that is Humanware in management.
  3. 백시현;김내헌 21
    PDF
    The TSP(Traveling Salesman Problem) is one of the most widely studied problems in combinatorial optimization. The most common interpretation of TSP is finding a shortest Hamiltonian tour of all cities. The objective of this paper proposes a new heuristic algorithm MCH(Multi-Convex hulls Heuristic). MCH is a algorithm for finding good approximate solutions to practical TSP. The MCH algorithm is using the characteristics of the optimal tour. The performance results of MCH algorithm are superior to others algorithms (NNH, CCA) in CPU time.
  4. 오광기;이상용 29
    PDF
    The distribution center location and routing problem involves interdependent decisions among facility, transportation, and inventory decisions. The design of distribution system affects the customers' purchase decision by sets the level of customer service to be offered. Thus the lower product availability may cause a loss of demand as falls off the customers' purchase intention, and this is related to the firm's profit reduction. This study considers the product availability of the distribution centers as the measure of the demand level change of the demand points, and represents relation between customer service and demand level with linear demand function. And this study represents the distribution center location and routing to demand point in order to maximize the total profit that considers the products' sales revenue by customer service, the production cost and the distribution system related costs.
  5. 문덕희;김대경 41
    PDF
    In this paper, a load balancing problem among operators is considered, when one or more machines can be assigned to an operator. The machines are grouped into two types and there are more than one machines in each group. The type of machine in which a job can be processed, is determined. However, an operator can handle both types of machine. The elementary operations of a job are classified into three classes : machine-controlled elements, operator-controlled elements and machine/operator- controlled elements. The objective is to balance the workloads among operators under the constraints of available machine-time and operator-time. A heuristic solution procedure is suggested for allocating jobs to machines and allocating machines to operators. The performance of the algorithm is evaluated with various data set.
  6. Yang, Hee Joong 53
    PDF
    평균치에 적용되는 credibility formula를 분산에도 적용하여 응용 할 수 있는 extended credibility formula를 개발한다. 간단한 베이지안 신뢰도 예측모형을 구축하고 이 모형에 extended credibility formula를 적용한다. 감마 사전분포 - 포아송 우도의 경우와 베타 사전분포 - 이항분포 우도의 경우에 대해 extended credibility formula를 적용해 관측치에 주어진 가중치에 따라 사후 분산이 어떻게 변화하는지를 분석한다. 사후분산도 사후평균과 마찬가지로 사전값과 관측값의 가중평균으로 표시될 수 있다는 것을 증명한다. 가중치와 불확실성 감소율간의 관계도 연구된다. 이와 같은 가중치에 따른 사전 및 사후분포의 변화 양식에 대한 이해는 올바른 사전분포를 설정하는데 큰 도움이 될 수 있다.
  7. 강영식;함효준 63
    PDF
    Many firms have applied flexible manufacturing systems as a means of increasing productivity, profitability, and quality. Therefore, the purpose of this paper is to develop the more efficient justification model through an analytical scoring model with the quantitative factors, flexibility factors, and safety factors under uncertainty. In this paper, the three factors for properly comparing and evaluating of flexible manufacturing systems are presented. Especially, this paper has emphasized the flexibility and safety factor; the one consists of organization assessment, process treatment function, products and products quantity, useful life assesment, and software function, the other presents risk assesment, Y2K problem, safety device analysis, total productive management system, safety management. Finally, a normalized scoring model by the new flexibility and safety factors can be used in real fields for flexible manufacturing systems project selection under uncertainty.
