한국정보통신설비학회:학술대회논문집
Korea Institute of Information and Telecommunication Facilities Engineering (KIITFE)
- 기타
2006.08a
-
초고속 광대역서비스 제공을 위한 FTTH-PON 광선로의 특성을 시험하기 위해 선로구축 단계, 개통단계, 고장처리 단계로 나누어 측정할 수 있는 방법에 대해 고찰해 보았다. 시스템의 허용손실 기준에 따라 구축된 광선로는 대표적으로 광손실, 광반사손실을 측정하여 접속품질을 확인할 수 있는데 OTDR 및 광파워메터를 활용한 구간별 측정방법을 다루었다. 또한 광옥외선의 단말에 현장조립형광커넥터를 사용하는 경우 접속 후 불량여부를 판단하기 위한 실험 결과를 소개하였다.
-
FTTH service has been deployed since last year in the single dwelling unit environment. FTTH based on PON technology has many advantages in OPEX compared to FTTC solutions using the BBx. But this is not the case for the MDU environment where new wiring of the fiber cable in the customer premises network costs a lot of money. The purpose of Hybrid-FTTH is to overcome this problem by preserving the wiring environment of the customer premises environment in MDU but still guarantee the quality of service provided by FTTH. In this thesis, we present Hybrid-FTTH technology, especially focused on the DWDM-PON based Hybrid-FTTH technology and its development status.
-
This paper reviews the optical link technologies which have been developed for gigabit-per-second wavelength-division-multiplexing passive optical networks (WDM-PONs). Similarly to the 100Mb/s WDM-PON systems which have been deployed for trial services by KT, the most important requirement for 1Gb/s WDM-PON is wavelength independence (colorless feature) of its ONU/ONTs, which makes possible convenient operation and cost-effective maintenance with minimum inventory cost. Among various methods to implement such colorless feature, four promising candidates for gigabit WDM-PON are analyzed with their own development issues and their expected performances are compared.
-
We have proposed a broadband analog feedforward optical transmitter using a wideband
$180^{\circ}$ hybrid coupler instead of conventional frequency-sensitive phase shifter with the narrow bandwidth property using a wideband$180^{\circ}$ hybrid coupler, the wide-band linearization technique enhances the linearity of the feedforward optical transmitter. In two-tone cases, the$3^{rd}-IMD$ products was enhanced more than 10 dB in 385 MHz range(1.375$\sim$ l.76 GHz). -
Latching optical switches and optical logic gates AND and OR are demonstrated, for the first time, by the monolithic integration of a vertical cavity lasers with depleted optical thyristor structure, which have not only a low threshold current with 0.65 mA. but also a high on/off contrast ratio more than 50 dB. By simple operating technique with changing a reference switching voltage, this single device operates as two logic functions, optical logic AND and OR. The thyristor laser fabricated using the oxidation process achieved a high optical output power efficiency and a high sensitivity to the optical input light.
-
현재 VoIP의 서비스 방향은 정부에서 사업자에게 인터넷전화 착신번호 부여를 계기로 인터넷전화 시장은 새롭게 조명되기 시작했고 관련사업자들도 하나둘씩 늘어날 조짐을 보이고 있다. 따라서 사용자의 보호를 위해 인터넷전화 사업자는 일정수준 이상의 통화 품질을 이용자에게 제공할 수 있도록 하는 제도적 장치가 마련되어야 한다. 그러므로 인터넷전화 서비스의 품질측정 기술 및 기준은 매우 중요하다. 이용자의 서비스에 대해 객관적인 평가방법을 마련 할 필요가 있다. 그러므로 본 논문에서는 이를 위해 인터넷 전화 서비스의 국내동향, 품질평가 기술 및 통화품질 측정방법에 대하여 기술하였다.
-
Using the repeaters is indispensable to WiBro services. Repeater types are distinguished by usage, output power and required performance. In the paper, we have studied on the WiBro digital optic repeater design which has excellent performance characteristic than any other repeaters. WiBro has specific characteristic on modulation method TDD(Time Division Duplex)/OFDMA(Orthogonal Frequency Division Multiple Access) so that it demands specified H/W to design WiBro repeater. Switching technique has been introduced because of TDD characteristic in each amplifier on the repeater. Time Advance technique has been considered because of OFDM characteristic among RAS(Radio Access Station) and repeater. In this paper, we have studied on these techniques to increase repeater cell coverage and distance between RAS and repeater.
-
There are various analysis functions(including prediction of path loss, analyzing of capacity and coverage, etc.) of simulation tool to design and optimize the mobile communication network. Its reliability absolutely effects the performance of mobile communication network. Especially as the wireless network highly advancing focused on data service, it more needs to research and develop on the standard establishment of reliability of the simulation tool. Also it is important the systematic research how to improve the reliability of simulation tool. In this paper, to give the concrete process and skill about how to improve reliability, we define the kinds of reliability at first. And then we explain the comparison results between real field measurement data and theoretic simulation data.
