권호 표지

산업경영시스템학회지 (Journal of Korean Society of Industrial and Systems Engineering) (Journal of Korean Society of Industrial and Systems Engineering)

한국산업경영시스템학회 (Society of Korea Industrial and System Engineering)

  • 계간
  • /
  • 2005-0461(pISSN)
  • /
  • 2287-7975(eISSN)

과학기술표준분류

  • 경제/경영 ＞ 경영전략/윤리

Aim & Scope

As the flagship journal of the Society of Korea Industrial and Systems Engineering, Journal of Society of Korea Industrial and Systems Engineering launched in 1978 publishes original high-quality papers on a wide range of topics of interest to industrial engineers who want to remain current with the state-of-the-art technologies. It aims to foster the engineering and business administration community by publishing papers with a strong methodological focus motivated by real problems that impact engineering practice and research. It is composed of various focus issues: design and manufacturing, operations engineering and analysis, quality and reliability engineering, intelligent information systems, scheduling and logistics and business administration. The journal published quarterly in March, June, September and December each year. The official title of the journal is 'Journal of Society of Korea Industrial and Systems Engineering' and the abbreviated title is 'J. Soc. Korea Ind. Syst. Eng.'. All submitted manuscripts are peer-reviewed by three reviewers. The text may be written in Korean or English. The abstract, acknowledgement, and references should be written in English. Some, or all, of the articles in this journal are indexed in Korea Citation Index (KCI). Manuscripts should be sent to the editorial office by the website, 'http://ksie.ne.kr' that is the URL address of the journal where full text is available. This journal was supported by the Korean Federation of Science and Technology Societies(KOFST) Grant funded by the Korean Government.

