• 대한전자공학회논문지SD
• /
• 제41권7호
• /
• pp.21-29
• /
• 2004

본 논문에서는 Dual oxide를 갖는 Nano-scale CMOSFET에서 각 소자의 Hot carrier 특성을 분석하여 두 가지 중요한 결과를 나타내었다. 하나는 NMOSFET Thin/Thick인 경우 CHC stress 보다는 DAHC stress에 의한 소자 열화가 지배적이고, Hot electron이 중요하게 영향을 미치고 있는 반면에, PMOSFET에서는 특히 Hot hole에 의한 영향이 주로 나타나고 있다는 것이다. 다른 하나는, Thick MOSFET인 경우 여전히 NMOSFET의 수명이 PMOSFET의 수명에 비해 작지만, Thin MOSFET에서는 오히려 PMOSFET의 수명이 NMOSFET보다 작다는 것이다. 이러한 분석결과는 Charge pumping current 측정을 통해 간접적으로 확인하였다. 따라서 Nano-scale CMOSFET에서의 NMOSFET보다는 PMOSFET에 대한 Hot camel lifetime 감소에 관심을 기울여야 하며, Hot hole에 대한 연구가 진행되어야 한다고 할 수 있다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2004년도 하계종합학술대회 논문집(2)
• /
• pp.327-330
• /
• 2004

It is shown that the hot carrier degradation due to enhanced hot holes trapping dominates PMOSFETs lifetime both in thin and thick devices. Moreover, it is found that in 0.13 ${\mu}m$ CMOSFET the PMOS lifetime under CHC (Channel Hot Carrier) stress is lower than the NMOSFET lifetime under DAHC (Drain Avalanche Hot Carrier) stress. Therefore. the interface trap generation due to enhanced hot hole injection will become a dominant degradation factor. In case of thick MOSFET, the degradation by hot carrier is confirmed using charge pumping current method and highly necessary to enhance overall device lifetime or circuit lifetime in upcoming nano-scale CMOS technology.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1999년도 하계종합학술대회 논문집
• /
• pp.243-246
• /
• 1999

We studied the MOSFET characteristics and the hot-carrier reliability with the sidewall spacer composition and the post gate oxidation thickness in 0.20${\mu}{\textrm}{m}$ gate length transistor. The MOSFET with NO(Nitride＋Oxide) sidewall spacer exhibits the large degradation of hot-carrier lifetime because there is no buffering oxide against nitride stress. When the post gate oxidation is skipped, the hot-carrier lifetime is improved, but GIDL (Gate Induced Drain Leakage) current is also increased.

• 한국전기전자재료학회논문지
• /
• 제33권3호
• /
• pp.169-172
• /
• 2020

In this paper, the effect of hot carrier injection on an n-bulk fin field-effect transistor (FinFET) is analyzed. The hot carrier injection method is applied to determine the performance change after injection in two ways, channel hot electron (CHE) and drain avalanche hot carrier (DAHC), which have the greatest effect at room temperature. The optimum condition for CHE injection is V_G=V_D, and the optimal condition for DAHC injection can be indirectly confirmed by measuring the peak value of the substrate current. Deterioration by DAHC injection affects not only hot electrons formed by impact ionization, but also hot holes, which has a greater impact on reliability than CHE. Further, we test the amount of drain voltage that can be withstood, and extracted the lifetime of the device. Under CHE injection conditions, the drain voltage was able to maintain a lifetime of more than 10 years at a maximum of 1.25 V, while DAHC was able to achieve a lifetime exceeding 10 years at a 1.05-V drain voltage, which is 0.2 V lower than that of CHE injection conditions.

• 한국전기전자재료학회논문지
• /
• 제15권1호
• /
• pp.1-6
• /
• 2002

The hot carried degradation in a metal oxide semiconductor device has been one of the most serious concerns for MOS-ULSI. In this paper, three types of LDD(lightly doped drain) structure for suppression of hot carried degradation, such as decreasing of performance due to spacer-induced degradation and increase of series resistance will be investigated. in this study, LDD-nMOSFETs used had three different drain structure, (1) conventional surface type LDD(SL), (2) Buried type LDD(BL), (3) Surface implantation type LDD(SI). As experimental results, the surface implantation the LDD structure showed that improved hot carrier lifetime to comparison with conventional surface and buried type LDD structures.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1999년도 하계종합학술대회 논문집
• /
• pp.970-973
• /
• 1999

When the size of the device is decreased, the hot carrier degradation presents a severe problem for long-term device reliability. In this paper we fabricated & tested the 0.26${\mu}{\textrm}{m}$ NMOSFET with wet gate oxide and nitride oxide gate to compare that the characteristics of hot carrier effect, charge to breakdown, transistor Id_Vg curve and charge trapping using the Hp4145 device tester As a result we find that the characteristics of nitride oxide gate device better than wet gate oxide device, especially a hot carrier lifetime(nitride oxide gate device satisfied 30years, but the lifetime of wet gate oxide was only 0.1year), variation of Vg, charge to breakdown and charge trapping etc.