-
IEEE 802.16 WirelessMAN aiming to broadband wireless access (BWA) is evolving to 4G mobile communication system through the standardization of IEEE 802.16e supporting mobility on existing fixed WirelessMAN system. It is necessary for hand-over to provide seamless data service while MS (Mobile Station) moves to another BS (Base Station). Because the performance of handover affects packet loss or delay of any communications, it must consider low latency handover mechanism in packet based network. In this paper, we describes handover scheme of IEEE 802.16e with the cell edge interference problem and shows the way to solve the problem in frequency reuse one deployment. Our scheme reduces the handover latency and packet loss probability.
-
In this paper, we suggested new network architecture to provide seamless service between the cellular system and new wireless broadband network such as IEEE 802.16e, called WiBro. The interworking technologies are very important issue because mobile operator should provide service connectivity between various wireless networks based on different access technologies. Moreover a change and modification on legacy network should be minimized for providing interworking with new wireless broad-band network. We implemented proposed interworking architecture between 3G cellular network and 802.16e network to provide seamless service including interworking unit in real test environment. Also, we performed performance evaluation in hybrid network environments.
-
WiBro service provider have made an effort to provide the subscriber's location and have deployed LBS system using cell-ID method. Cell-ID method has a location error problem if repeater is used on the other cell places at the same time. We introduce and analysis LMU(Location Measurement Unit) on the repeater fer location detection of subscriber which is serviced via the repeater. In this paper we propose the method using LMU on the repeater to avoid these location errors and to provide more exact location to the subscriber. we can conclude that the location error can be more exact at the building which uses repeater. It represents in which level the subscriber is serviced at the building.
-
As high speed internet users are tremendously increasing, three are keenly in need of development of high speed portable internet technology which can provide high quality wireless internet service cheaply even in the mobile. Unlike the FDD-CDMA, TDD-OFDMA has relatively poor wave environment with inducing interference, fading and delay because it agrees to multi-carrier modulation method and time-division radio telecommunication system. To solve this problem, it is necessary to develop repeater operating by digital signal processing method which have more strict wireless channel control and wave signal processing technology over TDD telecommunication equipments. This thesis is dealing with design and implementation of Digital RF Repeater which implemented 'Synchronization Acquisition Unit', 'TDD signal switching Unit', 'Feedback Signal Cancellation Unit'. Over this argument, we will develop digital RF repeater with more cheap, more adaptive in wave environment like oscillation control, adaptive wave monitoring and output increasing and having control function as a result it will be helpful for success in high speed portable internet service business.
-
A Study on Improvement for Efficiency and Linearity of Doherty Amplifier using Envelope Predistorter본 논문은 도허티 증폭기 및 포락선 전치 왜곡기를 이용한 전력 증폭기의 효율 및 선형성 개선에 관한 것이다. 전력 증폭기의 효율을 개선하기 위하여 도허티 증폭기를 제작하여 효율 특성을 개선하였으며, 포락선 전치 왜곡기를 이용하여 도허티 증폭기의 선형성 개선량에 대하여 조사하였다. 제작된 도허티 증폭기는 AB 급으로 동작시킨 전력 증폭기와 비교하여 출력 전력 10W에서 8.5%의 효율 개선 효과를 보였으며, 출력 전력 40W에서 12.6%의 효율 개선 특성을 나타내었다. 포락선 전치 왜곡기를 이용한도 허티 증폭기는 출력 전력 10W에서 7dB의 선 형성 개선 효과를 나타내었다. IMT-2000 주파수 대역에서 WCDMA down-link 4 carrier 신호를 이용하여 출력 전력 10W에서 측정한 결과 AB 급으로 동작하는 전력 증폭기와 비교하여 4.2%의 효율 개선 및 6.3dB의 선형성 개선 효과를 나타내었다.
-
This paper deals with a single crystalline silicon (SCS) RF MEMS switch for telecommunication system applications. The proposed SCS switch was fabricated using a silicon-on-glass (SiOG) process and its performances in terms of RF responses, switching time, lifetime were characterized. The proposed SCS switch consists of movable plates, mechanical spring structures, which are composed of robust SCS, resulting in mechanically good stability, The measured actuation voltage was 30 V, and with this applied voltage, the insertion loss and isolation characteristics were measured to be 0.05 and 44.6 dB at 2 GHz respectively. The measured switch ON and OFF time were 13 and
$9{\mu}s$ , respectively. The lifetime of the fabricated switch was tested. Even after over 1 billion cycles repeated ON/OFF actuations, the switch maintained its own characteristics. -
International Roaming is a kind of telecommunication service that enables subscribers use the same mobile number when they go abroad and access other service provider's network. International roaming call is made through three network parts-home (original service provider) network, intermediate network, and local (overseas service provider) network. It is not possible to monitor every section of whole roaming service network because service providers do not provide their network management information to other service providers. The limitation causes harsh problem when a service anomaly arises and operators have to confirm the reason of failure. To solve this problem, we propose a scheme that deduces roaming service status of each overseas service provider using internal network management information. SK telecom implemented a international roaming service management system based on the scheme using performance measurement of signaling points, roaming service nodes, and charging data from existing network management systems.
