본고의 내용은 다음과 같다. 1. 온도의 검출 1.1 열전대 1.2 방사온도계 2. 온도의 제어 2.1 지시계 2.2 검출기 2.3 조절기 2.4 조작단

본고의 내용은 다음과 같다. 1. 모델링 2. 해석방법 2.1 해석 방정식의 형성 2.2 해를 구하는 방법

When electronegative gas SF$_{6}$ is dissolved and charged with insulating oil, the effect caused in the process by electronegative characteristic is studied and also the pressure effect caused by electronegative SF$_{6}$ acting on the liquid-level is examined respectively. When inert gas Ar is used to find a pressure effect acting on the liquid-level, its effect on dielectric strength is considered in the experiment. With three kinds of impulse voltage different in the duration of wave front and wave tail, a brief experiment if carried out ot see the effects on the dielectric breakdown characteristic as the wave is changing; either if I$_{2}$ and SF$_{6}$ are added to the insulating oil, or if the oil pressure is increased by Ar the dielectric strength becomes great and the longer the duration of wave front is, the greater the increase of the breakdown voltage, because I$_{2}$ added by a small quantity brings about some hirderance in the formation of gas phase. Likewise, the greater the changed pressure is, the greater the incerase of the breakdown voltage. When SF$_{6}$ is charged, the electronegative characteristic is prevailing at the time of low balanced pressure, and the pressure effect at the time of high balanced pressure.ressure.

In most cases, simulation of induction machines under dynamic conditions have been based on two-phase models using constant circuit parameters. Squirrel cage induction machines with double rotor bars which are made for high starting torgue have lower rotor bars of sufficient depth they cannot be accurately represented by a constant rotor resistance under all operating condition. In this paper, the circuit of three-phase symmetrical induction machines is represented in two-axis model by tensor. A method for simulating three-phase squirrel cage induction machines in a dynamic conditions is presented, and the current distribution in double rotor bars is calculated under dynamic conditions.

New algorithms are derived for nonlinear programming problems which are characterized by their large variables and equality and inequality constraints. The algorithms are based upon the introduction of the Dependent-Variable-Elimination method, Independent-Variable-Reduction method, Optimally-Ordered-Triangular-Factorization method, Equality-Inequality-Sequential-Satisfaction method, etc. For a case study problem relating to the optimal determination of load flow in a 10-bus, 13-line sample power system, several approaches are undertaken, such as SUMT, Lagrange's Multiplier method, sequential applications of linear and quadratic programming method. For applying the linear programming method, the conventional simplex algorithm is modified to the large-system-oriented one by the introduction of the Two-Phase method and Variable-Upper-Bounding method, thus resulting in remarkable savings in memory requirements and computing time. The case study shows the validity and effectivity of the algorithms presented herein.