• 한국전기화학회:학술대회논문집
• /
• 한국전기화학회 2004년도 춘계총회 및 학술발표회
• /
• pp.34-34
• /
• 2004

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2005년도 춘계학술발표대회 및 제8회 신소재 심포지엄 논문개요집
• /
• pp.53-53
• /
• 2005

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1994년도 춘계학술대회 논문집
• /
• pp.145-146
• /
• 1994

A SOI technology is promising for micromachining: high temperature operation, the fabrication easiness of sophisticated and 3D microstructures, radiation hardness, integrated sensors etc. This paper describes reviews of SOI technologies, and their applications microsensors and microactuators

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제14권3호
• /
• pp.274-283
• /
• 2014

In this paper, the epi layer of npn SOI HBT with n+ buried layer has been studied through Sentaurus process and device simulator. The doping value of the deposited epi layer has been varied for the npn HBT to achieve improved $f_tBV_{CEO}$ product (397 GHzV). As the $BV_{CEO}$ value is higher for low value of epi layer doping, higher supply voltage can be used to increase the $f_t$ value of the HBT. At 1.8 V $V_{CE}$, the $f_tBV_{CEO}$ product of HBT is 465.5 GHzV. Further, the film thickness of the epi layer of the SOI HBT has been scaled for better performance (426.8 GHzV $f_tBV_{CEO}$ product at 1.2 V $V_{CE}$). The addition of this HBT module to fully depleted SOI CMOS technology would provide better solution for realizing wireless circuits and systems for 60 GHz short range communication and 77 GHz automotive radar applications. This SOI HBT together with SOI CMOS has potential for future high performance SOI BiCMOS technology.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제14권6호
• /
• pp.712-717
• /
• 2014

The performance of npn SiGe HBT on thin film SOI is investigated at 32 nm technology node by applying body bias. An n-well is created underneath thin BOX to isolate the body biased SOI HBT from SOI CMOS. The results show that the HBT voltage gain and power gain can be programmed by applying body bias to the n-well. This HBT can be used in variable gain amplifiers that are widely used in the receiver chain of RF systems. The HBT is compatible with 32 nm FDSOI technology having 10 nm film thickness and 30 nm BOX thickness. As the breakdown voltage increases by applying the body bias, the SOI HBT with 3 V $V_{CE}$ has very high $f_tBV_{CEO}$ product (839 GHzV). The self heating performance of the proposed SOI HBT is studied. The high voltage gain and power gain (60 dB) of this HBT will be useful in designing analog/RF systems which cannot be achieved using 32 nm SOI CMOS (usually voltage gain is in the range of 10-20 dB).

• 한국전기전자재료학회논문지
• /
• 제20권6호
• /
• pp.491-495
• /
• 2007

This paper has demonstrated the electrical properties of SiGe pMOSFETs fabricated on both bulk-Si and PD SOI substrates. Two principal merits, the mobility increase in strained-SiGe channel and the parasitic capacitance reduction of SOI isolation, resulted in improvements in device performance. It was observed that the SiGe PD SOI could alleviate the floating body effect, and consequently DIBL was as low as 10 mV/V. The cut-off frequency of device fabricated on PD SOI substrate was roughly doubled in comparison with SiGe bulk: from 6.7 GHz to 11.3 GHz. These experimental result suggests that the SiGe PD SOI pMOSFET is a promising option to drive CMOS to enhance performance with its increased operation frequency for high speed and low noise applications.

• 한국진공학회지
• /
• 제14권2호
• /
• pp.91-96
• /
• 2005

양성자 주입과 웨이퍼접합기술을 접목한 ion-cut기술로서 SOI 웨이퍼를 제조하는 기술을 개발하였다. SRIM 전산모사에 의하면 일반 SOI 웨이퍼 (200nm SOI, 400nm BOX) 제조에는 65keV의 양성자주입이 요구된다. 웨이퍼분리를 위한 최적 공정조건을 얻기 위해 조사선량과 열처리조건(온도 및 시간)에 따른 blistering 및 flaking 등의 표면변화를 조사하였다. 실험결과 유효선량범위는 $6\~9times10^{16}H^+/cm^2$이며, 최적 아닐링조건은 $550^{\circ}C$에서 30분 정도로 나타났다. RCA 세정법으로서 친수성표면을 형성하여 웨이퍼 직접접합을 수행하였으며, IR 조사에 의해 무결함접합을 확인하였다 웨이퍼 분리는 예비실험에서 정해진 최적조건에서 이루어졌으며, SOI층의 안정화를 위해 고온열처리($1,100^{\circ}C,\;60$분)를 시행하였다. TEM 측정상 SOI 구조결함은 발견되지 않았으며, BOX(buried oxide)층 상부계면상의 포획전하밀도는 열산화막 계면의 낮은 밀도를 유지함을 확인하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 D
• /
• pp.1671-1673
• /
• 1999

일반적으로 SOI 소자에 대한 연구는 film 두께. 채널길이 그리고 doping 농도에 따라 폭넓게 연구되어 왔다. 제안한 소스/드레인 비대칭 SOI 소자는 일반적인 LDD SOI 소자와 비교하여 항복전압은 거의 비슷한 반면. 전류 구동능력은 훨씬향상된 소자를 구현 시킬수 있었다. 비대칭 SOI 소자를 설계하기 위하여 최적화된 공정조건을 모의 실험용 TCAD Simulator (SILVACO)를 이용하여 검증하였다. 검증된 공정 변수를 이용하여 모의 실험을 해보았더니 항복전압과 전류 구동능력에서 좋은 특성을 나타내었다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 하계학술대회 논문집
• /
• pp.95-96
• /
• 2009

A fully depleted capacitorless 1-transistor dynamic random access memory (FD 1T-DRAM) based on a sSOI strained-silicon-on-insulator) wafer was investigated. The fabricated device showed excellent electrical characteristics of transistor such as low leakage current, low subthreshold swing, large on/off current ratio, and high electron mobility. The FD sSOI 1T-DRAM can be operated as memory device by the floating body effect when the substrate bias of -15 V is applied, and the FD sSOI 1T-DRAM showed large sensing margin and several milli seconds data retention time.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1998년도 추계종합학술대회 논문집
• /
• pp.553-556
• /
• 1998

The 1-D numerical model and its extraction methodology are suggested and these simulation results for the S-swing as a function of back-gate voltage are well matched with the measured. S-swing characteristics are analyzed using PD-SOI devices with enough deeper regions up to substrates. The PD-SOI device doesn't have to be short channel to see the anomalous subthreshold phenomena based on the back gate bias. This results recommend to operate better SOI device performances by controlling the back gate voltages. So SOI performances will be much optimistic with proper control of the back-gate voltage for the already- proven- high- performance (APHP) SOI VLSIs.