권호 표지

산업경영시스템학회지 (Journal of Korean Society of Industrial and Systems Engineering) (Journal of Korean Society of Industrial and Systems Engineering)

한국산업경영시스템학회 (Society of Korea Industrial and System Engineering)

  • 계간
  • /
  • 2005-0461(pISSN)
  • /
  • 2287-7975(eISSN)

과학기술표준분류

  • 경제/경영 ＞ 경영전략/윤리

Aim & Scope

As the flagship journal of the Society of Korea Industrial and Systems Engineering, Journal of Society of Korea Industrial and Systems Engineering launched in 1978 publishes original high-quality papers on a wide range of topics of interest to industrial engineers who want to remain current with the state-of-the-art technologies. It aims to foster the engineering and business administration community by publishing papers with a strong methodological focus motivated by real problems that impact engineering practice and research. It is composed of various focus issues: design and manufacturing, operations engineering and analysis, quality and reliability engineering, intelligent information systems, scheduling and logistics and business administration. The journal published quarterly in March, June, September and December each year. The official title of the journal is 'Journal of Society of Korea Industrial and Systems Engineering' and the abbreviated title is 'J. Soc. Korea Ind. Syst. Eng.'. All submitted manuscripts are peer-reviewed by three reviewers. The text may be written in Korean or English. The abstract, acknowledgement, and references should be written in English. Some, or all, of the articles in this journal are indexed in Korea Citation Index (KCI). Manuscripts should be sent to the editorial office by the website, 'http://ksie.ne.kr' that is the URL address of the journal where full text is available. This journal was supported by the Korean Federation of Science and Technology Societies(KOFST) Grant funded by the Korean Government.

http://ksie.or.kr/run/thesis/thesis.php?bid=thesis KSCI KCI

제20권44호

  1. 최정상;고낙용 1
    PDF
    In this paper a new heuristic algorithm has been developed and presented for minimizing the total completion time of a scheduling problem in a multi stage automated machining and assembly systems. The proposed Higher Ratio First(HRF) algorithm is based on the idea that jobs with higher processing time ratio should be a higher priority. The heuristic algorithm is implemented on the various problem cases by number of jobs and machines. The proposed algorithm provided smaller makespan than the makespan applied by three previously documented heuristics. The results obtained show a superior solution by the new heuristic over previous heuristics on all problem sizes.
  2. 김재붕 13
    PDF
    The modem society has been talked as the age of uncertainty, the age discontinuity and the information society. The future society is forcasted the creativity society. Both the achievement motive and the creativity be suggested as an important factors to accomplish the individual goals and organizational performance. The achievement motive has the major implications in increasing the level of achievement motive between high and low creative group. The employee creativity is the emergence in action of a novel relational product, growing out of the uniqueness of the individual on the hand, and materals, events people or cirumstances of his life on the other. It has been treated as an impotant factor to solve the complex management ploblems for the management. The major purpose of this study are (1) to review the theory of an achievement motivation and the creativity, (2) to provide both management and scholars with the practical and useful implications on the development of the employee cretivity in improving the management performance.
  3. 한수희;오형술 33
    PDF
    The location decision problem for distribution center is one of the most important problem in business logistics system. Because the proportion of holding and transportation cost to physical distribution cost in our country exceed the 60%, a corporation must feel strong pressure to investigate the location problem for distribution center. This paper presents an algorithm for determining the best location of distribution center in consideration with physical distribution cost, demand, and customer location. The methods of determining the distribution center location is that firstly many of proposed sites are built up where demand position is distributed, and then optimal location of distribution center is selected.
  4. 한성배;조현규;박상봉 47
    PDF
    Today, more and more information is processed in the shop floor The main function of the shop floor is more enlarged and enriched by the integration of information processing tasks. So, we have designed the shop floor control information system(SFCIS) considered using the IDEF methodology. The SFCIS consists of 5 sub-systems, which are the manufacturing data base, the order release, the dynamic scheduling, the process control, and the output analysis sub-system. And we have constructed the SFCIS for long-cycle products, which have production lead time longer than the period of production planning horizon.
