The focus of the current study was to investigate the physicochemical properties of a corn starch-sponge matrix prepared at a low concentration below gel forming by freeze-drying. The effect of variables(starch concentration, heating temperature, and heating hold time) on the physicochemical properties of the samples was analyzed by response-surface methodology. Regression models on the properties of samples such as hardness, springiness, and water solubility index(WSI) showed high correlation coefficients(r>0.95) and significant F values, but regression models for the other properties(swelling power, apparent viscosity, reducing sugar content, and digestibility) showed them to have relatively low significance. Sample hardness of sample showed the highest value at condition of $90^{\circ}C$ and 5%, whereas springiness was at a maximum at $130^{\circ}C$ and 5%. Also, at 1% of starch concentration, mechanical properties were greatly decreased as the relative humidity increased, compared with the 3% and 5%, especially in the hardness of samples. The WSI showed an increasing trend with heating temperature regardless of starch concentration. Overall, the physicochemical properties of freeze-dried corn starch-sponge matrix were influenced much more by starch concentration and heating temperature than by heating hold time. The results of this study show that the basic properties of freeze-dried corn starch-sponge matrix can be used for the specific food applications or as a functional material for its stability.
Analog-digital converter boards for use in personal computers have recently being improved markedly, many kinds of high speed(1 MHz - 10 MHz sampling rale) and over 12-bit vertical resolution A/D boards released. It can be applicable to high frequency magnetic measurements. In measurement of magnetic properties of high frequency, digitizing oscilloscope or trasient recorder are being used. but, those price are often expensive, we constructed PC controlled A-C B-H loop tracer that can measure Bs, Br, He, permeability and may be applied about 100 Hz - 20 kHz range. it use IBM PC compatible 1 M Sample/s, 12 bit A/D converter board with SSH(Simultaneous Sample and Hold).
본 논문에서 이식형 심장 박동 조율기를 위한 심전도 검출기와 아날로그-디지털 변환기(ADC)를 설계한다. 제안한 웨이블렛 심전도 검출기는 웨이블렛 필터 뱅크 구조의 웨이블렛 변조기, 웨이블렛 합성된 심전도 신호의 가설 검정을 통한 QRS 신호 검출기와 0-교차점을 이용한 잡음 검출기로 구성된다. 저전력 소모의 동작을 유지하며 보다 높은 검출 정확도를 갖는 심전도 검출기의 구현을 위해, 다중스케일 곱의 알고리즘과 적응형의 임계값을 갖는 알고리즘을 사용하였다. 또한 심전도 검출기의 입력단에 위치하는 저전력 Successive Approximation Register ADC의 구현을 위해, 신호 변환의 주기 중, 매우 짧은 시간 동안에만 동작하는 비교기와 수동 소자로 구성되는 Sample&Hold를 사용하였다. 제안한 회로는 표준 CMOS $0.35{\mu}m$ 공정을 사용하여 집적 및 제작되었고, 99.32%의 높은 검출 정확도와 3V의 전원 전압에서 $19.02{\mu}W$의 매우 낮은 전력 소모를 갖는 것을 실험을 통해 확인하였다.
이 논문에서는 혼성 신호 집적회로 상의 온칩 전원전압 잡음을 측정하는 회로에 대해 기술하였다. 온칩 상의 전원전압 잡음을 측정함으로서 잡음이 아날로그 회로에 미치는 영향을 확인하고 이를 보상하는 정보로도 사용할 수 있다. 이 회로는 동일하지만 독립적인 두 개의 채널로 구성되어 있다. 각 채널은 샘플 앤 홀드와 전압 제어 발진기를 포함한 주파수-디지털 변환 블록으로 구성되어 있다. 간단한 아날로그-디지털 변환 방법을 사용해서 시간 기준 전압 정보와 주파수 기준 전력 스펙트럼 밀도를 얻을 수 있다. 버퍼는 넓은 대역폭을 갖는 유닛 게인 버퍼로 동작하고, 전압 제어 발진기는 해상도를 높이기 위한 높은 증폭도를 가지고 있다. 이 회로는 0.18um CMOS 공정으로 설계되었으며 측정된 해상도는 2.06mV/count 이다. 전원잡음 측정회로는 15mW의 전력을 소모하며 $0.768mm^2$의 면적을 차지한다.
본 논문에서는 단일 폴리 공정을 기반으로 하여 8b 해상도로 200MHz의 고속 동작을 하기 위해 최적화된 시간 공유 서브레인징 ADC(Analog-to-Digital Converter)를 제안한다. 제안하는 ADC는 높은 정확도를 요구하는 하위 ADC에 이중 채널 구조를 적용하여 높은 샘플링 주파수를 보장하였고, 새로운 기준 전압 인가 방식을 적용하여 기준 전압의 빠른 정착 시간을 얻으면서 동시에 칩 면적을 크게 감소시켰다. 기준 전압을 생성하는 저항열에서는 선형성 및 속도 향상을 위해 기존의 인터메쉬드 구조를 보완한 새로운 저항열을 사용하였다. 8 비트 수준의 정밀도에서 면적 및 전력 소모를 최소화하기 위해 공통 드레인(common- drain) 증폭기 구조를 사용하여 샘플-앤-홀드 증폭기(Sample-and-Hold Amplifier:SHA)를 설계하였으며, 입력단에 스위치와 캐패시터로 구성된 동적 공통 모드 궤환 회로(Dynamic Common Mode Feedback Circuit)를 사용하여 SHA의 동적 동작 범위(dynamic range)를 증가시켰다. 동시에 상위 ADC와 하위 ADC간의 신호 처리를 단순화시키기 위해 상위 ADC에 새로운 인코딩 회로를 제안하였다.
