• JSTS:Journal of Semiconductor Technology and Science
• /
• 제15권3호
• /
• pp.365-373
• /
• 2015

We propose a simple and compact thyristor-based neuron circuit. The thyristor exhibits bi-stable characteristics that can mimic the action potential of the biological neuron, when it is switched between its OFF-state and ON-state with the help of assist circuit. In addition, a method of inter-neuron connection with synaptic devices is proposed, using double current mirror circuit. The circuit utilizes both short-term and long-term plasticity of the synaptic devices by flowing current through them and transferring it to the post-synaptic neuron. The double current mirror circuit is capable of shielding the pre-synaptic neuron from the post synaptic-neuron while transferring the signal through it, maintaining the synaptic conductance unaffected by the change in the input voltage of the post-synaptic neuron.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제15권6호
• /
• pp.658-663
• /
• 2015

In the previous work, we have proposed an integrate-and-fire neuron circuit and synaptic device based on the floating body MOSFET [1-3]. Integrate-and-Fire(I&F) neuron circuit emulates the biological neuron characteristics such as integration, threshold triggering, output generation, refractory period using floating body MOSFET. The synaptic device has short-term and long-term memory in a single silicon device. In this paper, we connect the neuron circuit and the synaptic device using current mirror circuit for summation of post synaptic pulses. We emulate spike-timing-dependent-plasticity (STDP) characteristics of the synapse using feedback voltage without controller or clock. Using memory device in the logic circuit, we can emulate biological synapse and neuron with a small number of devices.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제14권6호
• /
• pp.755-759
• /
• 2014

We propose an integrate-and-fire neuron circuit and synaptic devices with the floating body MOSFETs. The synaptic devices consist of a floating body MOSFET to imitate biological synaptic characteristics. The synaptic learning is performed by hole accumulation. The synaptic device has short-term and long-term memory in a single silicon device. I&F neuron circuit emulate the biological neuron characteristics such as integration, threshold triggering, output generation, and refractory period, using floating body MOSFET. The neuron circuit sends feedback signal to the synaptic transistor for long-term memory.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제17권2호
• /
• pp.174-179
• /
• 2017

We designed the CMOS analog integrate and fire (I&F) neuron circuit for driving memristor based on resistive-switching random access memory (RRAM). And we fabricated the RRAM device that have $HfO_2$ switching layer using atomic layer deposition (ALD). The RRAM device has gradual set and reset characteristics. By spice modeling of the synaptic device, we performed circuit simulation of synaptic device and CMOS neuron circuit. The neuron circuit consists of a current mirror for spatial integration, a capacitor for temporal integration, two inverters for pulse generation, a refractory part, and finally a feedback part for learning of the RRAM. We emulated the spike-timing-dependent-plasticity (STDP) characteristic that is performed automatically by pre-synaptic pulse and feedback signal of the neuron circuit. By STDP characteristics, the synaptic weight, conductance of the RRAM, is changed without additional control circuit.

• 센서학회지
• /
• 제18권2호
• /
• pp.128-134
• /
• 2009

Integrated circuit of a new neuron chain with a synapse function for Hodgkin-Huxley model which is a good electrical model about a real biological neuron is implemented in a $0.5{\mu}m$ 1 poly 2 metal CMOS technology. Pulse type neuron chain consist of series connected current controlled single neurons through synapses. For the realization of the single neuron, a pair of voltage mode oscillators using operational transconductance amplifiers and capacitors is used. The synapse block which is a connection element between neurons consist of a voltage-current conversion circuit using current mirror. SPICE simulation results of the proposed circuit show 160 mV amplitude pulse output and propagation of the signal through synapses. Measurements of the fabricated pulse type neuron chip in condition of ${\pm}2.5\;V$ power supply are shown and compared with the simulated results.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제14권4호
• /
• pp.383-390
• /
• 2014

