권호 표지

산업경영시스템학회지 (Journal of Korean Society of Industrial and Systems Engineering) (Journal of Korean Society of Industrial and Systems Engineering)

한국산업경영시스템학회 (Society of Korea Industrial and System Engineering)

  • 계간
  • /
  • 2005-0461(pISSN)
  • /
  • 2287-7975(eISSN)

과학기술표준분류

  • 경제/경영 ＞ 경영전략/윤리

Aim & Scope

As the flagship journal of the Society of Korea Industrial and Systems Engineering, Journal of Society of Korea Industrial and Systems Engineering launched in 1978 publishes original high-quality papers on a wide range of topics of interest to industrial engineers who want to remain current with the state-of-the-art technologies. It aims to foster the engineering and business administration community by publishing papers with a strong methodological focus motivated by real problems that impact engineering practice and research. It is composed of various focus issues: design and manufacturing, operations engineering and analysis, quality and reliability engineering, intelligent information systems, scheduling and logistics and business administration. The journal published quarterly in March, June, September and December each year. The official title of the journal is 'Journal of Society of Korea Industrial and Systems Engineering' and the abbreviated title is 'J. Soc. Korea Ind. Syst. Eng.'. All submitted manuscripts are peer-reviewed by three reviewers. The text may be written in Korean or English. The abstract, acknowledgement, and references should be written in English. Some, or all, of the articles in this journal are indexed in Korea Citation Index (KCI). Manuscripts should be sent to the editorial office by the website, 'http://ksie.ne.kr' that is the URL address of the journal where full text is available. This journal was supported by the Korean Federation of Science and Technology Societies(KOFST) Grant funded by the Korean Government.

http://ksie.or.kr/run/thesis/thesis.php?bid=thesis KSCI KCI

제18권36호

  1. 홍성일;이종권;남현우 1
    PDF
    Manual lifting, as a part of manual materials handling activities, is recognized by authorities in the fields of occupational health and safety as a major hazards to industrial workers. In order to minimize the injuries caused by manual material handling activities as well as maximize job productivity, it is important to determine the maximum weights. This paper presents the optimal combination of membership functions according to the high lifting frequency and determines the safe maximum acceptable weights in manual lifting activities through the actual experiment.
  2. 곽효연;이상도 13
    PDF
    The phenomenal rate of growth of the design, implementation and use of interactive computer-based systems has been paralleled by an appreciation of the criticality of the human factor with regard to successful systems operation. As the pace of technological innovation quickens, and the design of user interfaces involves more complex interaction techniques, user frustration, confusion, degraded human performance, and an unwillingness on the part of users In perform interaction tasks were potential outcomes. Consequently, the important of user-centered interfaces design and use is increasing. Usability-based systems improve user acceptance and satisfaction with the systems
  3. Han, Sang Duck;Lee, JongChul;Lee, Jong Seok;Yang, DaeYong;Cho, Young Jin;Kim, Hyung Jin 23
    PDF
    생활용품을 포함한 제조산업에 관계되는 환경오염 문제가 심각한 국내문제로 제시되어 왔으며, 제혁산업은 심각한 환경문제를 야기 시키고 있다. 본 연구는 Bio-tech 피혁가공제로 Lupin LE-10 을 개발하여 탈모공정에 적용하고자 하며, 화학적 탈모방법과 비교를 통하여 Lupin LE-10 탈모 방법의 여러 가지 장점의 검토를 하고자 한다. 따라서, 본 연구는 개발한 Bio-tech 피혁가공제를 효해공정과 수적공정에 적용하여 Lupin LE-10의 유용성과 제혁산업으로부터 야기하는 환경문제의 개선, 가죽의 수율과 물성증진에 기여하고자 한다.
