• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.10 no.5
• /
• pp.71-78
• /
• 2011

In this paper, we describe the design and implementation of a high efficiency and broad-band Class-J mode power amplifier using gallium nitride(GaN) high-electron mobility transistor(HEMT). The matching circuit of proposed class-J mode power amplifier for 2nd harmonic impedance designed to provide pure reactance alone. The measurement results show that output power of $40{\pm}1$ dBm, power-added efficiency of 50%, and drain efficiency of 60% for a continuous wave signal at 1.4 to 2.6 GHz.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.26 no.6
• /
• pp.540-545
• /
• 2015

This paper presents the design, fabrication and measurement results of a S-band internally-matched power amplifier using Gallium Nitride High Electron Mobility Transistor(GaN HEMT) die. In order to fabricate the S-band internally-matched power amplifier, a high dielectric substrate and alumina were used for input/output matching circuits. The measured output power is 55.4 dBm, the drain efficiency is 78 % and the power gain is 11 dB under pulse operation at the frequency of 3 GHz.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.54 no.3
• /
• pp.109-113
• /
• 2005

It has been reported that the failure phenomenon and variation of electrical characteristic due to the effect of electrostatic discharge(ESD) in silicon devices. But we had fess reports about the phenomenon due to the ESD in the compound semiconductors. So there are a lot of difficulty to the phenomenon analysis and to select the protection method of main circuits or the devices. It has not been reported that the relation between the ESD stress and GaN devices, which is remarkable to apply the operation in high temperature and high voltage due to the superior material characteristic. We studied that the characteristic variation of the AlGaN/GaN HEMT current, the leakage current, the transconductance(gm) and the failure phenomenon of device due to the ESD stress. We have applied the ESD stress by transmission line pulse(TLP) method, which is widely used in ESD stress experiments, and observed the variation of the electrical characteristic before and after applying the ESD stress. The on-current trended to increase after applying the ESD stress. The leakage current and transconductance were changed slightly. The failure point of device was mainly located in middle and edge sides of the gate, was considered the increase of temperature due to a leakage current. The GaN devices have poor thermal characteristic due to usage of the sapphire substrate, so it have been shown to easily fail at low voltage compared to the conventional GaAs devices.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.14 no.4
• /
• pp.478-483
• /
• 2014

We propose a new method which can extract the information about the electronic traps in the semi-insulating GaN buffer of AlGaN/GaN heterostructure field-effect transistors (HFETs) using a simple test structure. The proposed method has a merit in the easiness of fabricating the test structure. Moreover, the electric fields inside the test structure are very similar to those inside the actual transistor, so that we can extract the information of bulk traps which directly affect the current collapse behaviors of AlGaN/GaN HEFTs. By applying the proposed method to the GaN buffer structures with various unintentionally doped GaN channel thicknesses, we conclude that the incorporated carbon into the GaN back barrier layer is the dominant origin of the bulk trap which affects the current collapse behaviors of AlGaN/GaN HEFTs.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.06a
• /
• pp.5-5
• /
• 2010

Gallium Nitride(GaN)는 LED, Laser 등에 사용되는 광학적 특성뿐만 아니라 Wide Bandgap의 전기적 특성 또한 주목받고 있다. 본 논문은 600V급 GaN(Gallium Nitride) Power SIT(Static Induction Transistor)에 대해서 Design Parameter 변환에 따른 전기적 (Breakdown Voltgage, On-state Voltage Drop)특성과 열적 (Lattice Temperature Distribution)특성변화를 분석하여 소자가 갖는 구조적 손실을 최소화하였다. 또한, 기존 실리콘 기반 전력소자와 특성 비교를 통하여 GaN Power SIT의 우수성을 증명하였다. GaN Power SIT 소자 설계 및 최적화를 위해서 Silvaco사의 소자 시뮬레이터인 ATLAS를 사용하였다. 실험 결과 수 ${\mu}m$의 소자 두께만으로도 실리콘 전력소자에 비해 더 뛰어난 열 특성과 더 적은 전력소모를 갖는 600V급 GaN Power SIT 소자를 구현할 수 있었다.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.16 no.6
• /
• pp.867-872
• /
• 2016