  8. Chung, Byung Hee;Yoon, Chang Won 73
    PDF
    본 연구에서는 다양한 종류의 공정을 수행할 수 있는 가공장비와 자동화된 물류 운반시스템으로 구성된 FMS의 효율적 운영을 위해 셀 제조방식의 개념을 도입한 다수의 유연셀 형성 방법을 제시하고 있다. 서로 독립적인 유연셀의 형성을 위해 FMS의 장점인 공정유연성을 최대한 활용할 수 있도록 기계-공정 행렬과 부품-공정 행렬에 기초한 2 종류의 새로운 유사도 계수와 예외적 요소의 수를 최소화하기 위한 셀 형성 알고리즘을 개발하였다. 두 행렬들은 다공정 수행가능기계간 유사도와 기계셀과 부품간 비처리 능력지수 산출의 기초자료로 사용된다. 알고리즘은 예외적 요소의 수를 최소로 하면서 셀의 수를 최대로 하는 정리에 기초하여 공정을 기계에 할당하며, 다수의 대체경로가 유연셀내에서 형성될 수 있도록 크게 2 단계로 구성되어 있다. 마지막으로 수치예제와 함께 예외적 요소의 발생수를 척도로 하여 기존의 방법들과 비교, 평가하고 있다.
  9. 김정기;허선 89
    PDF
    본 논문에서는 음성호 및 데이타호를 동시에 서비스하는 계층구조를 가지는 CDMA 셀룰러 시스템에서 트래픽 특성을 고려한 효율적인 채널 할당 알고리듬을 제안한다. 제안된 채널할당 알고리듬은 신규호나 핸드오프호가 마이크로셀에 접속을 시도하고 만약 여유채널이 존재하지 않으면 상위계층인 매크로셀로 오버플로우(Overflow)되는 방식을 Birth-Death Process를 이용한 Stochastic Model로써 모델링한다. 특히, 이 모델에서는 핸드오프 전용채널을 두고 이 핸드오프 전용채널의 수에 따른 블록킹확률을 구한다. 이 결과를 이용하여 적정한 서비스품질(QoS)을 만족하는 핸드오프 전용채널의 수를 결정한다.
  10. 주종혁 99
    PDF
    B-ISDN link dimensioning is often known as a difficult problem because of the characteristics of Asynchronous Transfer Mode(ATM) such as various Quality of Services of different service requirements, and the statistical multiplexing resulting from virtual path/virtual circuit connections. In this paper, we propose a nonlinear integer optimization model for dimensioning B-ISDN considering the statistical multiplexing effects of virtual path connections(VPCs) and the modularity of resources allocated to a transmission link. The algorithm based on the simultaneous linear approximation technique as well as some numerical results will be also presented.
  11. 김종인;양성환;박범 109
    PDF
    Most of carrying works have been performed in almost all production process, conveyer objects, machine equipment and work method. Then, they are made by unfitted design which doesn't consider physical condition of workers. So, it causes them to bring about forceful motion. This study investigated the back power for what difference between lumbar bending angle and back power by selecting 21 male aged 22∼30 years old. Lumbar angle were shared each 30, 60, 90 degrees and measured. The results of this study was that as lumbar angle was increasing, back power was decreased and were very significant differences for angles respectively. Besides. sample correlation coefficients were calculated in order to analyze the relationship between back power, anthropometric dimensions and grip strength. Back power was correlated with weight, arm length, hand length, breadth of palm, breadth of lower arm, breadth of wrist and left-right grip strength.
  12. 김동규;박재현;강경식 117
    PDF
    Modern production control systems based on MRPⅡ (Manufacturing Resource planning) didn't solved about the capacity and lead time problems. In the past, It solved that problems under deterministic. Therefore, the problem about determination of correct lead time and finite capacity are studied continuously by researchers. Now, we need to a integrated method that is from low level to high level instead of top-down in MRP. In this research uses the MRP-C(Capacitated Material Requirement Planning) concept that is more efficient then MRP system for capacity and flexible lead time , and shows the MRP-C algorithm and the prototype.
  13. 현상필;이홍희 129
    PDF
    The aim of this research is the development of an automated fixture planning system for prismatic parts using the case-based reasoning (CBR). CBR is the problem solving paradigm that uses the similarity between a new problem and old cases to solve the new problem. This research uses CBR for the fixture planning. A case is composed with the information of the part, the components of fixture and the method of fixing for the part. The basic procedure is the retrieval and adaptation for the case, and this research presents the method of retrieval that selects most similar case to the new situation. The retrieval-step is divided into an index matching and an aggregated matching. The adaptation is accomplished by the modification, which transforms the selected case to the solution of the situation of the input part by the specified CBR algorithm. The components of fixture and the method of fixing are determined for a new part by the procedure.