  4. 심준형;이근희;오형술 31
    PDF
    This study reflected sensitivity cognition in using color and evaluated the performance in task regarded GUI environment. Largely, three experiments were conducted. First, the searching time in text environment was compared with the searching time in color environment. Second, to know relationship of hue, saturation, lightness which are factors of color, and searching time, the searching time was measured using two-way ANOVA with interaction with three independent variables: hue, saturation, and distance. Third, sensitivity cognition about color was investigated and the performance of searching task was analyzed in the environment designed by color regarded sensitivity cognition. According to statistical results, the average searching time was decreased about 50.31% in color environment. The searching time was significant among the difference of hue and saturation. For the factor of color, the more the ratio of green and red was increased, the more searching time was decreased. The more the ratio of gray was increased, the more searching time was increased. And the searching time was developed in the environment designed by color regarded sensitivity. The purpose of this study is the presentation of sensitivity realization method and verification in the reflection and application of sensitivity to the industrial environment and design.
  5. 이근부 41
    PDF
    This study present a systematic and more economical anthropometric technique to acquire 3-D anthropometric data by the use of moire interferometry, image processing and computer vision techniques. An experiment was performed to measure in anthopometric variables (head and face), such as head length, head breath, length of ear to top of head, contained face areas, etc. We took fourty-five subjects with wide range of ages(18 years to 33 years old). The face area was calculated based on contour information. The results were then compared with plaster bandage methods. It turned out that the proposed method had 90.85% consistancy.
  6. 정범진;백승렬;김기범;박범 49
    PDF
    The vehicle navigation system is developed for helping driver to retrieve driving information more easily and fastly. Navigation System informs driver many pieces of driving information - roadway structure and system, on-line traffic condition, the position of vehicle, route guidance, destination and other information service. As the style of information is diverse and the amount of information is large, driver may have mental and visual overload. The display of information can disturb the driver's attention and this can cause accidents. This state is caused by the defect of human-machine interactions. When the navigation system is designed, human factors - cognitive, judgment, operating - must be considered. The display style must be designed simply and easily, not to be obstacle of human -machine interface. In this study, outside-in view display style and inside-out view display style are compared each other. Two factors are measured. One is cognitive factor-time of cognition on information that is displayed by screen display, cognition error rate. The other is image of screen display - subject's feeling about several styles of display, degree of subject's preference. The prototype of roadway is four kinds - Cross, T-cross, Y-cross and O-cross. Roadway display for test is taken from paper maps. Traffic condition display style, vehicle position display style and route guidance display style are taken from current display style. Traffic condition display style is symbol. Vehicle position display style and route guidance display style are described as color and symbol. The test on screen display is implemented doing given tasks. Then the test is analyzed statistically, The result of test analysis gives the guideline to the designer for the map display of the vehicle navigation system.
  7. 이재훈;이동형 61
    PDF
    The diagnosis has an very important role in curing dementia. But there was not the effective method to diagnose it until now. In this paper we analyzed the EEG in Alzheimer's disease and normal control groups to differentiated them by nonlinear parameter such as the correlation dimension. And we propose the nonlinear analysis of EEG in Alzheimer's disease as a useful tool of early diagnosis of it.
  8. 정성재;이근희;오형술 71
    PDF
    The readability and the visuability are very significant when the letters or figures are displayed as static visual information. Not only is the beauty of the body type character(small letters) important but the display type character(large letters) should also be read easily, quickly and precisely. The issue regarding the readability in terms of perception of information has been raised continuously for all kinds of small signage and billboard, etc., which are written in display type within our everyday life. Among the various kinds of small signage and billboards the car licence plate is well known. Among all the possible factors that would have made an impact on the readability of licence plate, this paper focused on the effects of arrangement of character(letters and figures) and contrast of colors for the readability of licence plate using the within-subject analysis. The statistical analysis results in error reading rate, the character arrangement were significant but the color contrast(green/white, white/green, blue/white, white/blue, black/yellow) was not, No interaction was found.
  9. Bae, Ki Woong 83
    PDF
    The objective of this paper is to develop ail algorithm to update probabilities in influence diagrams. Pearl has designed the method of conditioning. This paper applies his algorithm for probability updates by selecting a loop-outset for tile diagram and instantiating these loop-outset nodes. It is discussed the conditions that need to be satisfied by the selected nodes. And a heuristic algorithm is presented for finding a loop-outset that satisfies these conditions.