  5. 최진영 61
    PDF
    The algorithm of customer demand decomposition suggested by this study is a reconstruction method of distribution network under the allowance of same level supply. Regional distribution center(RDC) distributes additional inventories of some of the supplying items to retailers under its charge to reduce the time needed for emergency delivery to neighborhood retailer where backlog happened. This also restrict the purpose of the inventories held by RDC as only regular supply. All of which leads to the creation of more realistic method allowing the affiliation of closing related RDC with one in the vicinity. In this study, the role of RDC is restricted only as supplying items regularity and the conruction of distribution system processing through the closing by consideration of the possibility of supplying retailers from the RDC in the vicinity is discussed.
  6. 장경;양문희 69
    PDF
    We investigate both of central and dispersion tendencies of the observed test statistics in control charts in order to judge whether a production process is abnormal or not. In order to do it, first, we study about detection of changes of the population mean as a central tendency The $\bar{x}$ and x control charts are used for detecting the change of the population mean $\mu$. We shows the probability detecting the change of population mean using the $\bar{x}$ and x control charts. Secondly, we study about detection of changes of the population standard deviation as a dispersion tendency in the s control chart. In our studies, for the given several parameters the detection probabilities of changes of central and dispersion tendencies are calculated, the necessary sample size values n are suggested for detecting the changes, and their informations are given as various tables.
  7. 정호연 81
    PDF
    The purpose of this paper is to develop a method of paramatric analysis that can be applied to an optimal solution of a maximum flow problem. We first define the transformed network corresponding to a given network. In such a network, we conduct paramatric analysis by determining changes in the optimal solution precipitated by changes in the capacity as the arc capacity varies from 0 to infinite. By this method we can easily calculate not only the characteristic region where the given optimal solution remains unchanged, but also the characteristic region where the value of the maximal flow gradually increases or decreases. The proposed method is demonstrated by numerical example.
  8. 임승환;이동춘 93
    PDF
    This paper describes the application of Genetic Algorithms(GAs) to nonlinear constrained mixed optimization problems. Genetic Algorithms are combinatorial in nature, and therefore are computationally suitable for treating discrete and integer design variables. But, several problems that conventional GAs are ill defined are application of penalty function that can be adapted to transform a constrained optimization problem into an unconstrained one and premature convergence of solution. Thus, we developed an improved GAs to solve this problems, and two examples are given to demonstrate the effectiveness of the methodology developed in this paper.
  9. Sungwoon Choi;Youngbae Chung 103
    PDF
    본 연구는 우선 ISO 9000의 배경, 구조 및 인증에 따른 혜택과 전망에 대해 알아보고 MQA, IQS 등 13가지 ISO 9000 전개 방법을 조사한다. 끝으로 일본, 미국을 비롯한 6개국과 TickIT, 대학, 공공분야에서 적용된 다양한 사례를 소개한다.
  10. 양성환;박범 123
    PDF
    A data base design framework for predictive a preventive-maintenance system is presented in this paper in order to effectively control machines and reduce accident rates in the workplace. The data base is designed to meet general management requirements to evaluate different maintenance strategies. There are seven data files: the equipment list maintenace pesonnel, maintenance history, maintenance specification, spare part, maintenance equipment, and maintenance schedules. Each data base file has several record based upon data acquisition.
  11. 이재하;장경 129
    PDF
    The purpose of this study is to estimate the distribution rate of R&D input on R&D output in major manufacturing industrial sector. The distribution rate is estimated on time-series data for the period 1980 to 1996. The data used in this study can be divided into the two categories. 1) R&D output data (Patent, Utility) 2) R&D input data (R&D expenditure, R&D workers) The raw data of R&D expenditure is transformed into R&D stock. And the specific production function is used to represent the interaction between R&D input and output. The production function shows the maximum rate of R&D output that can be achieved by certain given, technologically possible, R&D input combinations. The main findings can be summarized as follows. 1) There was a diminishing return between R&D input and output$(\alpha+\beta<1). 2) R&D output growth was more affected by R&D expenditures than R&D workers. 3) R&D workers were more contributed highly to Patent granted than Utility model.