-
Because of the rapid increasing of network user, there are some problems to tolerate the network overhead. Recently, the research and technology of the user-level for high performance and low latency than TCP/IP which relied upon the kernel for processing the messages. For example, there is an Infiniband technology. The Infiniband Trade Association (IBTA) has been proposed as an industry standard for both communication between processing node and I/O devices and for inter-processor communication. It replaces the traditional bus-based interconnect with a switch-based network for connecting processing node and I/O devices. Also Infiniband uses RDMA (Remote DMA) for low latency of CPU and OS to communicate between Remote nodes. In this paper, we develop the SRP (SCSI RDMA Protocol) which is Storage Access Protocol on Infiniband network. And will compare to FC (Fibre Channle) based I-SCSI (Internet SCSI) that it is used to access storage on Etherent Fabric.
-
Film has been used widely since Auguste and Louis Lumiere hold the first private screening in 1895. Star Wars Episode II: Attack of the Clones directed by George Lucas released on May 16, was the first motion picture both to be shot completely on a high definition digital 24-frame system and to be projected by digital projectors. Its success showed us that the digital cinema era is imminent. Digital Cinema will enable the studios and movie distributors to low the expenses of making and delivering film prints and dissemination of it can put the entire digital cinema ecosystem in great jeopardy. Therefore DRM and other security policies are used for digital cinema content protection. In this paper it will be discussed how the digital cinema platform can package (encooe & encrypt), transport, and project the digital cinema contents safely.
-
Nowadays, we can enjoy access to high speed network and advanced services of convergence between broadcasting and communication anywhere and anytime through a ubiquitous computing. So, now digital convergence devices come out constantly. These devices are required faster network environment for high speed data processing than before. In this paper, we describe the design of InfiniBnad network adapter, which is included two FPGA chipsets. When this adapter is installed to Digital Convergence Platform (DCP) network performance will be improved. The adapter includes 12channel serial ports for external communication and internally, uses PCI-Express bus. We have finished the test of high speed serial based network adapter through composing complete InfiniBand network and applied fabric management software. So, we have verified that it can be applied on DCP environment.
-
In this paper, we deployed the tunnel inspection and monitoring system by wireless sensor network. It is shown that the wireless sensor network which is composed of sensor, wireless communication module, and gateway system can be applied to tunnel monitoring system. Sensors included herein are acceleration transducers, fire-alarm sensors, water-level sensors, and magnetic contact sensors. It is also found that the wireless sensor network can deliver sensing data reliably by ad-hoc networking technology. The gateway system that can send the sensing data to server by CDMA (code division multiple access) is developed. Finally, monitoring system is constructed by web service technology, and it is observed that this system can monitor the present state of tunnel without difficulties. Furthermore, the above system provides an alternative to inspect and monitor the tunnel efficiently where the conventional wired system cannot be applied.
-
본 논문의 목표는 지상파 디지털 방송과 데이터 방송 그리고 아날로그 방송을 수신할 수 있는 DTV Set를 구현하고 일체형 디지털 방송 수신기에서 아날로그 방송과 영상을 입력받았을 때 화질저하의 원인이 되는 De-interlace 알고리즘과 3-D Noise를 적절하게 제거할 수 있는 알고리즘에 관한 연구가 목표이다. 또한, 디지털방송의 수신된 컨텐츠를 다른 저장매체로 불법적으로 복사, 재생을 막기 위한 디지털 컨텐츠복사를 방지할수 있는 알고리즘에 관한 연구이다. 현재, 우리나라에서는 기존의 아날로그 방송과 고품질 디지털 방송 서비스를 위한 디지털 방송이 시험적으로 실시되고 있는 상황이다. 이러한 환경하에서 디지털 방송 수신만을 위한 수신기는 아직 시기상조이며 아날로그 방송과 디지털 방송을 동시에 수신할 수 있는 일체형 수신기가 필요한다. 일체형 수신기에서 가장 문제가 되는 부분이 아날로그 방송을 수신하여 디지털 영상으로 인코딩한 후 화면에 뿌려 줄 때 Even Field와 Odd Field를 분리하여 뿌려주기 때문에 많은 영상의 열화가 발생하게 된다. 이러한 문제를 해결하기 위한 많은 방법들이 연구되고 있는 실정이다. 본 연구에서 사용된 시스템을 간략하게 소개하면 디지털 방송 수신을 위한 SoC 로는 Zoran의 G9 Ellete 채택하였고 아날로그 영상의 Decoder로는 AMI의 ADV7401을 선택하였다. 이에 대한 Operating System는 Real-Time OS인 Thread-X를 선택하였다.
