In the present paper, the flow distribution in the hot air drying chamber of a sizing machine was numerically analyzed with respect to the geometries of the intake duct to obtain the more uniform flow distribution in the chamber. The result shows that the velocity distribution in the inlet of the chamber was significantly dependent on the the geometry of the intake duct. The degree of the non-uniformity in the chamber was reduced as the incident angle of the intake duct became to be smaller.

The Chitin Thiocarbonate-Fe(II)-H2O2 redox initiator system was investigated for the graft copolymerization of acrylonitrile(AN) and acrylic acid(AA) monomers onto chitin powder. The reactions with vinyl monomers onto chitin were carried out under various the graft copolymerization conditions to elucidate the polymerization behavior in terms of graft yield. Reactions of chitin-acrylonitrile graft copolymer with hydroxyl amine hydrochloride and those with sodium hydroxide were conducted in order to obtain chitin-(amidoxime-co-acrylonitrile) and chitin-(acrylate-co-acrylamide) graft copolymers, respectively. The reaction efficiency was observed to depend on the alkali concentration, time, temperature, and the reactant concentrations. The prepared chitin derivatives were evaluated to find potential applications for use in wastewater treatments for adsorption and desorption of heavy metal ions as well as acidic and basic dyes.

Cabon fiber of general purpose was prepared from coal tar pitch modified with 10% benzoquinine(BQ) at 380C for 3 hours. Such a modified pitch raised the softening of the pitch from 85C to 271C at the yield of 40%. The modified pitch was spun smoothly at a rate of 480m/min into a fiber of 20um diameter. The fiber was stabilized stepwise at 236C (5C/min) and 312C (1C/min) for 3 hours each. Both carbonized and graphitized fibers exhibited tensile strength of 570MPa which appears large enough as a precursor for active carbon fiber. The activated carbon fiber prepared exhibited relatively high surface area of 2062m2/g at 76% burn-off and rather narrow distribution pore size of 20A.

지방족 탄화수소를 방향족계 탄화 수소로 개질 시키는 석유화학 공정에서 얻어지는 탄소수 10개 이상의 방향족 화합물(원유의 0.1%, C10+)을 촉매 염화알미늄(AlCl3)과 공촉매 nitrobenzene을 이용하여 축중합시켜 바람직한 특성을 갖는 석유계 핏치를 제조하였다. 제조된 핏치는 선택된 공촉매의 두 농도(20, 30wt.%)에 따라서 다른 화학적 구조 및 열안정성을 나타내었다. 즉 높은 공촉매 농도에서 축중합이 더 진행되어 탄화수율이 높은 것으로 밝혀졌다. 축중합이 더 진행되었던 공촉매30wt.% 핏치는 500C 탄화 및 2400C 흑연화 시 공촉매 20wt.% 사용한 것에 비해서 배향성이 낮은 것이 X-ray 및 라만 분석을 통해서 밝혀졌다. 이 두 가지 특성을 갖는 탄소를 1000C에서 열처리하여 잔극을 제조한 후 충방전 실험을 행하였고, 공촉매 20wt.%의 핏치로 부터 제조된 탄소를 218mAh/g 충방전 효율이 100%, 30wt.% 공촉매로 제조된 핏치로 부터 얻은 탄소는 235mAh/g, 98%의 충방전 효율을 나타내었다.

방사속도를 500~5,500 m/min까지 변화시켜 만든 Poly(Ethylene 2,6-Naphthalenedicarboxylate)(PEN) 섬유의 Morphology 및 결정화거동을 DSC, XRD 및 Synchrotron Radiation을 이용하여 조사하였다. 밀도 및 복굴절률을 측정하여 방사속도가 증가함에 따라서 as-spun fiber의 구조를 살펴보았다. 또 DSC의 1차 승온과정으로부터 미연신사의 승온결정화 개시온도를 관찰하였으며 ㅡㅇ온결정화과정으로부터 결정화속도를 측정하였다. XRD 및 광가속도기를 이용하여 방사속도에 따른 섬유의 미세구조를 관찰하였으며 온도가 올라감에 따라 결정형태 및 결정화거동이 어떻게 달라지는지 확인하였다.