  12. 안춘수;강태건;정상윤;홍성일 135
    PDF
    In this paper, we propose a simple and relatively efficient heuristic method to determine job sequencing in the flow-shop considering multiple criteria such as processing time, due date and cost. The proposed method is applicable to the flow- shop where the jobs are released simultaneously and their processing sequence is predetermined and not changed until the whole jobs are processed. To develop this method, we mixed and modified some well-known multi-attribute decision heuristics such as the simple linear weighting scheme, the lexicographic rule and the 'elimination by aspect' rule. Some computer simulations were conducted to test the efficiency of the proposed method and it has been compared with the SWPT (Shortest Working Processing Time) rule and EDD (Earliest Due Date) rule. The results show that our method is as effective as the traditional ones in terms of mean flow time, tardiness, makespan, cycle time, machine utilization, etc., and proved to be much simpler and more flexible to be used in real situations.
  13. 강영식;함효준 153
    PDF
    This paper has proposed the modelling by simulation in order to evaluate the performance of process through discrete event simulation using SIMAN language in flexible manufacturing systems. The production system is assumed to be a job shop type of system under the batch production of discrete products. In this paper, the input data is the workstation(process) time, the number of workstation(process), a probability distribution, the number of simulation runs. Also, transient period is considered. In the case study, this paper deals with three products in real flexible manufacturing systems. Finally, a number of simulation runs were executed under different experimental conditions to obtain preliminary statistics on the following performance measures: operating rate of facility and average system operating rate, transient period, central processing unit, average system throughput, and average waiting time in queues.
  14. 이공섭;김영민 163
    PDF
    Due to the increasing of the number of cars and bad road conditions, car accidens are increasing every you in Korea. When a person meets a car accident, it is necessary for him to analyze and determine whether applying insurance or not, because standard discount rate and special increasing rate change with accident types and the amount of accident expenditure. When we consider insurance rate that includes more then ten elements, we need a decision making, In this paper, S insurance company investigated previous car causers in 1988, 1989, 1990 to 1996 with 600,000 real data. We investigate probability density functions and cumulative distribution functions for each year using ARENA software. We can apply the results of this study to various accidents that occur under uncertainty in our life. I hope that this paper contribute to strengthening competitive power of companies and developing new insurance rate systems in future.
  15. Goh, Hyun Woo 171
    PDF
    본 연구는 셀루라 제조방식을 갖고 있는 대기업에서의 예방보전에 관한 연구이다. 특히 24 시간운영하는 생산시스템을 갖고있으며, 보전요원이 충분한 업종이나 기업을 연구대상으로 하였다. 새로운 예방보전 절차를 제시하고 하나의 셀을 모델링하였다. 이 모델을 대상으로 시뮬레이션기법을 사용하여 기존에 절차와 비교분석하였다.
  16. 나윤균 179
    PDF
    A solution procedure to minimize total carousel related costs has been developed under the carousel throughput rate and total storage capacity requirements. The carousel related costs include carousel facility costs which are proportional to the number of carousels and carousel operating costs which are directly related to the moving distances of carousels. The number of carousels is dependent upon the size of a carousel and the moving distances are determined by the size of a carousel, storage item assignment to each carousel, and the item positions in a carousel. When the storage/retrieval requirements for each storage item is equal, an optimal algorithm has been developed. When the storage/retrieval requirements is unequal, a heuristic solution procedure has been developed because of the complexity of the problem.
  17. 이재일;신용백 185
    PDF
    In this paper, research and applications of a knowledge-base system in scheduling are review. The method is based on the problem-solving techniques developed in artificial intelligent. The object of this paper is to enable the re-time rescheduling under dynamic environments. Developed to KBS(Knowledge-Based Scheduling) system in this paper, will based on expert system, and applicate to requirement of users effectively.