-
This paper describes a article how to protect from illegal indiscriminate copy of digital broadcasting content using DRM and CCI. With the start of terrestrial / satellite digital broadcast and the preparation of Digital Cable broadcast, we can view HD digital contents through the various channel. Also we can record, play, redistribute digital contents in PVR. The protection of Digital Contents Right became of the important issue to protect CopyRight. In this paper, we implement a manager that prevents indiscriminate digital contents redistribution of the digital broadcast contents. For protection of Digital contents Right, we use BF(Broadcast Flag) and CCI (Copy Control Information) which we can control viewing or copy digital contents with.
-
The most sensitive part of the installed optical cable is the optical loss variation of the splicing point according to the environmental changes. This paper presents the details of the experimental results of the external environmental changes on optical loss, such as bending, temperature variation, temperature variation after water osmosis and variation. Through the bending test of optical fiber, rapid increase of optical loss was measured within the diameter of 30mm. The result of optical loss variation within the temperature range of
$-30^{\circ}C{\sim}60^{\circ}C$ is less than 0.02dB. It was confirmed that the maximum optical loss increased up to 0.2dB in case of water osmosis within the temperature range of$-40^{\circ}C{\sim}80^{\circ}C$ . There is small optical loss variation of 0.01dB under the 1mm vibration test. The experimental results of this paper can be used as the reference data for the design of the optical fiber cable splicing enclosure to protect the optical loss variation due to environmental changes. -
통신용 지하 관로 자재로는 주로 100mm관(PVC관, FC관)과 50mm관(FC관)이 사용되고 있으며, 이들 관자재의 품질은 관로 시공 품질 뿐 아니라 케이블 포설을 위한 선로 구성에 큰 영향을 미치고 있어, 관자재의 품질 확보는 매우 중요하다고 할 수 있다. 관자재의 품질 성능을 나타내는 방법으로는 편평시험(5% 및 100% 변형하중)과 충격시험 결과를 많이 사용하고 있으나, 관로 시공 현장에서 이러한 성능 시험을 한다는 것은 현실적으로 불가능하여, 대부분의 현장에서는 관자재의 두께나 무게와 같은 물성치 측정으로 품질관리를 하고 있다. 이에 본 논문에서는 관자재의 물성치와 품질 성능간 상호 관계를 분석한 후, 상관성이 높은 항목들을 도출함으로써, 관종 별의 관자재의 물성치와 품질 성능간에는 상관성이 매우 높은 인자들이 있다는 것을 규명하였으며, 이를 통하여 관자재의 물성치 만으로도 품질 성능을 객관적으로 판단할 수 있는 근거를 제시하였다. 이를 이용하여 관로 시공 현장에서 관자재 품질관리와 시공 품질 향상에 활용할 수 있도록 하였다.
-
가입자망 구간에서의 최종적인 목표라 할수있는 FTTH를 실현시키기 위해서 다양한 FTTH 가입자 전송장비가 개발되고 있으며, IP-TV 서비스를 비롯한 시간이동방송과 네트웍기반의 예약녹화기능 등 IP기반의 여러가지 영상서비스 개발이 상용화 단계에 있지만 이러한 서비스를 수용하기 위해 서는 가입자 댁내까지 광케이블이 인입되어야 한다. 본 논문에서는 가입자 댁내까지 광케이블을 인입시키기 위해 건축된지 오래 경과되고 구내 통신설비환경이 열악한 기존공동주택(아파트)을 대상으로 광케이블을 댁내로 인입시키기 위한 방법과 시험 구축한 결과에 대하여 언급하였다.
-
최근 일본에서 발생한 지진이 우리나라에 직접적인 영향을 끼치는 등 더 이상 우리나라도 지진에 안전한 나라가 아니라는 것이 입증되고 있으며, 과도한 지진 발생시 통신두절에 따른 파급효과를 감안할 때, 이제는 본격적으로 통신시설물에 대한 내진대책을 강구할 필요가 있다. 통신시설물은 크게 통신빌딩(전화국 건물), 옥내시설(통신설비, 전원설비, 기계설비), 옥외시설(통신구, 관로 및 맨홀, 철탑, 위성안테나, 전주 등)로 구분하는데, 통신빌딩을 제외하고는 확실한 내진규정이 없는 실정으로 지진에 가장 민감한 시설로 옥내시설의 통신설비인 장치(랙)으로 알려져 있다. 따라서, 본 논문에서는 치국의 장치(랙)에 대한 내진실험 및 기준을 고찰하였으며, 이를 토대로 우리나라에서 적용할 수 있는 장치(랙)의 내진성 확보 방안을 제시하였다.
