• Proceedings of the Korea Information Processing Society Conference
• /
• 2013.11a
• /
• pp.1506-1509
• /
• 2013

본 논문에서는 고성능 HEVC(High Efficiency Video Coding) 복호기 설계를 위한 효율적인 in-loop filter의 하드웨어 구조 설계에 대해 기술한다. in-loop filter는 deblocking filter와 SAO로 구성되며, 블록 단위 영상 압축 및 양자화 등에서 발생하는 정보의 손실을 보상하는 기술이다. 하지만 HEVC는 $64{\times}64$ 블록 크기까지 화소 단위 연산을 수행하기 때문에 높은 연산시간 및 연산량이 요구된다. 따라서 본 논문에서 제안하는 in-loop filter의 deblocking filter 모듈과 SAO 모듈은 최소 연산 단위인 $8{\times}8$ 블록 연산기로 구성하여 하드웨어 면적을 최소화하였다. 또한 SAO에서는 $8{\times}8$ 블록의 연산 결과를 내부레지스터에 저장하는 구조로 $64{\times}64$ 블록 크기를 지원하도록 설계하여 연산시간 및 연산량을 최소화 하였다. 제안하는 하드웨어 구조는 Verilog HDL로 설계하였으며, TSMC 칩 공정 180nm 셀 라이브러리로 합성한 결과 동작 주파수는 270MHz이고, 전체 게이트 수는 48.9k이다.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.12 no.2
• /
• pp.53-64
• /
• 2002

This paper describes a design of cryptographic processor that implements the AES (Advanced Encryption Standard) block cipher algorithm, "Rijndael". An iterative looping architecture using a single round block is adopted to minimize the hardware required. To achieve high throughput rate, a sub-pipeline stage is added by dividing the round function into two blocks, resulting that the second half of current round function and the first half of next round function are being simultaneously operated. The round block is implemented using 32-bit data path, so each sub-pipeline stage is executed for four clock cycles. The S-box, which is the dominant element of the round block in terms of required hardware resources, is designed using arithmetic circuit computing multiplicative inverse in GF($2^8$) rather than look-up table method, so that encryption and decryption can share the S-boxes. The round keys are generated by on-the-fly key scheduler. The crypto-processor designed in Verilog-HDL and synthesized using 0.25-$\mu\textrm{m}$ CMOS cell library consists of about 23,000 gates. Simulation results show that the critical path delay is about 8-ns and it can operate up to 120-MHz clock Sequency at 2.5-V supply. The designed core was verified using Xilinx FPGA board and test system.

• Journal of the Institute of Convergence Signal Processing
• /
• v.8 no.4
• /
• pp.237-243
• /
• 2007

In this paper, we propose the Real-time Dead-Pixel Detection and Compensation System for mobile camera and its hardware architecture. The CMOS image sensors as image input devices are becoming popular due to the demand for miniaturized, low-power and cost-effective imaging systems. However a conventional Dead-Pixel Detection Algorithm is disable to detect neighboring dead pixels and it degrades image quality by wrong detection and compensation. To detect dead pixels the proposed system is classifying dead pixels into Hot pixel and Cold pixel. Also, the proposed algorithm is processing line-detector and $5{\times}5$ window-detector consecutively. The line-detector and window-detector can search dead pixels by using one-dimensional(only horizontal) method in low frequency area and two-dimensional(vertical and diagonal) method in high frequency area, respectively. The experimental result shows that it can detect 99% of dead pixels. It was designed in Verilog hardware description language and total gate count is 23K using TSMC 0.25um ASIC library.

• Journal of Advanced Navigation Technology
• /
• v.24 no.2
• /
• pp.85-91
• /
• 2020

Recently, a multi-mode radar system was designed for efficient operation of unmanned aerial vehicles (UAVs) in various environments, which has the advantage of being able to integrate and utilize methods of the pulse Doppler (PD) radar and the frequency modulated continuous wave (FMCW) radar. For the range detection part of the multi-mode radar signal processor (RSP), the hardware structure using the FFT processor and the IFFT processor is required to be designed in a way that improves efficiency on the area side. In addition, given the radar application environment that requires a variety of distance resolutions, FFT processors need to support variable-length operations. In this paper, the FFT processor and IFFT processor in multi-mode RSP range estimation are designed and proposed as hardware for a single FFT processor that supports variable length operation of 16-1024 points. The proposed FFT processor designed in hardware description language (HDL) and can be implemented with 7,452 logic elements and 5,116 registers.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.2C
• /
• pp.150-159
• /
• 2002