  18. 민병도;임석철 197
    PDF
    Manufacturers can meet the due dates of orders by using overtime, in which case, additional cost incurs for the amount of overtime. Although many studies have been reported on scheduling, only a few papers are founds on production scheduling using overtime. We consider the problem of production scheduling using overtime on a single machine, in which each job has a given due-date, a constant processing time. We assume that the daily overtime does not exceed the daily regular operation time. The objectives is to minimize the total overtimes, while meeting all due dates. We first present a mathematical model, and then suggest a heuristic algorithm for the problem.
  19. 김홍준;송서일 207
    PDF
    This paper deals with a comparison between Taguchi's accumulation analysis method and Nair test on the ordered categorical data from an industrial experiment for quality improvement. a result of Taguchi's accumulation analysis method is shown to have reasonable power for detecting location effects, while Nair test identifies the location and dispersion effects separately, Accordingly, Taguchi's accumulation analysis needs to develop methods for detecting dispersion effects as well as location effects. In addition this paper rewmmends models for analyzing ordered categorical data, for examples, the cumulative legit model, mean response model etc Successively simple, reasonable methods should be introduced more likely to be used by the practitioners.
  20. 김명식;유병우 217
    PDF
    There are six perspectives of fit in strategy research, each implying distinct theoretical meaning and requiring the use of specific analytical schemes. But there is a few literature of the perspective in the discipline of Organizational Decision-Making and DSS. This study is a prior research which objective is to investigate the perspective of fit emprically in the discipline. The data were collected throughout the sampled business firms with premade questionaire and analysis were conducted with correlation analysis, regression, ANOVA and so forth. The research finding is that both predictors, one of which can be the moderator, influence the performance, and that the joint-effect of them influence the performance. Thus,'Fit as Moderation' would be suggested to be a proper model for the research in the discipline of Organizational Decision-Making and Decision Support Systems.
  21. 강지호;박명규 229
    PDF
    America automakers are requiring their suppliers to implement the QS-9000 based quality system, through they have had a little lukewarm attitude. Therefore, our auto parts makers need to cope with the QS-9000. This paper describes the interrelationship between ISO 9000 requirements and the QS-9000 requirements, the way to solve the problems step by step that originate from the QS-9000 quality system auditing and QS-9000 tendancy.
  22. 강영식 243
    PDF
    Forecasting the future values of an observed time series is an important problem in many areas, including economics, traffic engineering, production planning, sales forecasting, and stock control. The purpose of this paper is aimed to discover the more efficient forecasting model through the parameter estimation and residual analysis among the quantitative method such as Winters' exponential smoothing model, Box-Jenkins' model, and Kalman filtering model. The mean of the time series is assumed to be a linear combination of known functions. For a parameter estimation and residual analysis, Winters', Box-Jenkins' model use Statgrap and Timeslab software, and Kalman filtering utilizes Fortran language. Therefore, this paper can be used in real fields to obtain the most effective forecasting model.
  23. 이재하;박동진 257
    PDF
    Patents often serve as leading indicators of technological change. This patenting activity reflected R&D (Research & Development) of new technology. The purpose of this study is to set up a forecasting model that anticipate the number of domestic patent applications and the number of patents granted relating to R&D inputs (R&D expenditure, R&D manpower) at the level of three industrial sectors in Korea : electrical-electronic, machinery, chemical etc. In this study, forecasting models were used trend extrapolation and a set of regressions. Both Theil's inequality coefficient and MAE(Mean Absolute Error) were utilized to test the precision of predicted value. The patent data and the R&D data were based on Indicators of Industrial Technology data throught 1980 to 1996. The major results obtained in this study are as follows (1) The regression model is more useful for forecasting the trends of the number of patent applications and patents granted than the trend extrapolation method. (2) The variance of Theil's inequality is smaller in patent applications than in patent granted.
  24. 정현태;김제승 263
    PDF
    This paper presents a preventive maintenance model for determining the preventive replacement period of a system in which a failure rate is affected by the cumulative damage of fault and inspection. Especially, the failure rate function is considered to be a function of the cumulative damage of the fault and inspection time. Types of replacement considered are preventive replacement and failure replacement. Failure rate and expected cost function between replacement are derived. An optimal policy is obtained that minimizes the average cost per unit time for preventive replacement, failure replacement, inspection and repair.