  14. 유우식 139
    PDF
    Developed in this paper is a prototype extranet using mobile device such as Personal Digital Assistance(PDA) or Handheld PC(HPC). Especially an adjustment transaction system for auto insurance using wireless data communications is described. Using infrastructures such as PCS, Cellular, Private Radio, wireless communications offers tremendous applications in Korea. A survey of such applications is presented in this paper. Also an analysis of currently available infrastructures of wireless communications is described in this paper. The scheme of an adjustment transaction consists of seven steps: (1) get list of adjustment, (2) obtain insurance information, (3) check police record, (4) get an accident record, (5) get bluebook value, (6) examine the car, (7) file report. Comparing with the previous on-line method that spends much time on gathering data, the proposed system guarantees more rapid transaction using wireless communications.
  15. 오병완;최진영 151
    PDF
    For many decades, Deterministic DCF approach has been widely used to evaluate investment opportunities. Under new manufacturing conditions involving uncertainty and risk, the DCF approach is not appropriate. In DCF, Risk is incorporated in two ways: certainty equivalent method, risk adjusted discount rate. This paper proposes a determination method of the Risk Adjusted Discount Rate for economically decision making advanced manufacturing technologies. Conventional DCF techniques typically use discount rate which do not consider the difference in risk of differential investment options and periods. Due to their relative efficiency, advanced manufacturing technologies have different degree of risk. The risk differential of investments is included using $\beta$ coefficient of capital asset pricing model. The comparison between existing and proposed method investigated. The DCF model using proposed risk adjusted discount rate enable more reasonable evaluation of advanced manufacturing technologies.
  16. Nam, Sang Jin;Lee, Kang Woo;Kim, Jung Ja 163
    PDF
    본 연구는 혼합모델 조립라인의 길이를 최적화하고 이 라인의 길이에서 완성시간을 최소화하는 새로운 제품투입순서를 결정하기 위하여 이단계법(two phase method)을 사용하였다. 최적화된 라인의 길이를 가지고 완성시간을 최소화하면 이 완성시간은 최적해이거나, 최적해에 가까운 근사해이고 이때 제품투입순서는 두 목적함수를 만족하는 새로운 투입순서이다. 제안된 이단계법으로 수식화한 모델들은 수치예를 통해 여러 가지 문제들을 실행한 결과 두 목적함수를 각각 실행시킨 결과보다 좋은 결과임을 증명하였다.
  17. 강규철 175
    PDF
    The notion of productivity has been extended from the quantitative change of input factors to the efficiency change meaning efficient use of resources, and to the technical change meaning the qualitative improvement of input resources. In this way, the technical change is termed as total factor productivity in the individual businesses or the manufacturing industries. They should efficiently respond to the variations of economic environment and at the same time, have to make the efforts to improve productivity by increasing managerial efficiency and rasing the level of technology change for the continuous growth. Considering the growing importance of productivity, this study closely examines the factors influctuation on the productivity, fluctuation using total factor productivity in korean manufacturing industries. For the objective this study investigates the methods of measurement about total factor productivity, establishes the hypotheses based on the preceding research and finding. The results are obtained through the examination on the outcoms of regression analysis and related data. The results can be summarized as follows, First, in the progress of korean industrialization, the qualitative growth does not depend on the total factor productivity of the technical advance, and does not lead to the industry expansion. That is, the contribution of total factor productivity turns out to be relatively low. Second, it is necessary for the manufacturing industry to improve the level of technology and to emphasize the innovation of business, since the capital investment does not completely become fixed in the growth rate of productivity. Finally, continuous R&D investment should be made to increase total factor productivity. Namely, the regulation of industrial structure with an intensive technical development is essential and should be based on scientific and technical knowledge.