본 논문에서는 고속 평판 디스플레이 응용을 위한 8b 200 MHz 0.18 um CMOS A/D 변환기 (Analog-to-Digital Converter:ADC)를 제안한다. 제안하는 A/D 변환기는 200 MHz의 샘플링 클럭 속도에서 샘플링 클럭 속도보다 더 높은 입력 대역폭을 얻기 위해서 개선된 bootstrapping 기법을 사용한다. Bootstrapping 기법이 적용된 샘플-앤-흘드 증폭기(Sample-and-Hold Amplifier. SHA)는 기존의 회로 보다 향상된 정확도를 가지며, 1.7 V의 전원 전압, 200 MHz의 샘플링 클럭, 500 MHz의 정현파 입력에서 SHA의 출력을 FFT(Fast Fourier Transform) 분석한 결과 7.2 비트의 유효 비트 수(effective number of bits)를 나타내었다. 또한 병합 캐패시터 스위칭 (Merged-Capacitor Switching:MCS) 기법을 사용하여 기존의 A/D 변환기에 사용되는 캐패시터의 숫자를 50 % 줄임으로써 샘플링 속도를 높임과 동시에 면적을 최소화하였다. 제안하는 40 변환기는 0.18 um n-well single-poly quad-metal CMOS 공정을 사용하여 모의 실험 되었으며, 1.7 V 전원 전압, 200 MHz의 샘플링 클럭에서 73 mW의 전력을 소모한다.
능동형 유기 발광 다이오드의 픽셀 노화를 보상하기 위한 문턱 전압 감지 회로가 제안된다. 제안된 문턱 전압 감지 회로는 샘플-홀드 회로와 10비트의 해상도를 가지는 단일 입력 축차 근사형 아날로그-디지털 변환기로 구성된다. 각 샘플-홀드 회로의 스케일 다운 변환기와 단일-차동 변환기를 가지는 가변 이득 증폭기를 제거하기 위해 단일 입력 축차 근사형 아날로그-디지털 변환기를 위한 중간 기준 전압 보정과 입력 범위 보정이 수행된다. 제안된 문턱 전압 감지 회로는 1.8V 공급 전압의 180nm CMOS 공정을 사용하여 설계된다. 단일 입력 축차 근사형 아날로그-디지털 변환기로의 유효 비트와 전력 소모는 각각 9.425비트와 2.83mW이다.
본 논문에서는 DC 유형의 에너지 하베스팅을 위한 저전력 MPPT 인터페이스 회로를 설계하였다. 제안된 회로는 크게 MPPT controller, bias generator, voltage detector로 구성된다. MPPT controller는 schmitt trigger로 구성된 MPG(MPPT Pulse Generator)와 에너지 유형(빛, 열)에 따라 동작하는 logic gate와 sample/hold 회로로 구성된다. Bias generator는 beta multiplier 구조를 적용하여 설계되었으며, voltage detector는 bulk-driven comparator와 2단 buffer를 이용하여 설계되었다. 제안된 회로는 $0.35{\mu}m$ CMOS 공정으로 설계하였다. 모의실험 결과 설계된 회로는 3V 이내의 입력전압에서 100nA보다 작은 전류를 소모하며, 최대 전력효율은 99.7%이다. 설계된 회로의 칩 면적은 $1151{\mu}m{\times}940{\mu}m$이다.
본 논문에서는 CSH(Current Sample-and-Hold)와 CCMP(Current Comparator)로 구성된 1.5-비트 비트 셀을 이용한 새로운 구조의 CMOS IADC(Current-mode Analog-to-Digital Convener)를 제안한다. 전체적인 IADC의 선형성 향상을 위하여 CFT(Clock Feedthrough)가 제거된 9-비트 해상도 CSH를 설계하여 각 비트 셀 전단에 배치하였다. 제안한 IADC를 구성하는 비트 셀은 2개의 래치 CCMP를 사용하기 때문에 디지털 교정 로직이 간소화되고 소비전력이 감소된다. 또한 IADC를 구성하는 모든 블록들의 회로는 MOS 트랜지스터로만 설계되었기 때문에 혼성모드 집적화에 유리하다. 제안한 IADC를 현대 0.8 ㎛ CMOS 파라미터로 HSPICE 시뮬레이션 결과, 20Ms/s에서 100 ㎑의 입력 신호에 대한 SNR은 43 dB로 7-비트의 해상도를 만족하였고 27 ㎽의 소비전력 특성을 나타냈다.
JSTS:Journal of Semiconductor Technology and Science
/
제11권4호
/
pp.238-246
/
2011
A 3-5 GHz UWB radar chip in 0.13 ${\mu}m$ CMOS process is presented in this paper. The UWB radar transceiver for surveillance and biometric applications adopts the equivalent time sampling architecture and 4-channel time interleaved samplers to relax the impractical sampling frequency and enhance the overall scanning time. The RF front end (RFFE) includes the wideband LNA and 4-way RF power splitter, and the analog signal processing part consists of the high speed track & hold (T&H) / sample & hold (S&H) and integrator. The interleaved timing clocks are generated using a delay locked loop. The UWB transmitter employs the digitally synthesized topology. The measured NF of RFFE is 9.5 dB in 3-5 GHz. And DLL timing resolution is 50 ps. The measured spectrum of UWB transmitter shows the center frequency within 3-5 GHz satisfying the FCC spectrum mask. The power consumption of receiver and transmitter are 106.5 mW and 57 mW at 1.5 V supply, respectively.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.