• 제목/요약/키워드: Gate characteristics

검색결과 1,735건 처리시간 0.025초

Effects of Transfer Gate on the Photocurrent Characteristics of Gate/Body-Tied MOSFET-Type Photodetector

  • Jang, Juneyoung;Seo, Sang-Ho;Kong, Jaesung;Shin, Jang-Kyoo
    • 센서학회지
    • /
    • 제31권1호
    • /
    • pp.12-15
    • /
    • 2022
  • In this study, we studied the effects of transfer gate on the photocurrent characteristics of gate/body-tied (GBT) metal-oxide semiconductor field-effect transistor (MOSFET)-type photodetector. The GBT MOSFET-type photodetector has high sensitivity owing to the amplifying characteristic of the photocurrent generated by light. The transfer gate controls the flow of photocurrent by controlling the barrier to holes, thereby varying the sensitivity of the photodetector. The presented GBT MOSFET-type photodetector using a built-in transfer gate was designed and fabricated via a 0.18-㎛ standard complementary metal-oxide-semiconductor (CMOS) process. Using a laser diode, the photocurrent was measured according to the wavelength of the incident light by adjusting the voltage of the transfer gate. Variable sensitivity of the presented GBT MOSFET-type photodetector was experimentally confirmed by adjusting the transfer gate voltage in the range of 405 nm to 980 nm.

1,200 V급 Trench Gate Field Stop IGBT 소자의 전기적 특성 향상 방안에 관한 연구 (A Study on the Electrical Characteristics with Design Parameters in 1,200 V Trench Gate Field Stop IGBT)

  • 금종민;정은식;강이구;성만영
    • 한국전기전자재료학회논문지
    • /
    • 제25권4호
    • /
    • pp.253-260
    • /
    • 2012
  • IGBT (insulated gate bipolar transistor) have received wide attention because of their high current conduction and good switching characteristics. To reduce the power loss of IGBT, the on state voltage drop should be lowered and the switching time should be shorted. However, there is Trade-off between the breakdown voltage and the on state voltage drop. To achieving good electrical characteristics, field stop IGBT (FS IGBT) is proposed. In this paper, 1,200 V planar gate non punch-through IGBT (planar gate NPT IGBT), planar gate FS IGBT and trench gate FS IGBT is designed and optimized. The simulation results are compared with each three structures. In results, we optain optimal design parameters and confirm excellence of trench gate FS IGBT. Experimental result by using medici, shows 40% improvement of on state voltage drop.

Wet 게이트 산화막과 Nitride 산화막 소자의 특성에 관한 연구 (A Study on Characteristics of Wet Gate Oxide and Nitride Oxide(NO) Device)

  • 이용희;최영규;류기한;이천희
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 1999년도 하계종합학술대회 논문집
    • /
    • pp.970-973
    • /
    • 1999
  • When the size of the device is decreased, the hot carrier degradation presents a severe problem for long-term device reliability. In this paper we fabricated & tested the 0.26${\mu}{\textrm}{m}$ NMOSFET with wet gate oxide and nitride oxide gate to compare that the characteristics of hot carrier effect, charge to breakdown, transistor Id_Vg curve and charge trapping using the Hp4145 device tester As a result we find that the characteristics of nitride oxide gate device better than wet gate oxide device, especially a hot carrier lifetime(nitride oxide gate device satisfied 30years, but the lifetime of wet gate oxide was only 0.1year), variation of Vg, charge to breakdown and charge trapping etc.

  • PDF

배수갑문 테인터 게이트(Tainter Gate)의 진동현상에 관한 모형실험(Ⅱ)- 문비 안에서 밖으로의 흐름 - (Model Tests Study on Flow-induced Vibrationof Tainter Gate in Estuary Sulices(Ⅱ)- Flow from the Gate Inside to the Gate Outside -)

  • 이성행;우상익
    • 한국농공학회논문집
    • /
    • 제46권2호
    • /
    • pp.41-47
    • /
    • 2004
  • A model test is carried out to investigate flow-induced vibration of a Tainter gate in estuary sulices. The gate model scaled with the ratio of 1:25 is made of acryl panel dimensioned 0.66 m in width, 0.5 m in height in the concrete test flume. Firstly, natural frequencies of the model gate are measured and the results are compared with the numerical results in order to verify the model. In the flow from the gate inside to the gate outside, the amplitudes of the vibration are measured under the different gate opening and downstream water level conditions. Also revised gate models with 20 mm bottom width are tested under the different gate openings and water levels. The results are analyzed to study the characteristics of the Tainter gate vibration in the sea ward flow. These test results are assessed in comparison with the results in the lake ward flow, as a result, presents the dynamic characteristics of the Tainter gate and a basic data for the guide manuals of gate management.