  10. 이강우;이꾸따세이조 93
    PDF
    This paper des with an economic production quantity model with partial backorders for the situation in which production lead time is deterministic and demand during lead time follows a continuous distribution. In the model, an objective function is formulated In minimize an average annual inventory cost. And then the procedure of iterative solution method for the model is developed to find both production reorder point and production quantity. Finally, sensitivity analysis for various partial backorder ratios and standard deviations of demand during production lead time are presented.
  11. 오명진;김진홍 105
    PDF
    This paper presents that model 1 is to show an approach to determining unidirection or bidirection of the optimal flow path design, model 2 is to show the design of an AGV can determine the minimum number of required vehicles. Our purposes of this article are that first, it is easy to see that computationlly advanced efficient procedure with some pairwises of comparision, zero-one integer and northwest rule by using, second, to determine the minimum number of vehicles in the layout for manufacturing facility, we used a coefficient ratio with moved numbers of loaded & unloaded vehicles between stations and available time of AGV's capacity for per shift per vehicle. Example is presented to demonstrate the approach.
  12. 김지승 113
    PDF
    Much of the past work regarding repairable item stockage has concentrated on the development of models and policies for systems in steady state. However, there are important situations in which the transient behavior is most important. A dramatic example of this is the potential dynamic behavior exhibited by demands and service in the deployment of an Air Force squadron at the onset of a conflict. The purpose of this paper is to derive some probability distributions necessary for providing an integrated approach for a multi-echelon inventory system with nonstationary demands and service rates.
  13. 조남호 121
    PDF
    The purpose of a business's existence is to make profit. The objective of business can be attained through the most profitable activities such as the improvement of productivity, quality and the reduction of the manufacturing cost. In order to produce the goods with above said goal, it can be achieved by inducing and improving the manufacturing process. In this viewpoint, We'd like to develope an algorithm for improving productivity, quality and cutting the manufacturing cost under the limitation of the resources. This paper showed a practical method which gradually improves three factors [productivity, quality and cost-down] by calculating the effective value of single and multi process mutually.
  14. 김용범;오충환 133
    PDF
    One of the problems brought up in the effective execution of genetic algorithms is that if they come under any influences according as the population size is large or small. In the case of small population size the opportunities of premature convergence are increased when the greatly powerful or no good individual is generated during search of the solution space. And searching the solution space in the case of large population size, the difficulties under the execution cause to searching all for one by one individual in every generation applied is limited, this gives the many interruptions to the convergence of final solution. Now this paper gives a suggestion to set up the adaptive population size which could compute the more correct solution and simplify the development of computation performance.
  15. 홍진원;김재련 143
    PDF
    This paper determines the allocation of computers and data files to minimize the sum of processing and communication costs which occur in processing jobs at each node. The problem of optimally configuring a distributed computer system belongs to the class of NP-Complete problems and the object function of this paper is nonlinear function and is hard to solve. This paper seeks the solution of distributed processing system by Tabu Search. Firstly, it presents the method of generating the starting solution proper to the distributed processing system. Secondly, it develops the method of searching neighborhood solutions. Finally, it determines the Tabu restriction appropriate to the distributed processing system. According to the experimental results, this algorithm solves a sized problems in reasonable time and is effective in the convergence of the solution. The algorithm developed in this paper is also applicable to the general allocation problems of the distributed processing system.
  16. 김준홍 153
    PDF
    Finding shortest paths in networks is the fundamental problem in network theory and has numerous in Operations Research and related fields. The purpose of this study is to present a algorithm for solving the length of the shortest paths from a fixed node in a general network in which the arc distance can be arbitrary value. This algorithm has a worst computational bound of $n^3/4$ additions and $n^3/4$ comparisons, which is lower the worst computational bounds of other available algorithms.
  17. 이덕수;박노국;송문익 159
    PDF
    In order to get equipments or facilities the company evaluates the alternatives on the investment and makes a decision in terms of investment economy. Quite often, however, companies face difficulties in generating investment alternatives and evaluating the alternatives generated. This paper discusses the methods of investment evaluation and shows a case study in which a specific method is applied to a firm.