  25. Kim, Hyun-Soo;Choi, Jin-Yeong 273
    PDF
    하며 최적의 합리적인 경영을 할 수 있도록 생산환경을 뒷받침할 수 있어야 한다. 이를 위해서는 생산시스템 전반에 걸친 정보 및 통신 기술의 중요성이 다른 어느것 보다도 더욱 더 강조되며, 그리고 중요한 역할을 담당해 나가고 있다. 본 연구에서는 이러한 최근의 환경을 나타낼 수 있는 제조환경에서 중추적인 역할을 담당하는 생산통제시스템에 사용되고있는 정보기술에 관하여 기존의 생산통제방식(납기일결정방식, 생산입력통제방식, 우선순위결정방식)에서 사용되고있는 정보의 내용을 분석하여 생산환경의 어느 부분의 어떤 정보가 생산통제시스템에서 중요한 역할을 담당할 수 있는지를 연구하고, 생산시스템 각 부분에서 반드시 고려되어야 하는 정보의 내용을 제시하고자 한다.
  26. 변화성;신용백 287
    PDF
    In existing technology planning, there is lack of considerations such as technology fusion, users' requirements of future, gap analysis between technology development and production, and industrialization process of development technology, that is, technology diffusion and technology transfer strategy. The most noticeable thing is that there is an obvious transition from supplier-centered to consumer-centered in the development of service or product because users' needs are getting a diverse and high level with the paradigm change of industry and society in the 21st century. So it is very important to design effectively a technology planning system under integration of R&D-production-sales system for satisfaction of customers' various choices. In this paper, we present considerations being required strategically in technology planning through analysis of mutual relationship and interface between technology planning, R&D and production system.
  27. 장익;윤창원;정병희 297
    PDF
    Exceptional Elements(E.E) are generally eliminated by a machine duplication or a subcontract in cellular manufacturing system. One of the advantages in FMS consists of machines capable of multi-processing. This paper presents a method that eliminates E.Es by tool duplication. First, we develop the exceptional operation similarity(EOS) by machine cell-operation incidence matrix and part-operation incidence matrix. The EOS indicates a similarity of unperformable operations in each part when two exceptional parts are assigned to a machine cell. Secondly, a mathematical model to minimize tool duplication is developed by the EOS. Finally, a heuristic algorithm is developed to reflect dynamic situation in process of elimination of exceptional elements by the EOS and the mathematical model. A numerical example is provided to illustrate the algorithm.
  28. 김성태 311
    PDF
    The development of Joint-Logistics System(JTS) for small/medium sized companies has been proposed for, particularity, Namdong Indusrial Complex located in Incheon. In this paper, JTS methodology is introduced and characterized in terms joint-control transportation, material handling and storage and order receipt. This methodology, which is unprecedented in Korea, has been considerably investigated and developed to implement a feasible model in Japan. A number of successful cases in Japanese companies are also presented to show how it works.
  29. 양성환 323
    PDF
    This study evaluated the compression force at the L5/S1 disc using EMG(Electromyography). EMG signals were analyzed under the condition of fixed vertical factor (20Cm∼80Cm), two horizontal factors (35Cm, 55Cm), and two weight factors (10Kg, 25Kg) 2 times per minute for each posture. Also, the result was compared with the compression force of each posture which computated by the equation of NIOSH(National Institute for Occupational Safety and Health) guide to manual lifting(1991). The experimental result show that EMG signals have more an effect on the Weight than the Horizontal factors. Also, there are not significant differences on the analysis result of EMG signals between Health members and not, because the body buildings which doing Health members are not enhanced the motor unit due to the MMH(Manual Material Handing).
  30. 최봉욱;김광섭 333
    PDF
    The purpose of this paper is to compare the manufacturing process with random covariate using multiple comparison procedure. The methodology that compares each manufacturing process by inspecting the number of nonconforming items out of k-treatment, has serveral limitations and problems according to the method and contect of the analysis. The proper way of analysis, therefore, could be obtained by the multiple comparison procedure of simultaneous confidence region of variance components. Effections that affect a manufactuing process may be predictive of responce to treatments are called covariates. In the study of comparing several treatments, prsense of covariate may bias the estimates of treatment effects.