Intrinsic Cylindrical/Surrounding Gate SOI MOSFET의 I-V 특성 도출을 위한 해석적 모델 (Analytical Model for Deriving the I-V Characteristics of an Intrinsic Cylindrical Surrounding Gate MOSFET)

  • 우상수;이재빈;서정하
    • 대한전자공학회논문지SD
    • /
    • 제48권10호
    • /
    • pp.54-61
    • /
    • 2011
  • 본 논문에서는 intrinsic-body cylindrical/surrounding gate SOI MOSFET의 I-V 특성 도출을 위한 간단한 해석적 모델을 제시하였다. Intrinsic 실리콘 채널 영역에서의 Poisson 방정식과 gate oxide 내에서의 Laplace 방정식을 해석적으로 풀어 소스와 드레인 양단 끝에서의 표면 전위 분포를 bisection method를 이용하여 구하였다. 구해진 표면 전위를 바탕으로 closed-form의 I-V 특성 식을 도출하였다. 도출된 I-V 특성 표현 식을 모의 실험한 결과, 소자의 parameter와 가해진 bias 전압에 대한 비교적 정확한 의존성을 확인할 수 있었다.

나노 구조 Double Gate MOSFET 설계시 side gate의 최적화 (Optimization of Side Gate in the Design for Nano Structure Double Gate MOSFET)

  • 김재홍;고석웅;정학기
    • 한국정보통신학회:학술대회논문집
    • /
    • 한국해양정보통신학회 2002년도 추계종합학술대회
    • /
    • pp.490-493
    • /
    • 2002
  • 본 논문에서는 main gate와 side gate를 갖는 double gate MOSFET의 side gate 길이와 side gate 전압에 대한 최적의 값을 조사하였다. main gate 50nm에서 각각의 side gate 길이에 대한 최적의 side gate 전압은 대략 3V이다. 또한, main gate 길이에 대한 최적의 side gate 길이는 대략 70nm이다. 이때, side gate 길이에 대한 전달 컨덕턴스 및 subthreshold slope에 대한 값들을 나타내었다. 이때 소자의 특성 분석을 위해 ISE-TCAD를 사용하여 시뮬레이션 하였다.

  • PDF

탄소나노튜브 트랜지스터 특성 연구 (Characteristics of CNT Field Effect Transistor)

  • 박용욱;나상엽
    • 한국전자통신학회논문지
    • /
    • 제5권1호
    • /
    • pp.88-92
    • /
    • 2010
  • 본 연구에서는 기존의 반도체 공정을 이용하여 bottom gate, top gate구조의 탄소나노튜브 트랜지스터를 제작하였다. 게이트 특성에 따른 특성을 연구하기 위하여 열화학 기상 증착법(CVD)으로 탄소나노튜브를 디바이스에 직접 성장시키고, 탄소나노튜브의 성장 특성 및 I-V동작 특성을 분석하였다. 제작된 탄소나노튜브 FET는 p-type, 즉 hole이 다수 캐리어로 존재하는 트랜지스터이며 구동전압에 따라 conductance 변화하는 특성을 보였다.

AlGaN/GaN-on-Si Power FET with Mo/Au Gate

  • Kim, Hyun-Seop;Jang, Won-Ho;Han, Sang-Woo;Kim, Hyungtak;Cho, Chun-Hyung;Oh, Jungwoo;Cha, Ho-Young
    • JSTS:Journal of Semiconductor Technology and Science
    • /
    • 제17권2호
    • /
    • pp.204-209
    • /
    • 2017
  • We have investigated a Mo/Au gate scheme for use in AlGaN/GaN-on-Si HFETs. AlGaN/GaN-on-Si HFETs were fabricated with Ni/Au or Mo/Au gates and their electrical characteristics were compared after thermal stress tests. While insignificant difference was observed in DC characteristics, the Mo/Au gate device exhibited lower on-resistance with superior pulsed characteristics in comparison with the Ni/Au gate device.

P-채널 MOSFET에서 게이트와 기판 전류의 시간에 따른 복원 특성 (Restoration Characteristics along to Time of the Gate and Substrate Current in p-channel MOSFETS)

  • 조상운;장원수;배지철;이용재
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 2003년도 하계종합학술대회 논문집 II
    • /
    • pp.1101-1104
    • /
    • 2003
  • In this paper, we analyzed the gate current and substrate current by the hot carrier effects and restoration phenomenon of characteristics by time in the p-channel MOSFETs. The Stress voltage condition is a voltage in maximum gate current and time is 3s, 10s, 30s, l00s, 1000s, 2000s and 3000s. As results of analysis, the gate current and substrate current were decreased by stress time, and the restoration time of characteristics were shown the results that were decreased by the exponential times.

  • PDF

N-채널 박막 SOI MOSFET의 후면 바이어스에 따른 전기적 특성 분석 (Analysis of the electrical characteristics with back-gate bias in n-channel thin film SOI MOSFET)

  • 이제혁;임동규;정주용;이진민;김영호
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 1999년도 추계학술대회 논문집
    • /
    • pp.461-463
    • /
    • 1999
  • In this paper, we have systematically investigated the variation of electrical characteristics with back-gate bias of n-channel SOI MOSFET\\`s. When positive bias is applied back-gate surface is inverted and back channel current is increased. When negative bias is applied back-gate surface is accumulated but it does not affect to the electrical characteristics.

  • PDF