A series of thermoplastic polyurethane copolymers were prepared from polypropyleneglycol(PPG, MW 3000), 1,4-butanediol, Isophorone diisocyanate(IPDI) and dibutyltin dilaurate(BBT) as catalyst. Studies have been made on the effects of molar ratio of isocyanate /polyol/chain extender on the properties such as tensile and thermal properties. By varying the ration of hard to soft segments, TPU ranging from soft elastomeric polymer to relatively hard elastoplastics and be obtained. The storage modulus and glass transition temperature of TPU increased with increasing the hard segment content.

A series of UV-curable polyurethane acrylate ionomer were synthesized from isophorone diisocyanate(IPDI), poly(tetramethylene ether glycol)(PTMG), 2,2-bis(hydroxymethyl)propionic acid (CMPA), triethylamine(TEA), 2-hydroxy ethyl acrylate (HEA), and dibutyl tin dilaurate (DBT) as a catalyst. 2,2-dimethoxy-2-phenyl acetophenone(DMPAP) was used as a photoinitiator. The films of UV-cured polyurethane acylate ionomer were prepared by casting the formulated materials onto a glass plate at room temperature and cured using a medium pressure mercury lamp (80 W/cm, max = 365nm). Effects of DMPA content, molecular weight of PTMG and degree of neutralization on the properties were invesigated. It is found that the storage modulus increased with increasing DMPA content. The glass transition temperature of sample A shifted to higher temperature as the content of DMPA was increased. Tensile modulus also increased with increasing DMPA content. Modulus and Tg decreased with increasing molecular weight of PTMG form 650 to 2000. With increasing the degree of nutralizaion, ionomers exhibited improved modulu.

다관능성 에폭사이드 PPE(Polyglycerol Polyglycidyl Ether)를 양모섬유에 처리하였을 때 부가반응의 특성을 고찰하였다. 에폭사이드 PPE에 의한 부가반응이 촉매작용을 하는 NaSCN 존재하에서 이관능성 EGDE보다 높은 부가율을 얻을 수 있었다. 에폭사이드 부가반응은 고온에서 반응이 잘 일어나며 에폭사이드 처리욕의 pH는 반응 초기 급격히 상승했다가 이후 점차 초기 값까지 안정화된다. 처리한 양모섬유를 FTIR의 KBr-pellet법과 ATR법에 의해 분석하여 absorbance ratio를 비교하였을 때 부가반응은 표면으로의 그라프트 반응이 우세함을 알 수 있었으며 이러한 결과는 SEM 관측을 통하여 확인할 수 있었다. Performic acid/Ammonia solubility를 에폭사이드 처리 양모섬유에 적용하여 용해도 변화를 보았을 때 부가된 양이 많을수록 용해도 값이 감소하며 특히 15.6%를 중심으로 용해도 변화가 둔화되었다. 아미노산 분석으로 에폭사이드가 반응한 아미노산이 cystine임을 알 수 있었으며 단백질 사슬간에 가교반응이 이루어졌음을 확인할 수 있었다.

To study antimicrobial activities of Impatiens balsamina, its leaf and stem was extracted by methanol and water. The extracts were tested their microbial inhibition activities against several microorganisms, staphylococcus aureus KCTC 1928, Escherichia coli KCTC 1116, Klebsiella pneumoniae KCTC 2690, Trichophyton mentagrophytes KCTC 6316. The methanol extract and water extract of the leaf and stem didn't show the inhibition effect on E. coli but showed the inhibition effect against the ohter 3 species of the microorganisms tested. The extract of leaf showed higher inhibition than the extract of stem. And the methanol extract showed higher inhibition than the water extract.

To study Antimicrobial activities of wool and silk dyed by Impatiens balsamina extract with concentraion and times of dyeing, its leaf and stem was extracted by water. Wool and silk dyed by extracts were their microbial inhibition activities against Staphylococcus aureus KCTC 1928. The more concentration, The more times of dyeing their microbial inhibition activities were increased. Fabrics dyed by leaf estracts were higher microbial inhibition activities than fabrics dyed by stem extracts. Silk dyed by the leaf and stem extracts were higher microbial inhibition activities than wool dyed by the leaf and stem extracts. the more dye uptake, microbial inhibition activities of dyed fabrics were incresed.