• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.39 no.1
• /
• pp.12-17
• /
• 2002

In this paper, an effective ionization coefficient for 4H-SiC is extracted in the form of c .E$^{m}$ from ionization coefficients of electron and hole. Analytical expressions for critical electric field and breakdown voltage of 4H-SiC p$^{+}$n junction are derived by employing the effective ionization coefficient. The analytic results agree well with the experimental ones reported within 10% in error for the doping concentration in the range of 10$^{15}$ cm$^{-3}$ ~10$^{18}$ cm$^{-3}$ . .

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.27 no.8
• /
• pp.497-500
• /
• 2014

In this paper, we analyze electrical characteristics of n/p-pillar layer according to trench angle which is the most important characteristics of SJ MOSFET and core process. Because research target is 600 V class SJ MOSFET, so conclusively trench angle deduced 89.5 degree to implement the breakdown voltage 750 V with 30% margin rate. we found that on resistance is $22mohm{\cdot}cm^2$ and threshold voltage is 3.5 V. Moreover, depletion layer of electric field distribution also uniformly distributes.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.32A no.1
• /
• pp.111-118
• /
• 1995

The three-dimentional effects on the breakdown voltage of non-reachthrough planar junctions which have the finite lateral radius of window curvature are analytically investigated. The critical electric fields at breakdown and the breakdown voltages are expressed successfully in a form which is normalized to the parallel plane case. The analytical results are in excellent agreement with the published results of experiment and the quasi-three-dimensional device simulation by MEDICI for non-reachthrough plane junctions having different background doping and junction depth. The results may be applicable to the estimations of breakdown voltages in many practical power devices.

• Journal of Electrical Engineering and Technology
• /
• v.9 no.3
• /
• pp.843-847
• /
• 2014

In Super Junction (SJ) MOSFETs, charge balance is the most important issue of the SJ fabrication process. In order to achieve the best electrical characteristics, such as breakdown voltage and on-resistance, the N-type and P-type drift regions must be fully depleted when the drain bias approaches the breakdown voltage, which is known as the charge balance condition. In conventional charge balance analysis, based on multi-epi process SJ MOSFETs, analytical model has only N, P pillar width and doping concentration parameter. But applying a conventional charge balance principle to trench filling process, easier than Multi-epi process, is impossible due to the missing of the trench angle parameter. To achieve much more superior characteristics of on-resistance in trench filling SJ MOFET, the appropriate trench angle is necessary. So in this paper, modulated charge balance analysis is proposed, in which a trench angle parameter is added. The proposed method is validated using the TCAD simulation tool.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 1998.05a
• /
• pp.405-408
• /
• 1998

In this paper, We analyzed the current-voltage characteristics with n-type silicon substrates concentration and temperature variations (Room temperature, 5$0^{\circ}C$, 75$^{\circ}C$) in platinum silicide and silicon junction. Measurement electrical parameters are forward turn-on voltage, reverse breakdown voltage, barrier height, saturation current, ideality factor, dynamic resistance acceding to junction concentration of substrates and temperature variations. As a result, the forward turn-on voltage, reverse breakdown voltage, barrier height and dynamic resistance were decreased but saturation current and ideality factor were increased by substrates concentration variations. Reverse breakdown voltage and dynamic resistance were increased by temperature variations.

• Proceedings of the Korean Magnestics Society Conference
• /
• 2007.05a
• /
• pp.145.1-145.1
• /
• 2007

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.7
• /
• pp.109-114
• /
• 2013

Power MOSFET (metal-oxide semiconductor field-effect transistor) are widely used in power electronics applications, such as BLDC (Brushless Direct Current) motor and power module, etc. For the conventional power MOSFET device structure, there exists a tradeoff relationship between specific on-state resistance and breakdown voltage. In order to overcome the tradeoff relationship, a non-uniform super-junction (SJ) trench MOSFET (TMOSFET) structure for an optimal design is proposed in this paper. It is required that the specific on-resistance of non-uniform SJ TMOSFET is less than that of uniform SJ TMOSFET under the same breakdown voltage. The idea with a linearly graded doping profile is proposed to achieve a much better electric field distribution in the drift region. The structure modelling of a unit cell, the characteristic analyses for doping density, and potential distribution are simulated by using of the SILVACO TCAD 2D device simulator, Atlas. As a result, the non-uniform SJ TMOSFET shows the better performance than the uniform SJ TMOSFET in the specific on-resistance at the class of 100V.

• ETRI Journal
• /
• v.37 no.5
• /
• pp.951-960
• /
• 2015

For a conventional power metal-oxide-semiconductor field-effect transistor (MOSFET), there is a trade-off between specific on-state resistance and breakdown voltage. To overcome this trade-off, a super-junction trench MOSFET (TMOSFET) structure is suggested; within this structure, the ability to sense the temperature distribution of the TMOSFET is very important since heat is generated in the junction area, thus affecting its reliability. Generally, there are two types of temperature-sensing structures-diode and resistive. In this paper, a diode-type temperature-sensing structure for a TMOSFET is designed for a brushless direct current motor with on-resistance of $96m{\Omega}{\cdot}mm^2$. The temperature distribution for an ultra-low on-resistance power MOSFET has been analyzed for various bonding schemes. The multi-bonding and stripe bonding cases show a maximum temperature that is lower than that for the single-bonding case. It is shown that the metal resistance at the source area is non-negligible and should therefore be considered depending on the application for current driving capability.

• Proceedings of the KIEE Conference
• /
• 1995.07c
• /
• pp.1146-1148
• /
• 1995

To improve the breakdown characteristics of vertical power devices, field limiting ring(FLR) is popularly used. In this paper, at vertical power device having $300{\sim}600V$ breakdown voltage, FLR thecnique is considered, by two dimensional computer simulator, with the various of parameters; number of FLR, seperation distance of first FLR from the main juncton and second FLR from the first FLR, doping concentration and thickness of epi-layer, etc.. Below $40{\mu}m$ epi thickness, and for the case of one FLR, the maximum breakdown voltage, 580V is obtained.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.35D no.8
• /
• pp.38-43
• /
• 1998

An analytical model for the surface field distribution of the RESURF (reduced surface field)LD(lateral double-diffused) MOS is presented in terms of the doping concentration, the thickness of the n epi layer, the p substrate concentration, and the epi layer length. The reuslts are used to determine the breakdown voltage due to the surface field as a function of the epi layer length. The maximum breakdown voltage of the device is found to be that of the vertical n$^{+}$n$^{[-10]}$ p$^{[-10]}$ junction. Analytical results of the breakdown voltage vs. the epi layer length agree well with the numerical simulation results using MEDICI.I.