-
통신시설은 풍수해(태풍, 호우), 화재, 지진 등의 수많은 위험에 직/간접적으로 노출되어 있어 피해가 발생하게 되면 작게는 개인의 통신서비스 중단으로부터 크게는 국가의 중추신경 마비는 물론 사회적 혼란을 야기시킬 수 있는 중요한 시설로써 충분한 내재성이 확보되어야 있어야 하며, 각종 재해 발생시에도 통신수단의 확보가 중요하므로 확실한 재해대책이 강구되어 있어야 한다. 따라서, 본 논문에서는 자연재해가 심한 일본의 통신시설에 대한 재해대책을 고찰하므로서, 우리나라의 통신시설에 대한 재해 대책 수립의 방향을 제시하였다.
-
홈 게이트웨이가 가져야 하는 기능에 대한 요구사항을 분석하고 통신사업자의 관점에서, QoS 기능과 IP 주소변환 기능을 중심으로 세부적인 스위칭 칩의 기능과 성능을 규정하였다. QoS 기능, 패킷 필터링 기능, 그리고 IPv6 주소체계 도입 등과 같이 급변하는 네트워크의 요구사항을 유연하게 수용하여, 칩의 기능과 성능을 수정하거나 추가할 수 있도록 패킷프로세서 기반으로 스위칭 칩을 설계하였으며, 홈 게이트웨이의 구성을 단순화하기 위해 스위칭 칩의 패킷 메모리와 룩업 메모리를 칩 내부에 내장하였다. 그리고 칩의 설계를 검증하기 위해 FPGA를 이용하여 6포트 스위칭 칩으로 구현하여 기능 및 성능시험을 수행하였다. NAT, Flow에 따른 패킷 분류 및 패킷 변경, SPQ, DWRR과 같은 스케줄링 등의 시험을 통하여 설계한 칩의 기능과 성능을 확인하였다.
-
The personal digital recorder is a consumer electronics device that records television shows to a hard disk in digital format. In this paper, we propose an implementation method of personal digital recorder for HDTV. The proposed personal recorder includes CPU and system control modules, graphics and display module, audio DSP module, digital I/O module, NIM module, graphic software library, and embedded software modules for providing a lot of personal digital recorder functions such as live or reserved recordings, browsing of recorder content list, trick lay and time shifting. Especially, combining trick play with time shifting makes much more convenient functions such as pausing live TV, instant replay of interesting scenes, and skipping advertising.
-
For most of the measuring methods of traditional control theory, measuring equipments are located at the output of the system to measure quantities transformed from non-electrical form into electrical one. This method helps us to define the value of parameters to be measured, but it has limitation because it can only assess the efficiency of a movement process. That means we can not understand the inner kinetics which is the essence of the system. In the modern control theory, states of system are considered as the feedback to the control process, which helps us to assess the elements in the inside of the system. In this paper, we survey methods for estimating states being not exposed to the correct measurements. Using this method, we also suggest an application for giving an estimate of the traffic on the LSPs to adapt the network configuration for changing traffic conditions.
-
본 논문에서는 SoC 공정에 적용 가능한 spiral 인덕터의 특성에 대해 다루었다. 일정한 크기의 인덕터에서 턴 수의 변화에 따른 인덕턴스와 Q-factor의 변화를 보았다. HFSS 프로그램을 사용하여 턴 수와 선로의 폭이 같은 조건하에서 사각형 구조와 팔각형 구조를 갖는 인덕터의 인덕턴스와 Q-factor의 ?냅? 계산하였다. 사각형 구조와 팔각형 구조 모두 선로 폭 보다는 턴 수가 증가할수록 인덕턴스가 증가하였다. 턴 수가 증가할수록 Q-factor의 값은 사각형 구조는 감소한 반면 팔각형 구조는 증가하였다. spiral과 실리콘 사이에 PGS(Patterned Ground Shield)를 삽입하여 인덕턴스 및 Q-factor의 변화를 비교 분석하였다. 그 결과 PGS의 사용으로 사각형 구조와 팔각형 구조에서 턴 수에 따라 Q-factor의 값이 구조에 따라 서로 다른 방향으로 증감하는 것을 확인할 수 있었다.
-
In this paper, we deal with EMI Analysis on Microstrip with Defected Ground plane. Specially, we investigate reflection, transmission, crosstalk, radiated emission on Microstrip with Defected Ground plane structure. And investigates undesired effects on various defected ground plane such as ground with split, slot, short end and open end gap. To analyze reflection, transmission and crosstalk of microstrip with defected ground plane, we used concept of the microstrip to slot line transition model. Besides, investigate radiated emission using FDTD Commercial tools such as CST MW
-
This paper describes a measurement method for electromagnetic field strength of power-line communications(PLC) modem. First it outlines the technology used in PLC modems, and the technical regulation being offered to the technology, from the point of view of its effect on electromagnetic compatibility (EMC). The radio spectrum needs protection from other interferers, and there is a regime in place to provide this protection. Difficulties in achieving compatibility between the requirements for radio protection and the requirements for operation of the PLC modem mean that there is no consensus as yet as to how PLC modem components can be made compliant with EMC requirements globally. It is concluded that there is a measurement method according to CISPR standards which satisfy requirements in domestic regulation.