This paper presents the convergence time, SER(Symbol Error Rate), MSE(Mean Square Error), hardware complexity and step-size(${\mu}$) about various LMS(Least Mean Square) algorithms in FS-DFE(Fractionally Spaced-Decision Feedback Equalize) for Cable Modem based on MCNS(Multimedia Cable Network System) DOCSIS(Data Over Cable Service Interface Specification) v1.0/v1.1 standards. We designed and simulated using ${SPW}^{TM}$ and synthesized using STD90 library through ${SYNOPSYS}^{TM}$. And also, we adopted the time-multiplexed multiplication and tap shared architecture in order to achieve the low hardware complexity. Simulation results show that DS-LMS algorithms[1][3] is the optimum solution about performace and hardware size. in high order QAM applications. Finally, we achieved area saving about 58% using DS-LMS algorithm compare with conventional equalizer architecture.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.44 no.12
• /
• pp.93-101
• /
• 2007

Small area and low power implementation are important requirements for various multimedia processing hardware, especially for mobile environment. This paper presents a hardware architecture of H.264/AVC Intra Prediction module aiming on small area and low power. A single arithmetic unit was shared and processed sequentially for all mode decisions and computations to predict an image frame. As a result, we could get smaller area and smaller memory size compared to other existing implementations. The proposed architecture was verified using the Altera Excalibur device, and the implemented hardware has been described in Verilog-HDL and synthesized on Samsung STD130 0.18um CMOS Standard Cell Library using Synopsys Design Compiler. The synthesis result was about 11.9K logic gates and 1078 byte internal SRAM and the maximum operating frequency was 107Mhz. It consumes 879,617 clocks to process one QCIF frame, which means it can process 121.5 QCIF$(176\times144)$ frames per second, therefore it shows that it can be used for real time H.264/AVC encoding of various multimedia applications.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.48 no.11
• /
• pp.27-33
• /
• 2011

Recently many display devices support the digital display interface as display market growth. DisplayPort is a next generation display interface at the PC, projector and high definition content applications in more widely used connection solution development. This paper implements multiple streams based on the behavior of the main link that is suitable for the display port v1.1a standard. The limit point of Displayport, interface between the Sink Device and Sink Device is also implemented. And two or more differential image data are enable to output the result through four Lanes stated in display port v1.1a, of two or more display devices without the addition of a separate Lane. The Multiple Video Streaming Controller is implemented with 6,222 ALUTs and 6,686 register, 999,424 of block memory bits synthesized using Quartus II at Altera Audio/Video Development board (Stratix II GX FPGA Chip).

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.43 no.7 s.349
• /
• pp.50-57
• /
• 2006

Low-density parity-check (LDPC) codes are recently emerged due to its excellent performance. However, the parity check (H) matrices of the previous works are not adequate for hardware implementation of encoders or decoders. This paper proposes a hybrid parity check matrix which is efficient in hardware implementation of both decoders and encoders. The hybrid H-matrices are constructed so that both the semi-random technique and the partly parallel structure can be applied to design encoders and decoders. Using the proposed methods, the implementation of encoders can become practical while keeping the hardware complexity of the partly parallel decoder structures. An encoder and a decoder are designed using Verilog-HDL and compared with the previous results.

• Journal of IKEEE
• /
• v.15 no.2
• /
• pp.113-121
• /
• 2011

This paper presents the design of a fast auxiliary channel bus for DisplayPort 1.2 interface. The fast auxiliary channel supports Manchester transactions at 1Mbps and fast auxiliary transactions at 780Mbps. The Manchester transaction is used for managing the main link and auxiliary channel and the fast auxiliary transaction is for data transfer via the auxiliary channel. Simplified serial bus architecture is proposed to be implemented in fast auxiliary channel. The fast auxiliary channel transmitter and receiver are implemented with 7,648 LUTs and 6,020 slice register synthesized in Xilinx Vertex4 FPGA and can be operated at 72MHz to support 720Mbps.

• Journal of Korea Multimedia Society
• /
• v.16 no.12
• /
• pp.1427-1438
• /
• 2013

We have developed a 128-bit stream cipher algorithm composed of the 5-stage pipeline, capable of real-time processing, confidentiality and integrity. The developed stream cipher is a stream cipher algorithm that makes the final 128-bit ciphers through a whitening process after making the ASR 277 bit and SHACAL-2 and applying them to the CFB mode. We have verified the hardware performance of the proposed stream cipher algorithm with Modelsim 6.5d and Quartus II 12.0, and the result shows that the hardware runs at 33.34Mhz(4.27Gbps) at worst case. According to the result, the new cipher algorithm has fully satisfied the speed requirement of wireless Internet and sensor networks, and DRM environment. Therefore, the proposed algorithm with satisfaction of both confidentiality and integrity provides a very useful ideas.