  31. 안관영 343
    PDF
    Many empiric research findings have supported that the characteristics and strength of Organization Culture(OC) is closely related with organizational performance(absenteeism, job satisfaction, cohesiveness and turnover etc.). The first purpose of this study is to review the relationship between OC and turnover as a performance factor, and the second and primary purpose is to test the moderating effects of personal factors(sex, educational career, rank, occupation, marital status, job switching, age, company tenure and job tenure) between OC and turnover. For the analytical purpose of this article, OC type is categorized as Maintainable Culture(MC), Affiliation Culture(AC), Progressive Culture(PC) and Rational Culture(RC) based on Quinn(1985). The empirical results are as followings: Moderating effects are found in sex(with MC and RC), educational career(with MC, PC and RC), job switching(with MC and RC).
  32. Kim, Yon Soo;Chung, Young Bae 357
    PDF
    본 연구에서는 의학분야의 생존분석에서 적용되어 왔던 Cox의 비례위험모형을 신뢰성예측 에 적용할 때의 분석절차 및 그에 따른 소프트웨어를 다룬다. 이 비례 위험모형은 신뢰성공학 분야에 적용될 경우 많은 잠재력을 가지고 있으나, 그 분야에 적용된 경우가 많지 않고, 이미 적용된 사례들도 잘못 적용되어 왔다는 지적이 많은 실정이다. 본 연구에서는 시스템 , 서브시스템, 부품수준에서의 각 라이프사이클을 거치며 얻어진 수명데이타를 분석하여 신뢰도를 예측할 수 있는 모형을 설정하고, 그에 따른 소프트웨어를 다루며, 이 방법의 개관, 장단점, 주의점등을 고찰한다.
  33. Won, You-Dong 369
    PDF
    제조셀에서의 기계배치 문제는 매우 중요한 문제 중의 하나이다. 제조셀에서의 기계매치 형태는 크게 선형배치 방법과 네트워크형배치 방법의 두 가지가 있다. 본 논문에서는 선형배치 방법에 대하여 검토한다. 선형배치를 위한 가장 일반적인 방법은 to/from 비율에 의한 방법이다. 본 논문에서는 최소역흐름모형을 제시하여 to/from 비율에 의한 방법과 비교한다. 비교 결과 최소역흐름모형에 의한 선형기계배치의 경우가 to/from 비율에 의한 방법보다 총역흐름 이동거리를 상당히 감소시키는 것으로 나타났다.
  34. 김영균;유정모;정종식;최동순;배상윤 377
    PDF
    We consider the characterized curriculum of industrial engineering for training the excellent technician. We classified many kinds of jobs in the industry and information society and compared them with the curriculums of 13 junior colleges sampled randomly. Also we inquired the degree of relation of the technique qualification for graduates from industrial engineering to the current major subjects. For fostering the cultured individuals the community demands, we amended and looked into the current liberal arts course to supplement it. We analyzed the opinions of students, professors and experts from various circles through questionnaires, and then we set up the direction and the priority order for developing the curriculum for training the technician. According to the analyzed results, we presented the curriculum centering around customers and demanders and introduced it in detail. We are going to utilize developed curriculum, teaching methods by computers and practice methods step by step, and make expansion to industrial engineering of other colleges. Then we are planning to apply to the reeducation for graduates and the social education that contains the industrial human resources and the ordinary persons.
  35. 김재중;김원중 393
    PDF
    This study is concerned with reliability technology. In order to achieve the quality level of items for consumer's satisfaction, tests for the item's reliability are essential. This article deals with a method and real field application to plan reliability testing. Especially the environmental conditions and methods such as screening test for electronic components will be shown. As well, we will explore methods and field applications with respect to mechanic destructive tests and non destructive tests.