• 대한전자공학회논문지
• /
• 제25권2호
• /
• pp.182-187
• /
• 1988

Hot carrier induced device degradation characteristics under DC bias stress have been investigated in n-MOSFETs with channel length of 1.2,1.8 um, and compared with those of LDD structure device with same channel length. Based on these results, the device lifetime in normal operating bias(Vgs=Vds=5V) is evaluated. The lifetimes of conventional and LDD n-MOSFET with channel length of 1.2 um are estimated about for 17 days and for 12 years, respectively. The degradation rate of LDD n-MOSFET under the same stress is the lowest at n-region implnatation dose of 2.5E15 cm-\ulcorner while the substrate current is the lowest at the dose of 1E13cm-\ulcorner Thses results show that the device degradation characteristics are basic measurement parameter to find optimum process conditions in LDD devices and evaluate a reliability of sub-micron device.

• Transactions on Electrical and Electronic Materials
• /
• 제7권1호
• /
• pp.1-6
• /
• 2006

Hot carrier degradation and roll off characteristics of threshold voltage ($V_{t1}$) on NMOSFETs as I/O transistor are studied as a function of Lightly Doped Drain (LDD) structures. Pocket dose and the combination of Phosphorus (P) and Arsenic (As) dose are applied to control $V_{t1}$ roll off down to the $10\%$ gate length margin. It was seen that the relationship between $V_{t1}$ roll off characteristic and substrate current depends on P dopant dose. For the first time, we found that the n-p-n transistor triggering voltage ($V_{t1}$) depends on drain current, and both $I_{t2}$ and snapback holding voltage ($V_{sp}$) depend on the substrate current by characterization with a transmission line pulse generator. Also it was found that the improved lifetime for hot carrier stress could be obtained by controlling the P dose as loosing the $V_{t1}$ roll off margin. This study suggests that the trade-off characteristic between gate length margin and channel hot carrier (CHC) lifetime in NMOSFETs should be determined by considering Electrostatic Discharge (ESD) characteristic.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2009년도 춘계학술대회 논문집
• /
• pp.172-175
• /
• 2009

n-type crystalline silicon wafers were passivated with intrinsic a-Si:H thin films on both sides using HWCVD. Minority carrier lifetime measurement was used to verify interface passivation properties between a-Si:H thin film and crystalline Si wafer. Thin film interface characteristics were investigated depending on $H_2/SiH_4$ ratio and hot wire deposition temperature. Vacuum annealing were processed after deposition a-Si:H thin films on both sides to investigate thermal effects from post process steps. We noticed the effect of interface passivation properties according to $H_2/SiH_4$ ratio and hot wire deposition temperature, and we had maximum point of minority carrier lifetime at H2/SiH4 10 ratio and $1600^{\circ}C$ wire temperature.

• 한국컴퓨터정보학회논문지
• /
• 제9권1호
• /
• pp.9-15
• /
• 2004

본 논문에서는 드레인 부근의 채널 영역에서 접합 전계를 줄이는 WSW(Wrap Side Wall) 구조의 소자를 제안하였다. WSW구조의 소자 제작은 첫 번째 게이트를 식각한 후에 NM1(N-type Minor1) 이 온주입을 하고 다시 질화막을 덮어 식각함으로서 만들어진다. 새로운 WSW구조는 전계를 줄이기 위한 버퍼층으로 되어 있으며 WSW소자와 LDD구조의 소자 수명을 비교하였으며 핫-캐리어 열화 특성도 분석하였다. 또한 AC 핫-캐리어 열화를 칩 상에서 평가하기 위해 펄스 발생기, 레벨 시프터, 주파수 분배기를 포함한 테스트 패턴 회로를 설계하였다. 이러한 것은 AC와 DC 스트레스간의 핫-캐리어 열화 조건이 AC와 DC 스트레스 모두 동일한 물리적 메커니즘을 지닌다는 것을 알 수 있었다. 따라서 일반적으로 회로 동작 조건 하에서 DC 핫-캐리어 열화 특성을 토대로 AC 소자 수명도 예측할 수 있었다.