  18. 김창훈;윤덕균 167
    PDF
    The Dynamic programming method are developed for determining where to assign the inspection efforts in serial multi-stage production systems. The objective function is formulated to minimize the inspection and repairing costs. One of the major assumptions in this systems is that every assigned inspection stations should inspect the only items produced in manufacturing stages after the previous inspction station. The inspection stations can be assigned at every possible inspection stage after the manufacturing stages. Two type error is considered and screening inspection policy is assumed in this system and the defective items detected in tile inspection stations will be repaired or scraped by the defective types.
  19. 강경식;나승훈;김태호 175
    PDF
    Industrial safety management program can be divided three part that is education, technology, and management. The effectiveness of a industrial safety management program depends on the ability to manage hardware which is technology and software, education and management, In this research, it will be described that how to design and develop Computer Integrated Safety System and Computer Based Training System for Press operations which is how to integrated industrial safety program wi th production planning and control in order to control efficiently using personnel computer system.
  20. 김성태 183
    PDF
    When designing a warehouse, one has to recognize that the number of racks in a warehouse takes on only integer value in reality. The existing solution procedures based on noninteger values may result in poor outcomes for the design of a warehouse. This paper deals with the determination of the optimal integer for the number of racks that minimize the total material handling cost associated with the warehouse. An optimum search procedure is proposed here and a number of numerical examples are used to evaluate the efficiency of the proposed procedure.
  21. 임수경;오근태 193
    PDF
    The production management system software which can be applied In the medium and small companies is developed. Since the medium and small companies hesitate to install the computer system for production management owing to the lack of funds and the complexities of operation, the system is made to be used in PC and only requires minimum input data. This system is composed of interrelated modules for receive/order release, inventory management MRP, new product registration, document management and production scheduling. In this paper the architecture of the system, functions of each module, and information processing procedures of each funtion are discussed.
  22. 신용하;이근희 205
    PDF
    The trends of economic business environment have been changed to the ultimate competion, diverse market and need of new technology. To enforce the international competitive power, continuous technology innovation should be propelled. But the characteristics of small and medium company make it hard to get lead of market share. The industry of transportation and stevedoring machinery also have the same situation as small and medium company. This paper try to present the way of competitive power. The Strategic technology innovation for the industry of transportation and stevedoring machinery consists of product strategy, process design strategy, infra-structure strategy and R&D. There are benefits and shortcommings to get the competitive power for the industry of transportation and stevedoring machinery. Therefore the onclusion presented that capital for reverse engineering, export policy, human resource, thechnical cooperation with the institutions are required.
  23. 김학철;강경식;박상민 219
    PDF
    Even though Just-In-Time Production System is introduced to industry in order to strengthen competition, applying this production system to field is hard and some problems are occurred. On this study, the algorithm which become smoothed production, one of the prerequisite condition for implementing Just-In-Time, are developed. On the other word. it is possible to become smoothed production based on keeping Lot Production System. The possibility of establishing more stable smoothed production scheduling are proved on this study by comparing with previous researches.
  24. 이덕수;박노국;송문익 233
    PDF
    Many companies worldwide today are pursuing to make diversified and highly qualified products. Factory automation aims at maximizing profits through the lessened inventory and shortened delivery time, which will enable the company to become more responsive to market changes. This research analyzes the following feartures in the process of factory automation. first, the automation level according to the company class. second, productivity according to the automation level. third, the organization menber's interest in the automation. finally, the possible problems in factory automation.
  25. Sungwoon Choi 243
    PDF
    본 연구에서는 자동상관인 공정의 변화를 빠르게 탐지할 수 있는 Special-Cause CUSUM 관리도를 사용하여 다섯가지 시계열 모델에 대해 다음과 같은 연구를 수행한다. 첫째 ACF와 PACF로 파라미터에 따른 ARL의 변화를 쉽게 해석할 수 있는 방법과 둘째로 독립인 관측값에 적용하는 Hawkins(1992)의 ARL 간략계산법을 자동상관인 공정에서도 사용할 수 있는 기법을 제시하여 기존의 시뮬레이션을 이용한 ARL 계산법에 비해 빠르고도 정확한 값을 구한다. 끝으로 두가지 유형의 평균이동에 대한 ARL 변화를 각각 계산해 보아 그 효과를 비교분석 한다.