  36. Sungwoon Choi 401
    PDF
    본 연구는 우선 QS 9000의 배경, 구조 및 인증에 따른 혜택과 적용 사례를 알아보고 ISO 9000과 적용, 내용, 문체, 접근법, 평가과정, 용어 및 요건 면에서 구조적 차이를 비교·분석 ·요약하며, 또한 TE supplement 및 APQP/CP의 역할에 관해 조사한다. 끝으로 QS 9000의 주요 도구인 QFD, SPC, 공정능력 지수, MSA 등의 개선기법과 적용방법 등을 소개한다.
  37. 김재붕;양시영 425
    PDF
    In recent years, a scholars and a managers in business have taken a more interest on the effects of corporate culture on the organization effectiveness. The corporate culture has been recognized as one of the way to promote the organization performance and cope with the changes of the business environment. Edgar H. Shein defins the corporate culture as the that the pattern of basic assumptions that a given group has invented, discovered or developed in learning to cope with its problems of external adaptation and internal integration. The organization effectiveness is differently defined as the job satisfaction, job involvement, organizational commitment, organizational performance etc. The business culture help the employee (1) understand the values, the tradition, and the different management systems(decision-making basis, promotion, reward, behavior etc.) of the company, (2) make the performance-oriented decison and doings. Consequently, the excellent corporate culture would improve the organizational effectiveness. The purpose of this study is (1) to examine theoretically the content on the corporate culture and the organizational effectiveness, (2) to suggest the direction of the corporate culture management for both the management md the scholars.
  38. 이공섭 447
    PDF
    Customer satisfaction is one of the major issues in current marketing research. Among many studies on this issue, the best known is the determinants of customer satisfaction. This study is focused the involvement as a moderator of customer satisfaction. The data were collected from 113 students who have an experience using or buying the products and services. The present study found that the customer satisfaction has a relation with the following major characteristics. These are: 1) The direct effect of expectation on the customer satisfaction is significant in case of high involvement service. 2) The direct effect of performance has a difference between high involvement and low involvement. 3) And the direct effect of disconfirmation on the customer satisfaction is significantly different from the levels of involvement.
  39. 유승동;박범 463
    PDF
    In this paper, driver's judgements for the priorities of vehicle devices were studied to establish the standard of design of inside devices. The differences within drivers who have different careers were also studied. For this study, two experiments were conducted. First experiment was peformed in terms of total devices in the vehicle cockpit, and second was peformed in terms of the visual devices that these were the source of visual information. These experiments were analyzed using AHP (Analytic Hierarchy Process) method. The result showed the priorities of devices and little relationship between the career and the judgement. Especially, it was shown that the novice tended to depend on the information from visual devices.
  40. 강경식;나승훈;정영득;박재현 475
    PDF
    Industrial safety management program consists of three part which is education, technology and control. The effectiveness of industrial safety control program rely on the ability of controlling hardware system, technology and software, training and management. How to design and develop the sharing machine fault and safety diagnosis system using expert system technique is presented on this paper.
  41. 박동진;황인극 485
    PDF
    To develop an Enterprise Data Model in Information Strategy Planning, it is essential that we first decide on the critical entities that need to be consistently managed in the enterprise. Identifying entities is a very crucial decision that has much influence on the subsequent phases in Information Engineering. Nevertheless, it is very subjective and usually depends on a decision makers experience and his/her own knowledge. In this paper, we propose a decision support system called CB*IMSS, which employs Case-Based Reasoning as the problem solution technique. By retrieving, analyzing and adapting some similar previous cases with a decision makers enterprise situations, this system can help them identify and decide the critical entities required for successful performance of the ISP.
  42. 장성국;강신한 497
    PDF
    In this paper described is the software developed to calculate the physical properties of arbitrary section shape. The software consists of arbitrary section display module(ASDM) and section property calculation module(SPCM). ASDM defines and displays the shape of arbitrary section and SPCM calculates its properties such as area, centroid, moment of inertia, torsional constant, etc.. In many cases, calculation of section properties is not easy because user has to define the vertex coordinates which are difficult to do so in the case of arbitrary section. In the developed software, however, since user is asked to define only points of central lines and thickness of arbitrary section, the calculattion task of arbitrary section is very effective.