• Advances in nano research
• /
• v.3 no.1
• /
• pp.49-54
• /
• 2015

The structure represents symmetrical metal electrode (gate 1) - front $SiO_2$ layer - n-Si nanowire FET - buried $SiO_2$ layer - metal electrode (gate 2). At the symmetrical gate voltages high conductive regions near the gate 1 - front $SiO_2$ and gate 2 - buried $SiO_2$ interfaces correspondingly, and low conductive region in the central region of the NW are formed. Possibilities of applications of nanosize FETs at the deep inversion and depletion as a distributed capacitance are demonstrated. Capacity density is an order to ${\sim}{\mu}F/cm^2$. The charge density, it distribution and capacity value in the nanowire can be controlled by a small changes in the gate voltages. at the non-symmetrical gate voltages high conductive regions will move to corresponding interfaces and low conductive region will modulate non-symmetrically. In this case source-drain current of the FET will redistributed and change current way. This gives opportunity to investigate surface and bulk transport processes in the nanosize inversion channel.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.41 no.7
• /
• pp.1-6
• /
• 2004

For MOSFET devices with nanometer range gate length, accurate extraction of effective gate length is highly important because transistor characteristics become very sensitive to effective channel length. In this paper, we propose a new approach to extract the effective channel length of nanometer range MOSFET by Capacitance Voltage(C-V) method. The effective channel length is extracted using gate to source/drain capacitance( $C_{gsd}$). It is shown that 1/$\beta$ method, Terada method and other C-V method are inadequate to extract the accurate effective channel length. Therefore, the proposed method is highly effective for extraction of effective channel length of 100nm CMOSFETs.s.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.15 no.2
• /
• pp.312-317
• /
• 2015

In this paper, the RF characteristics of multi-finger MOSFETs were improved by decreasing the parasitic capacitance in spite of increased gate resistance in a 90-nm CMOS technology. Two types of device structures were designed to compare the parasitic capacitance in the gate-to-source ($C_{gs}$) and gate-to-drain ($C_{gd}$) configurations. The radio frequency (RF) performance of multi-finger MOSFETs, such as cut-off frequency ($f_T$) and maximum-oscillation frequency ($f_{max}$) improved by approximately 10% by reducing the parasitic capacitance about 8.2% while maintaining the DC performance.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.14 no.5
• /
• pp.525-536
• /
• 2014

Recently, the first generation of mass production of FinFET-based microprocessors has begun, and scaling of FinFET transistors is ongoing. Traditional capacitance and resistance models cannot be applied to nonplanar-gate transistors like FinFETs. Although scaling of nanoscale FinFETs may alleviate electrostatic limitations, parasitic capacitances and resistances increase owing to the increasing proximity of the source/drain (S/D) region and metal contact. In this paper, we develop analytical models of parasitic components of FinFETs that employ the raised source/drain structure and metal contact. The accuracy of the proposed model is verified with the results of a 3-D field solver, Raphael. We also investigate the effects of layout changes on the parasitic components and the current-gain cutoff frequency ($f_T$). The optimal FinFET layout design for RF performance is predicted using the proposed analytical models. The proposed analytical model can be implemented as a compact model for accurate circuit simulations.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.7
• /
• pp.71-81
• /
• 2014

In this paper, the performance variations of tri-gate FinFET are analyzed for different fin shapes and source/drain epitaxy types using a 3D device simulator(Sentaurus). If the fin shape changes from a rectangular shape to a triangular shape, the threshold voltage increases due to a non-uniform potential distribution, the off-current decreases by 72.23%, and the gate capacitance decreases by 16.01%. In order to analyze the device performance change from the structural change of the source/drain epitaxy, we compared the grown on the fin (grown-on-fin) structure and grown after the fin etch (etched-fin) structure. 3-stage ring oscillator was simulated using Sentaurus mixed-mode, and the energy-delay products are derived for the different fin and source/drain shapes. The FinFET device with triangular-shaped fin with etched-fin source/drain type shows the minimum the ring oscillator delay and energy-delay product.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.4
• /
• pp.49-55
• /
• 2015