-
High Frequency에서 회로를 해석할 때 기존의 Full-wave Analysis Method와는 다른 Topological Analysis Method에 기반한 BLT equation을 도입하여 새로운 해석을 시도해본다. 이 해석방법은 기존의 방법과는 다르게 회로를 junction과 node로 구분하여 회로 방정식을 만들어 해석을 하는 새로운 방식이다. 이 논문에서는 간단한 회로를 제작하여 BLT equation과 기존의 Simulation Tool을 사용한 해석과 실제 실험결과와 비교하면서 BLT equation을 검증하고, 실제적인 적용 회로를 선정하여 해석을 시도하였다.
-
In this paper electromagnetic topology (EMT) is used to analyze the lumped components on printed circuit boards (PCBs). It is difficult to obtain desirable results about the electromagnetic coupling problems by using a numerical or an experimental method on complex systems. The EMT can be considered as a helpful method to the analysis of electromagnetic interference / electromagnetic compatibility (EMI/EMC) problems in the complex system. To verify the validity of this method, three types of the PCBs mounting a simple circuit are fabricated and experimented.
-
We present a ring hybrid balun with additional two
${\lambda}/4$ short stubs that offers excellent amplitude and phase balance performance. The phase difference which is essentially occurred in$180^{\circ}$ ring hybrid is compensated by a${\lambda}/4$ short stub in one output port. To compensate the amplitude imbalance inherent in the ring hybrid, the series resistance will be added to the second stub which is connected to another output port. The measured balun shows that phase imbalance is less than$2.5^{\circ}$ and magnitude imbalance is less than 0.2dB over a 1.75-2.25 GHz. -
This paper introduce a different-type voltage-controlled oscillator (VCO) for PLL frequency synthesizer, And also the architecture of a high speed low-power-consumption CMOS dual-modulus frequency divider is presented. It provides a new approach to high speed operation and low power consumption. The proposed circuits simulate in 0.35 um CMOS standard technology.
-
본 논문에서는 Moment 법을 이용한 안테나 해석 프로그램에 대해 다룬다. Delaunay 삼각화 알고리즘에 근거하여 pre-processor를 구현한다. Moment법을 이용하여 main-processor를 구현한다. S-parameter를 주파수 영역과 Smith Chart에 표시하고, 방사패턴을 다양한 각도에서 확인 할 수 있도록 post-processor를 구현한다. 해석 결과의 신뢰성을 위해 20GHz 에서 동작하는 고 이득 및 고지향성을 갖는 마이크로스트립 패치 안테나 어레이를 설계하고 이를 제작 및 측정한다. 측정결과와 상용 툴의 결과와 구현한 프로그램의 결과를 비교 및 분석한다.
-
본 논문에서는 안테나와 미국 PCS대역(1.85GHz-1.99GHz) FEM(Front End Module)을 결합하여 하나의 패키지로 구현하는 것을 연구하였다. FEM의 크기를 고려하여 안테나의 크기를 작게 만들고 단말기에 내장하기 위해 PIFA(Planar Inverted F Antenna)형식의 안테나를 선택하였다. 안테나의 지지를 위해 비유전율 2의 캐리어를 사용하였고, 안테나와 FEM간의 상호 간섭을 막기 위해 도체로 차폐시켰다. 유한요소법(Finite Element Method)로 모의 실험을 하여 안테나를 설계하고 실제 제작하여 모의 실험결과와 비교하였다. 제작한 안테나를 FEM과 결합, 기판을 제작하여 FEM의 이득을 측정하였다.
-
In this paper, two
$4{\times}4$ rectangular patch array antennas operated at 20 GHz are implemented for the satellite communication. Two$2{\times}2$ sub-arrays are designed and used for the design of$4{\times}4$ patch array. The sixteen patch antennas and microstrip feeding line are printed on the single-layered substrate. The spacing between the array elements is chosen to be$0.736{\lambda}$ . The HPBW(Half Power Beam Width) of the$4{\times}4$ microstrip patch array is 17.01 degrees in the E-plane and 17.71 degrees in the H-plane with a gain of 11.6dB in the experimental results. The HPBW of the recessed$4{\times}4$ microstrip patch array is 18.66 degrees in E-plane and 17.12 degrees in the H-plane with a gain of 12.55dB in the experimental results. -
Folded lines are applied to design a compact microstrip ring hybrid. Using the proposed structure we achieve both significant size reduction and good harmonic suppression with the same results of conventional ring hybrid at 2.41GHz. Including the third harmonic frequency, up to 11GHz band harmonics are suppressed to -20dB. The size of the proposed ring-hybrid is reduced to one forth of the conventional ring hybrid. The measured frequency responses agree well with simulated ones.