We have investigated the channel mobility of AlGaN/GaN-on-Si recessed-metal-oxide-semiconductor-heterojunction field-effect transistors (recessed-MOS-HFET) with $SiO_2$ gate oxide. Both field-effect mobility and effective mobility for the recessed-MOS channel region were extracted as a function of the effective transverse electric field. The maximum field effect mobility was $380cm^2/V{\cdot}s$ near the threshold voltage. The effective channel mobility at the on-state bias condition was $115cm^2/V{\cdot}s$ at which the effective transverse electric field was 340 kV/cm. The influence of the recessed-MOS region on the overall channel mobility of AlGaN/GaN recessed-MOS-HFETs was also investigated.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.26 no.7
• /
• pp.620-626
• /
• 2015

In this paper, a 2~6 GHz wideband GaN power amplifier MMIC is designed and fabricated using a second-order all-pass filter for input impedance matching and an LC parallel resonant circuit for minimizing an output reactance component of the transistor. The second-order all-pass filter used for wideband lossy matching is modified in an asymmetric configuration to compensate the effect of channel resistance of the GaN transistor. The power amplifier MMIC chip that is fabricated using a $0.25{\mu}m$ GaN HEMT foundry process of Win Semiconductors, Corp. is $2.6mm{\times}1.3mm$ and shows a flat linear gain of about 13 dB and input return loss of larger than 10 dB. Under a saturated power mode, it also shows output power of 38.6~39.8 dBm and a power-added efficiency of 31.3~43.4 % in 2 to 6 GHz.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.06a
• /
• pp.337-337
• /
• 2010

갈륨-질화물 (GaN) 기반의 고 전자 이동도 트랜지스터 (High Electron Mobility Transistor, HEMT)는 GaN의 큰 밴드갭 (3.4~6.2 eV), 높은 항복전계 (Ec~3 MV/cm) 및 높은 전자 포화 속도 (saturation velocity $-107\;cm{\cdot}s-1$) 특성과 AlGaN/GaN 등과 같은 이종접합구조(Heterostructure )로부터 발생하는 높은 면밀도(Sheet Concentration)를 갖는 이차원 전자가스(Two-Dimensional Electron Gas, 2DEG) 채널로 인해 차세대 고출력/고전압 소자로서 각광받고 있다. 하지만 드레인 쪽의 게이트 에지부분에 집중되는 전계로 인한 애벌린치 할복현상(Breakdown)이 발생하는 문제점이 있다. 따라서 AlGaN/GaN HEMT의 항복전압 향상을 위한 방법으로 필드플레이트(Field-Plate) 구조가 많이 사용되고 있다. 본 논문에서는 2D 시뮬레이션을 통한 AlGaN/GaN HEMT의 필드플레이트 구조 최적화를 수행하였다. 이를 위해 ATLASTM 전산모사 프로그램을 이용하여 필드플레이트 길이, 절연체 증류 및 두께에 따른 전류 전압 특성 및 전계 분산효과에 대한 전산모사를 수행하여 그 결과를 비교, 분석 하였다, 이를 바탕으로 기존의 구조에 비해 약 300%이상 향상된 항복전압을 갖는 AlGaN/GaN HEMT의 최적화된 필드 플레이트 구조를 제안하였다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.9 no.3
• /
• pp.649-657
• /
• 2008

This paper describes the optimized output performances such as output power and the third order intermodulation in GaN high power transistor packages which consist of chip die, chip capacitors, and wire bonding. The optimized output power according to wire bonding techniques, and third order intermodulation performances according to wire bonding and bias conditions are discussed. In addition, it is shown through the nonlinear simulation that how the output performances are sensitive to the inductance values which are realized by wire bonding for matching network in the limited package area.

• Proceedings of the KIPE Conference
• /
• 2015.11a
• /
• pp.5-6
• /
• 2015

본 논문은 GaN (Gallium Nitride) HEMT (High Electron Mobility Transistor) 소자의 동작 특성과 Normally-off형 p-GaN 및 cascode-GaN 소자의 구현 방식에 따른 차이점을 분석한다. 두 소자의 차이점에 따른 동작 특성을 비교하고 게이트 구동 시 고려되어야 할 설계 요소를 분석한다.