The inaccuracy of the bias-dependent gate-drain overlap capacitance $C_{gdo}$ simulation in original BSIM4 and BSIM4 macro model using a diode is analyzed in detail. It is found that the accuracy of the macro model is better than of the BSIM4. However, the macro model cannot be used in the linear region. In order to remove the inaccuracy of the conventional models, a new BSIM4 macro model with a physical bias-dependent $C_{gdo}$ equation is proposed and its accuracy is validated in the full bias range.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.7 no.3
• /
• pp.196-208
• /
• 2007

An analytical model is proposed for an optically controlled Metal Semiconductor Field Effect Transistor (MESFET), known as Optical Field Effect Transistor (OPFET) considering the diffusion fabrication process. The electrical parameters such as threshold voltage, drain-source current, gate capacitances and switching response have been determined for the dark and various illuminated conditions. The Photovoltaic effect due to photogenerated carriers under illumination is shown to modulate the channel cross-section, which in turn significantly changes the threshold voltage, drainsource current, the gate capacitances and the device switching speed. The threshold voltage $V_T$ is reduced under optical illumination condition, which leads the device to change the device property from enhancement mode to depletion mode depending on photon impurity flux density. The resulting I-V characteristics show that the drain-source current IDS for different gate-source voltage $V_{gs}$ is significantly increased with optical illumination for photon flux densities of ${\Phi}=10^{15}\;and\;10^{17}/cm^2s$ compared to the dark condition. Further more, the drain-source current as a function of drain-source voltage $V_{DS}$ is evaluated to find the I-V characteristics for various pinch-off voltages $V_P$ for optimization of impurity flux density $Q_{Diff}$ by diffusion process. The resulting I-V characteristics also show that the diffusion process introduces less process-induced damage compared to ion implantation, which suffers from current reduction due to a large number of defects introduced by the ion implantation process. Further the results show significant increase in gate-source capacitance $C_{gs}$ and gate-drain capacitance $C_{gd}$ for optical illuminations, where the photo-induced voltage has a significant role on gate capacitances. The switching time ${\tau}$ of the OPFET device is computed for dark and illumination conditions. The switching time ${\tau}$ is greatly reduced by optical illumination and is also a function of device active layer thickness and corresponding impurity flux density $Q_{Diff}$. Thus it is shown that the diffusion process shows great potential for improvement of optoelectronic devices in quantum efficiency and other performance areas.

• ETRI Journal
• /
• v.34 no.4
• /
• pp.633-636
• /
• 2012

A dynamic analysis of an amorphous silicon (a-Si) thin film transistor liquid crystal display (TFT-LCD) pixel is presented using new a-Si TFT and liquid crystal (LC) capacitance models for a Simulation Program with Integrated Circuit Emphasis (SPICE) simulator. This dynamic analysis will be useful when predicting the performance of LCDs. The a-Si TFT model is developed to accurately estimate a-Si TFT characteristics of a bias-dependent gate to source and gate to drain capacitance. Moreover, the LC capacitance model is developed using a simplified diode circuit model. It is possible to accurately predict TFT-LCD characteristics such as flicker phenomena when implementing the proposed simulation model.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2004.05b
• /
• pp.661-663
• /
• 2004

In this paper, we have investigated characteristics of C-V for double gate MOSFET with main gate and side gate by the variation of side sate length and side gate voltage. Main gate voltage is changed from -5V to +5V. We know that characteristics of C-V is good under the condition of LSG=70nm, VSG=3V, VD=2V. We have analyze characteristics of device by ISE-TCAD.

• Proceedings of the IEEK Conference
• /
• 2003.07b
• /
• pp.695-698
• /
• 2003

This paper presents a Si power LDMOSFET for power amplifiers in the 1.8-2.2GHz frequency range for the base station of personal communication systems. To improve the cut-off frequency, the proposed Si power LDMOSFET has small gate to drain capacitance by shielding the electric fields with extended source electrode and forming the field oxide structure in drain region. The proposed Si power LDMOSFET can be used for a power amplifier and it has 32% of power added efficiency and 39.5dBm of output power when the supply voltage is 28V and the operating frequency is 1.9GHz.