  26. 배홍석;이만웅;송서일 253
    PDF
    In parameter design, Taguchi's stated objective is to find the setting of product or process design parameters that minimize average quadratic loss-that is, the average squared deviation of the response from its target value. Yet in practice to choose the settings of design parameters he maximizeds a set of measures called signal-to-noise(SN) ratios. In general, Taguchi gave no justification for the use the SN ratios and no explanation of why the two-step procedure that he recommened will minimize average loss. The purpose of this study is comparing and analyzing of performance statistics by Leon et al(PerMIA), Box(Transformation theory), Vining & Myers(Dual Response Systems) and Taguchi(Signal-to-Noise ratios).
  27. 함효준 265
    PDF
    This paper is to analyze and provide some managerial requirements for the successful implementation of total productive maintenance system. It tries to identify determining factors for success and reasons for the failures of TPM, based on the research of a survey and an empirical study through the years in Korea. The findings are such that many companies have not been engaged in planning and control the maintenance cost and their maintenance activities are not organized systematically. However, many indicators show that the number of finns which try to introduce and implement TPM is getting increased. The successful implementation of TPM depends largely on how top management perceives TPM and how the firm responds In the changes of organization and of the role of workers to adapt this new concept of work. It is required that TPM is perceived as a means to achieve the firm's business objectives. It is recommended that each company constructs and develops its own model and procedures to drive the effort for TPM implementation.
  28. 정영배 275
    PDF
    In recent years there has been increasing interest in the issue of process centering in manufacturing process, The traditional process capability indices Cp, Cpk and Cpu are used to provide measure of process performance, but these indices do not represent the issue of process centering. A new measure of the process capability index Cpm is proposed that takes into account the proximity to the target value as well as the process variation when assessing process performance. However, Cpm only considers acceptance cost for deviation from target value within specification limits, do not includes economic consideration for rejected items. This paper proposes flexible process performance measures that considered quadratic loss function caused by quality deviation within specification limits, rejection cost associated with the disposition of rejected items, and inspection cost. In this model disposition of rejected items are considered under perfect corrective procedures and the absence of perfect corrective procedures.
  29. 김재중;김원중 287
    PDF
    This paper is concerned with cost analysis model in periodic maintenance policy. Generally periodic maintenance policy in which item is repaired periodic interval times. And in the article minimal repair is considered. Mimimal repair means that if a unit fails, unit is instantaneously restored to same hazard rate curve as before failure. In the paper periodic maintenance policy with minimal repair is as follows; Operating unit is periodically replaced in periodic maintenance time, if a failure occurs between minimal repair and periodic maintenance time, unit is replaced by a new item until tile periodic maintenance time comes. Also unit undergoes minimal repair at failures in minimal-repair-for-failure interval. Then total expected cost per unit time is calculated according to scale parameter of failure distribution. Maintenance cost factors are included operating, fixed, minimal repair, periodic maintenance and new item replacement cost. Numerical example is shown in which failure time of system has weibull distribution.
  30. 김홍준;양정문;송서일 297
    PDF
    An automatic transfer line consists of several stages(groups of stations) in series into one system by a common transfer mechanism and a common control system. In this system losses of the efficiency are evidenced in periods where a stage is forcod down- starved or blocked. The efficiency of an automatic transfer line can be improved by providing buffer storages between a stage or the length of line common senses there are several critical factors, system configurations relative position, and buffer capacity allocations in automatic transfer line are considered with a point of view production rates, average stock, and mean delay. The propose of this paper is to provide the robust designs by Taguchi method which improve the efficiency of four-stage transfer line.
  31. 박상필;김영세;박건우 307
    PDF
    Everyone knows that documents are very useful to obtain and transfer an information. Establishing a good document control system is difficult although it is important. In this point, document control is the base of the quality system. This paper provides possible implementation methods and achieving the method of good document control through analysis of code requirements. The best method is to provide a freedom to people.