-
A new method is presented to design RF filters without the Similarity Transform of their coupling coefficient matrix as circuit parameters which is very tedious due to pivoting and deciding rotation angles needed during the iterations. The transfer function of a filter is directly used for the design and its desired form is derived by the optimized rational-function fitting technique. A 3rd order Coaxial Lowpass filter and an 8th order dual-mode elliptic integral function response filter are taken as an example to validate the proposed method.
-
In this paper, we present a design procedure of high linearity LNA using CMOS technology. To enhance the low linearity of the inherent CMOS transistor, we adopt the modified derivate superposition with adding external capacitor. The simulation of the designed LNA shows
$IIP_3$ of +12-dBm, power gain of 13.8-dB, noise figure of 1.75-dB over the 900 MHz UHF RFID frequencies. The circuit draws the current of 4.2 mA from 1.8-V supply voltage. -
In this paper, a tunable image rejection filter using two varactors is developed for mobile convergence. The filter is fabricated on a 0.25um substrate. ESD Pad is embedded to prevent damage caused by electrostatic discharge(ESD). Bias voltages are at WCDMA(2.1GHz). WiBro(2.3GHz), and WLAN(2.45) are 0.5V, 0.95V and 1.8V respectively. And the image rejection rations are more than 28dB at each band and insertion losses are less than 2dB at each band.
-
In this paper, a small size,
$7{\times}6mm^2$ , Low Noise Amplifier(LNA) using LTCC process was fabricated with multi-layer structure for 2.4GHz wireless LAN. The measured results demonstrate that the bandwidth is 130 MHz, and the operating frequency is from 2.39GHz to 2.52GHz. The power gain is above 7.3 dB in the operating frequency range and the gain flatness is 0.5 dB. The maximum S11 is -4 dB and the maximum S22 is -7.5 dB. The noise figure is less than 1.83 dB. The measured power gain, S11 and S22 were had poorer performance than the simulation results. The reason for this discrepancy is that the input and output matching was not performed exactly. However, the noise figure of the LTCC low noise amplifier is better than simulation result. It is found that it is possible to fabricate a LTCC low noise amplifier in a small size. -
In this paper we present a cryptanalysis of the generalized patchwork algorithm under the assumption that the attacker possesses only a single copy of the watermarked audio. In the scheme, watermark is inserted by modifying randomly chosen DCT values in each block of the original audio. Towards the attack we first fit low degree polynomials (which minimize the mean square error) on the data available from each block of the watermarked content. Then we replace the corresponding DCT data of the at-tacked audio by the available data from the polynomials to construct an attacked audio. The technique nullifies the modification achieved during watermark embedding. Experimental results show that recovery of the watermark becomes difficult after the attack.
-
HD(High Density) 방송의 시작됨에 따라 광대역 멀티미디어 서비스에 대한 관심이 고조되고 있다. 광대역 멀티미디어 서비스를 하기 위한 전송 매체로 광선로를 이용한 댁내 전송 방식인 FTTH(Fiber To The Home)이 주목받고 있고 특히 AON(Active Optical Network)에 비해 구축, 유지 보수비용에 장점을 가지고 있는 PON을 이용한 방식이 선호되고 있다. PON을 이용한 표준으로 현재 IEEE802.3AH Group에서 표준 완료 된 Gigabit Ethernet PON 있으나 링크 장애에 대한 안정성 고려가 빠져 있다. 이에 본 논문은 멀티미디어 서비스에서 중요시되는 링크 장애에 대한 안정성 확보를 위한 GE-PON Link Protection 방안을 제시하며 OPNET Simulation을 구현하였다.
-
In this paper, we present interfaces for IPMP services on MPEG Multimedia Middleware (M3W). For supporting normative IPMP framework based on MPEG-2/4 IPMPX, M3W IPMP tool interfaces are defined and far supporting MPEG-21 IPMP, REL and other related protective functions, M3W trust management interfaces are. Through the proposed interfaces, IPMP can be easily implemented under various environments and experimental results show some implementation examples.
-
In this paper, we propose a new real-time traffic monitoring scheme for the BcN, the RBC algorithm and investigate its operation. We implemented RBC algorithm and constructed the testbed and we confirmed the performance for this. The simulation result shows that traffic monitoring log size is reduced remarkably by using the RBC. An operation hour is reduced and a feedback support of Real-time is possible also. Consequently, RBC algorithm confirmed we are fit for Real-time TE plan for BcN.
-
In order to enhance receive sensitivity in noisy environment, the previous initial synchronization method of GPS receiver for reference stations adopts not only the coherent integration method but also the non-coherent integration method. However, the previous GPS initial synchronization method causes the non-coherent integration loss, which is a dominant factor among the signal acquisition losses in noisy environment. And the non-coherent integration loss increases with the strength of noise signal. In this pa-per, a GPS initial synchronization method is proposed to enhance receive sensitivity of GPS receiver for reference stations in noisy environment. This paper presents that the proposed GPS initial synchronization method suppresses the non-coherent integration loss. Furthermore, with regard to the mean acquisition time, it is shown that the number of the search cells of the proposed GPS initial synchronization method is much fewer than that of the previous GPS initial synchronization method.