This paper presents an excitatory CMOS neuron oscillator circuit design, which can synchronize two neuron-bursting patterns. The excitatory CMOS neuron oscillator is composed of CMOS neurons and CMOS excitatory synapses. And the neurons and synapses are connected into a close loop. The CMOS neuron is based on the Hindmarsh-Rose (HR) neuron model and excitatory synapse is based on the chemical synapse model. In order to fabricate using a 0.18 um CMOS standard process technology with 1.8V compatible transistors, both time and amplitude scaling of HR neuron model is adopted. This full-chip integration minimizes the power consumption and circuit size, which is ideal for motion control unit of the proposed bio-mimetic micro-robot. The experimental results demonstrate that the proposed excitatory CMOS neuron oscillator performs the expected waveforms with scaled time and amplitude. The active silicon area of the fabricated chip is $1.1mm^2$ including I/O pads.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1998년도 춘계학술대회 논문집
• /
• pp.55-58
• /
• 1998

Recently, neural networks with self-adaptability like human brain have attracted much attention. It is desirable for the neuron-function to be implemented by exclusive hardware system on account of huge quantity in calculation. We have proposed a novel neuro-device composed of a MFSFET(ferroelectric gate FET) and oscillation circuit with CUJT(complimentary unijuction transistor) and PUT(programmable unijuction transistor). However, it is difficult to preserve ferroelectricity on Si due to existence of interfacial traps and/or interdiffusion of the constitutent elements, although there are a few reports on good MFS devices. In this paper, we have simulated CUJT and PUT devices instead of fabricating them and composed oscillation circuit. Finally, we have resented, as an approach to the MFSFET neuron circuit, adaptive learning function and characterized the elementary operation properties of the pulse oscillation circuit.

• 전자공학회논문지B
• /
• 제33B권2호
• /
• pp.131-139
• /
• 1996

This paper describes the chaotic neuron model to represent the complicated states of brain and analyzes the dynamical responses of chaotic neuron such as periodic, bifurcation, and chaotic phenomena which are simulated iwth numerical analysis. Next, the chaotic neuron circuit is implemented w ith the analog electronic devices. The transfer function of chaotic neuron is given by summed the linear and nonlinear property. The output function of chaojtic neuron is designed iwth the two cMOS inverters and a feedback resistor. By adjusting the external voltage, the various dynamical properties are demonstrated. In addition, we construt the chaotic neural networks which are composed of the interconnection of chaotic neuroncircuit such as serial, paralle, and layer connection. On the board experiment, we proved the dynamci and chaotic responses which exist in the human brain.

• 한국지능시스템학회논문지
• /
• 제24권5호
• /
• pp.457-461
• /
• 2014

생물학적 신경 세포의 모델링을 위한 펄스타입 실리콘 뉴런 회로를 $0.18{\mu}m$ CMOS 공정을 이용하여 반도체 집적회로로 설계하였다. 제안하는 뉴런 회로는 입력 전류신호를 위한 커패시터 입력단과, 출력 전압신호 생성을 위한 증폭단 및 펄스신호 초기화를 위한 MOS 스위치로 구성된다. 전압신호 입력을 전류신호 출력으로 변환하는 기능의 시냅스 회로는 몇 개의 PMOS와 NMOS 트랜지스터로 이루어지는 범프회로를 사용한다. 제안하는 뉴런 모델의 검증을 위하여, 2개의 뉴런과 시냅스가 직렬연결된 뉴런체인을 구성하여 SPICE 모의실험을 실시하였다. 모의실험 결과, 뉴런신호의 생성과 시냅스 전달특성의 정상적인 동작을 확인하였다.

• 한국지능시스템학회논문지
• /
• 제16권5호
• /
• pp.627-634
• /
• 2006

CMOS 인버터 특성곡선의 기울기를 조절하는 방법과 y축으로 이동할 수 있는 방법을 제안하였다. 기울기의 변경과 y축으로 이동은 트랜지스터의 문턱 값을 조절하는 방법을 사용하였다. 그리고 특성곡선의 중심에서는 두 트랜지스터 모두 포화영역에 머물러 있음에 착안하여, 단극성 뉴런의 특성곡선을 만드는 방법을 제안하였다. 제안된 방법은 회로레벨의 시뮬레이션을 통해 검증하였으며, 회로레벨의 시뮬레이션은 OrCAD사의 PSpice(Professional Simulation Program with Integrated Circuit Emphasis)를 사용하였다.