  32. 김영세;박건우;박상필 315
    PDF
    Quality audit is one of tools to evaluate the effectiveness and compliance of quality system. Quality system will be improved through quality audit. This paper describes the considerations such as audit team, audit process, audit checklist and auditor's communication skills to perform effective quality audit. The result of quality audit depends on the auditees attitudes. Thus, the auditor's manner is very important to gain a good audit result.
  33. 정현석;이병근 323
    PDF
    The role of equipment maintenance in manufacturing becomes important. As a method of overcoming this problems, diagnostic expert system has been introduced. If such a system is, however, based on the troubleshooter's knowledge, many difficult cases are occured in the real process of diagnosis using that kind of system. This paper suggests to use the designer's knowledge for diagnosing the malfunctions of production equipments. To do that, a method of knowledge represen-tation is also proposed, which is based on the concept of boundary factors. In addition, the disorder propagation in considered. As a results, one can simplify the process of reasoning and inspection.
  34. 이성호 333
    PDF
    In Manufacturing using time-based strategies, as a competitive advantage, time is the equivalent of productivity, quality, innovation. In addition, time-based sourcing's impact on competiveness is not limited to cost control but also influences the performance of its adoption. This paper is to examine the relation between the level of time-recognition and supporting and performance of time-based sourcing by the empirical study.
  35. 이병욱;정수일 341
    PDF
    The AHP is a good methodology for the multicriterion decision-making process such as nuclear fuel cycle technology selection, which requires consideration of international circumstances, social factors, economic factors as well as technological factors. This paper presents the prioritization of technologies using AHP at back-end fuel cycle development strategy and it would be useful for the national nuclear development planners.
  36. 현창우 349
    PDF
    The purpose of the study was to estimate and analyze the rates of return to educational investment. The study was designed to estimate the social and private rates of return to educational investment by school level and sex in order to measure education's economic value with a viewpoint of human capital theory. The produced result of this study are as follows. The social rates of return to education turned out to be male high school 7.94%, male junior college 3.74%, male university 8.50% female high school 4.30%, female junior college 10.11%, female university 6.92%. The private rates of return to education turned out to be male high school 8.41%, male junior college 3.39%, male university 8.38%, female high school 7.90%, female junior college 10.34%, female university 7.33%, In order to measure economic value of educational investment, rates of return to education were compared with those to physical capital investment. Social rates of return to education turned out to be profitable for female junior college, while for private rates of return to education turned out to be profitable in all school levels except for male junior college.
  37. 김형준;황동섭 365
    PDF
    In recent years, there have been attempts to explain firms' capital structure based upon the agency theory which considers agency problems arising due to ownership structure. Agency theory starts from the coctractual relationship (explicit or implicit) between principals and agents. Since uncertainty exists in real world and information is distributed asymmetrically, there are conflicts between principals and agents. The objectives of this study are to analyze, based upon agency theory, factors which are expected to affect firms' capital structure and to test empirically the relevance of agency cost hypothesis about the determination of capital structure, For these purposes, this paper carried out multiple regression in order to examine whether the factors of agency costs affect significantly the determination of capital structure. The results of empirical analysis are summarrized as follows; First, insider-equity ration has been negatively correlated with capital structure. Second, growth opportunity variabless has been insignificant coefficients with capital structure.
  38. Kim, Yon-Soo;Park, Sang-Min 371
    PDF
    Modern combat (or commertial) aircraft systems consist of a large number of sophisticated and complex avionics/electronics subsystems. The US Air Force of Productivity, Reliability, Availability and Maintainability (PRAM) reports that 25 to 45 percent of aircraft system failures in the electronics or electromechanical area 〔Kachmar, 1985〕. It is an important issue to achive the required reliability and maintainability for avionics/electronics subsystems in order to guarantee the mission success during the life cycle in a timely and cost effective manner. The issuance of USAF Mil-A-87244, "Avionics/Electronic Integrity Program requirements," 1987 demands a new approach called "Avionics/Electronics Integrity Program" (AVIP). The objective of this paper is to give a tutorial presentation on the basic aspects of Avionics/Electronics Integrity efforts in relation to total quality management of avionics/electronics whose performance measures are expressed in terms of reliability, durability, and matainability.