-
In the examination of Steam Generator (SG) tube in Nuclear Power Plant (NPP) Eddy Current Testing (ECT) probes play an Important role in detecting the defects. Bobbin probe and Rotating Pancake Coil (RPC) probe is usually used for the inspection of SG tube. Bobbin probe is good at high speed inspection, but ability of detection of circumferential defect is very weak. On the contrary RPC probe, which moves for inspection in the direction of axial and circumferential simultaneously, has very slow inspection speed, but it was excellent detection capability fur small cracks, which is hardly detected by bobbin probe. Many examinations of SG tube examination of NPP are achieved during short period. Therefore, solution about this must develop probe of new form for examination performance and examination time shortening of other probe. In this paper, analyzed technological present condition of Bob-bin probe and RPC probe been using in Nondestructive Testing (NDT) for SG tube defect detection and Appeared about background theory and view of developed probe newly.
-
As the concept of Ubiquitous City has become an important issue, we need to have a voice in the field of privacy. The Ubiquitous Computing revolution, it is achieved a physical space and an intelligent union of cyber space in the space where an off-line space was integrated with on-line. It is combined with a life space naturally, and Ubiquitous creates a new integrated space. The space is the opportunity space that is limitless as soon as it is the unknown world that mankind was not able to experience yet. According to the recent papers and studies, Privacy or Personal Information sector is mentioned as a major problem for Ubiquitous Computing Society. Therefore, this paper checks Ubiquitous City, the present privacy concept and situation of currently proceeding Ubiquitous computing environment. Also, The main purpose of this paper is to analyze the concepts privacy, personal information. Thus this paper treated the analysis of case, technological or social issue, problem and solution, competing values of privacy and so on.
-
In the H.264/AVC standard, intra prediction increases the coding efficiency of intra macroblocks and by applying rate-distortion optimization to each macroblock, it is possible to choose Inter or Intra encoding adaptively. This sort of encoding scheme, however, increases encoding complexity dramatically and causes troubles in practical applications of the real-time mobile environment. In order to decrease the complexity, variety of methods is proposed but most of those take only its current block into consideration for selecting candidate modes which naturally causes degradation in PSNR (Peak Signal to Noise Ratio). The proposed fast intra mode decision finds the candidate modes by analyzing transformed coefficients of neighboring blocks stored in the buffer at the encoder stage of input sequences. We verify this proposed scheme in complexity, PSNR and bit-rate.
-
Using M-ary QAM and PSK, various modulation methods are researched so far. In this paper, a new constellation method of
$4L^2$ -PSK that normalized circular multi-layer method is proposed with the advantage of those modulation methods. These replacements of signal points complement weak points of an nonlinear radius increment as a layer increases in M-ary QAM and a low efficiency in PSK compared with QAM. But,$4L^2$ -PSK have some problems that in the power efficiency and difference of BER in each layer, So in this paper suggest that advanced$4L^2$ -PSK also. -
This paper, suggest the Rrecord Management solution for unified RFID leader System based on WindowsCE. The unified RFID Reader System consider of RFID Module, GPS Module, CPU Module, WLAN(or CDMA) Module and DB into Local DB and Remote DB for of effective Record Management Systems.
-
In this paper, a remote screen control by mobile networks on embedded system is implemented. For this system a server program is ported on the embedded system connected with internet. And on the side of a mobile phone, a client program is ported using GVM. The embedded system can display the text and image from the mobile phone on its LCD. In the implemented embedded system the text and image data from GVM emulator is sent to the system for display on its LCD. The realization of the proposed embedded system can display the text :md image from a working mobile phone.
-
대부분의 컬러 영상들은 코드북의 일부분만으로 표현할 수 있는 영상의 영역이 상당히 크므로 이러한 특징을 이용하는 효율적인 Reversible 워터마킹 기법을 제안한다. 팔레트(컬러맵) 영상에서의 워터마킹 기술에 대한 연구는 많이 있지만 Reversibility에 대한 관심은 상대적으로 낮았다. 제안하는 기법은 가상적으로 확장한 코드북에 의한 압축 영역에서 동작한다. 확장된 코드북은 높은 Payload 용량을 가진다. Reversibility를 구현하면서 왜곡(Distortion)과 삽입용량(Embedding capacity)사이의 절충점을 실험을 통해 보인다.
-
Advent of the new European satellite positioning system, Galileo will result in development of new satellite receivers such as, GPS/Galileo dual mode receiver. Furthermore, a new GNSS satellite receiver would be required to be self-reconfigured to certain navigational environments like, indoor, high interference, integrity, etc. In this paper, design and implementation issue of a FPGA based flexible GNSS receiver which gets navigation solution using L1 band signals of GPS and Galileo simultaneously is addressed.