  18. 이상완;박병주 189
    PDF
    Assembly line balancing problem is known as one of difficult combinatorial optimization problems. This problem has been solved with linear programming, dynamic programming approaches. but unfortunately these approaches do not lead to efficient algorithms. Recently, genetic algorithm has been recognized as an efficient procedure for solving hard combinatorial optimization problems, but has a defect that requires long-run time and computational complexties to find the solution. For this reason, we adapt a new method called the Critical Node Method that is intuitive, easy to understand, simple for implementation. Fuzzy set theory is frequently used to represent uncertainty of information. In this paper, to treat the data of real world problems we use a fuzzy number to represent the duration and Critical Node Method based heuristic procedure is developed for solving fuzzy assembly line balancing problem.
  19. 이공섭 199
    PDF
    The number of car accident is Recently on the increase in Korea because of the explosive increase of cars, the poor road condition, the lack of safety facility, and others. The insurant with a accident has to decide whether receiving a insurance or not. In this paper, we represent a reasonable decision support material by calculating the approximate insurance fee based on the discount rate and premium additive rate, which is changed by the accident type and the accident expenditure. Practically, there is difference in the standard insurance rate and premium additive rate according to the accident type and the accident expenditure in Korea. The premium additive rate is assessed considering the number of accident, the pattern of accident, and the reason of accident for 3 years. In this paper, we represent a decision making method considering not only the first-time car accident but also the future car accident. For considering the repeated accident, we analyzed the real data accumulated until the year of 1996 from S Insurance Company, and estimated the probability density function between the first and the second-time accident, and executed the goodness of fit test using ARENA and STATISTICA software. Using this conditional PDF, we can calculate the insurance fee next 3 years and compare the insurance fee with the equivalent present value of cash flows. The program performing this analysis is represented, and written in VISUAL BASIC Language. We tried to suggest an accurate guideline for the insurant to decide the insurance coverage rationally, and tried to correct a wrong idea of dependence on the car insurance only by the amount of the accident expenditure. And we expect this study can generally be applied to many different accident types under the uncertain circumstances in our daily life.
  20. 조남호;우태희;한우철 211
    PDF
    The purpose of this study is the necessity of collaboration, equilibrium or the differences of examination items about certification system which is focused on products, such as KS, formal approval, and ISO 9000 family, QS 9000, etc, for Quality management system. We make expert group control this problem. Also we make examination items to be united. And the differences of certification body and personnel necessary is dissolved by proper instruction. Examination process and corrective maintenance should be improved by clarity, fairness and reliability. Problems through preparation for certification and certified company should be focused on reform of consciousness of top management and continuous instruction. And desirable solution for mutual certification problem and others should be found by information interchange system of international cooperation.
  21. 정한욱;이희남;이창호 221
    PDF
    Many enterprises are performing the production planning computerization for survival in unlimited competing period. But it is very difficult to directly apply many production planning softwares to the domain-specific areas of many small enterprises because one enterprise is different from the others with respect to product type, production process, and order fulfillment method. Practically most small enterprises depend on experienced production managers in production planning, so then many problems such as overtime work and cost have been appeared. The purpose of this study is to develop production planning module for order-made production system in order to reduce overtime works and surplus costs. We developed production planning module with RDBMS, which is fit for small manufacturing company. Developing this software, we use Visual Basic 5.0 to provide GUI environment for the production planning module and Microsoft Access 97 is used to construct Database. This production planning module is applied to enhancement of productivity in M manufacturing company located in Asan.
  22. 강동진;이상용;유왕진;정용식 231
    PDF
    A major concern in Concurrent Engineering is the control and management of workload in a period of process. As a general rule, leveling the peak of workload in certain period is difficult because concurrent processing is comprised of various processes, including overlapping, paralleling looping and so on. Therefore, the workload management with resource constraints is so beneficial that effective methods to analyze design process are momentous. This study presents the Timed Petri Nets approach of precedence logic networks, and provides an alternative for users to analyze constraint processes to resolve conflicts of resources. Another approach to Continuous Time Markov Chain using Stochastic Petri Nets is also proposed. These approaches are expected to facilitate resolving resource constrained scheduling problems more systematically in Concurrent Engineering environment.