http://ksie.or.kr/run/thesis/thesis.php?bid=thesis KSCI KCI

제23권56호

  1. Jun Hong Kim 1
    PDF
    We present in this paper an optimal stocking policy for a repairable inventory system under reliability improvement. For this purpose we illustrate commercial flight lines with a large number of planes. This model is supported by a central repair facility. For modeling the nonstationary M/M/s system we implemented SIMAN for computing the time dependent number of units in the repair facility with any number of units. In this model we provide the required inventory level at each location. 1y month. for various levels of associated stock-out risk.
  2. Lee, Dong Hoon;Lee, Byung Gun;Joo, Cheol Min;Lee, Woon Sik 9
    PDF
    This paper considers the problem of two-machine, M-parallel flow shop scheduling to minimize makespan, and proposes a series of heuristic algorithms and a branch and bound algorithm. Two processing times of each job at two machines on each line are identical on any line. Since each flow-shop line consists of two machines, Johnson's sequence is optimal for each flow-shop line. Heuristic algorithms are developed in this paper by combining a "list scheduling" method and a "local search with global evaluation" method. Numerical experiments show that the proposed heuristics can efficiently give optimal or near-optimal schedules with high accuracy. with high accuracy.
  3. Kim, Chang-Ouk 19
    PDF
    Impact of business process re-engineering requires the fundamental rethinking of how information systems are analyzed and designed. It is no longer sufficient to establish a monolithic system for fixed business environments. Information systems must be adaptive in nature. This demand is also applied in production domain. Enabling concept for the adaptive information system is reusability. This paper presents a new object-oriented analysis process for creating such reusable software components in production domain, especially for production planning and scheduling. Our process called MeCOMA is based on three meta-models: physical object meta-model, data object meta-model, and activity object meta-model. After the three meta-models are extended independently for a given production system, they are collaboratively integrated on the basis of integration pattern. The main advantages of MeCOMA are (1) to reduce software development time and (2) to consistently build reusable production software components.
  4. Leem, Young-Moon 35
    PDF
    In order to obtain rigorous systems analysis and design, it is essential to understand accurate information flow in the system. For the effective capturing of accurate information flow in a system, it Is vital to control information flow in the system. Also, information and information flow have to be simplified as a deliverable form. This paper presents partitioning and conveyance technique based on the application of situation theory. First, historical background of situation theory will be given. Then necessary conditions and definitions will be provided. Lastly, this paper provides specific technique with example. This introduced technique will be a powerful tool for sharing timely and relevant information in a complex manufacturing system that can be used continuously and efficiently throughout systems operation.
  5. Kim, Tae-Kwang;Kim, Chol-Hong 45
    PDF
    A laboratory experiment was conducted to investigate the effects of body posture and of different types of common non-powered hand tools on maximum volitional torque exertion capabilities of Korean. Fifteen males and 15 females were participated in the experiment. Each subject exerted maximum volitional torque in 15 different body postures while using five different common non-powered hand tools. Results of the data analysis showed that, for both males and females, the magnitude of torque exertion is significantly affected by the type of tool and posture. Also the result indicated that females exerted only about 51.5% of torque when compared to that of males. This result is different with the general findings in the field of ergonomics that the muscular strength of female is usually 65% to 75% of male. It suggests that application of same profile of muscular strength of female as in the western population should be carefully considered in oriental countries since females in this region may possess less physical capability compare to that of western females in terms of percentage muscular strength of males. Profiles of maximum torque capabilities of Koreans are provided.
  6. Hwang, Inkeuk;Park, Kongjin 55
    PDF
    There is more than a single quality characteristic and they are often of varying or mixed target types. The purpose of this paper is to develop general strategies for solving the multiple response robust design problem. The desirability function provides an important tool to solve problems that have different types of target since the desirability values all the range between zero and one. Several combinations of arithmetic averages, geometric averages, and standard deviations are used in the various strategies to find the best design point.
  7. Kuk, Kang-Hur;Park, Dong-Hyun 65
    PDF
    Industrial accidents have been consistently increased in terms of medical costs, lost work days, and incidence rates every year in Korea. Since the infrastructure of the industry changed shifts rapidly from 1980s in the developing countries such as South Korea, the nature and magnitude of the industrial accidents have also undergone a major shift. The situation is especially severe in small-to-medium sized industry(SMI). This article reports the development of a systematic evaluation system of risk factors specifically for the SMIs. The new approach introduced by this article is geared to the systematic identification and evaluation of the injuries from power press machines using the Analytic Hierarchy Process with the key evaluation data generated and evaluated by the employees on site. A total of 21 companies was studied and surveyed using the hierarchical structures of the cause-effect relationship of the mechanical injuries and their countermeasures. For the relative weighting of each risk factor, separate questionnaire survey was conducted for the selected workers from each company who had worked for more than 10 years in press work. Most participants (48 out of 62) replied that human attributes were the most significant factors for mechanical injuries fellowed by administration, machine, and work environment factors. The result also showed that the self-motivated risk assessment and safety enhancement activities would be an effective and efficient way of managing the risk factors in the SMIs.
  8. Kang, Hunku 83
    PDF
    This paper presents a study on control schemes for gradual increases (drifts) in a process variance. A new control chart, the Drifting Variance Control Chart (DVCC) is designed using Likelihood Ratio Test (LRT), and the ARL performance of the chart is evaluated for different subgroup sizes. The performance of this chart is then compared to some of the popular control schemes for the process dispersion, like the Shewhart S$^2$chart, the CUSUM chart and the EWMA chart. Results are presented and discussed. Also included is a sensitivity analysis that investigates how the DVCC performs when applied to a stepped change in process variance.
  9. Kim, Dae-Sik;Kang, Kyong-Sik 93
    PDF
    Today, the number of automated machine has rapidly increased in industrial workplaces. Nevertheless, workers are often required to handle materials manually. Technical information for using the revised NIOSH lifting equation to evaluate a variety of two - handed Manual Material Handling (MMH) tasks was investigated. The NIOSH suggested the Lifting Index that provides a relative estimate of the level of physical stress associated with a particular manual lifting task. To measure operator's workload in lifting task, Lifting Index Simulator(LIS) was developed based upon the revised NIOSH lifting equation in this study. The purpose of this study was to develop LIS and use the NIOSH lifting equation in our workplace.