• 한국전기전자재료학회논문지
• /
• 제19권11호
• /
• pp.1000-1004
• /
• 2006

In this paper, thermal stability of Ni-silicide formed on the SOI substrate with $B_{11}$ has been characterized. The sheet resistance of Ni-silicide on un-doped SOI and $B_{11}$ implanted bulk substrate was increased after the post-silicidation annealing at $700^{\circ}C$ for 30 min. However, in case of $B_{11}$ implanted SOI substrate, the sheet resistance showed stable characteristics after the post-silicidation annealing up to $700^{\circ}C$ for 30 min. The main reason of the excellent property of $B_{11}$ sample is believed to be the retardation of Ni diffusion by the boron and bottom oxide layer of SOI. Therefore, retardation of Ni diffusion is highly desirable lot high performance Ni silicide technology.

• 한국전기전자재료학회논문지
• /
• 제20권6호
• /
• pp.487-490
• /
• 2007

In this paper, the formation and thermal stability characteristics of Ni silicide using Ni-V alloy on Boron cluster ($B_{18}H_{22}$) implanted bulk and SOI substrate were examined in comparison with pure Ni for nano-scale CMOSFET. The Ni silicide using Ni-V alloy on $B_{18}H_{22}$ implanted SOI substrate after high temperature post-silicidation annealing showed the lower sheet resistance, no agglomeration interface image and lower surface roughness than that using pure Ni. The thermal stability of Ni silicide was improved by using Ni-V alloy on $B_{18}H_{22}$ implanted SOI substrate.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제5권2호
• /
• pp.83-88
• /
• 2005

The interface-states between the top silicon layer and buried oxide layer of nano-SOI substrate were developed. Also, the effects of thermal treatment processes on the interface-state distributions were investigated for the first time by using pseudo-MOSFETs. We found that the interface-state distributions were strongly influenced by the thermal treatment processes. The interface-states were generated by the rapid thermal annealing (RTA) process. Increasing the RTA temperature over $800^{\circ}C$, the interface-state density considerably increased. Especially, a peak of interface-states distribution that contributes a hump phenomenon of subthreshold curve in the inversion mode operation of pseudo-MOSFETs was observed at the conduction band side of the energy gap, hut it was not observed in the accumulation mode operation. On the other hand, the increased interface-state density by the RTA process was effectively reduced by the relatively low temperature annealing process in a conventional thermal annealing (CTA) process.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 하계학술대회 논문집 Vol.7
• /
• pp.24-25
• /
• 2006

In this study, Ni silicide on the SOI substrate doped B11 is proposed to improve thermal stability. The sheet resistance of Ni-silicide utilizing pure SOI substrate increased after the post-silicidation annealing at $600^{\circ}C$ for 30 min. However, using the proposed B11 implanted substrate, the sheet resistance showed stable characteristics after the post-silicidation annealing up to $700^{\circ}C$ for 30 min.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 추계학술대회 논문집
• /
• pp.11-12
• /
• 2007

The electrical characteristics of strained-SOI wafer were evaluated by using pseudo-MOSFET. The electrical characteristics of sSOI pseudo-MOSFET were superior to conventional SOI device. Moreover, the electrical characteristics were enhanced by forming gas anneal due to reduction of back interface trap density between substrate and buried oxide.

• 센서학회지
• /
• 제11권5호
• /
• pp.294-300
• /
• 2002

In this study, we fabricated thermopile infrared sensor with floating membrane structure. Floating membrane was formed by SOI(Silicon On Insulator) structure. In SOI structure, silicon dioxide layer between top silicon layer and bottom silicon substrate was etched by HF solution, then membrane was floated over substrate. After membrane was floated, thermopile pattern was formed on membrane. By insertion of SOI technology, we could obtain thermal isolation structure easily and passivation process for sensor pattern protection was not required during fabrication process. Then, the amplifier circuit for thermopile sensor was fabricated by using $1.5{\mu}m$ CMOS process. The voltage gain of fabricated amplifier was about two hundred.

• 한국진공학회지
• /
• 제17권2호
• /
• pp.156-159
• /
• 2008

Pseudo-MOSFET 방법을 이용하여 Ge농도에 따른 SiGe-on-Insulator(SGOI) 기판의 특성을 평가하였다. SGOI 기판은 compressive-SiGe / Relaxed-Si / Buried oxide / Si-substrate 구조로 SOI 기판 위에 에피택셜 성장법으로 SiGe층을 형성하였으며 compressive SiGe층의 Ge 농도는 각각 16.2％, 29.7％, 34.3％, 56.5％ 이다. 실험결과 Ge 농도가 증가함에 따라 누설전류가 증가하는 특성을 보였으며 threshold voltage는 nMOSFET의 경우 3V에서 7V로 이동하였으며 pMOSFET의 경우도 -7 V에서 -6 V로 이동하는 특성을 보였다. 급속 열처리 공정 (rapid thermal anneal) 후에 매몰 산화층과 기판 계면간의 스트레스에 의한 포획준위가 발생하여 소자특성이 열화되었지만, $H_2/N_2$ 분위기에서 후속 열처리 공정 (post RTA anneal) 을 통하여 계면 간의 포획준위를 감소시켜 SGOI Pseudo-MOSFET의 전기적 특성이 개선되었다.

• 센서학회지
• /
• 제15권1호
• /
• pp.1-6
• /
• 2006

We fabricated Si nano-wire MOSFET by using the conventional photolithography with a $1.5{\mu}m$ resolution. Si nano-wire was fabricated by using reactive ion etching (RIE), anisotropic wet etching and thermal oxidation on a silicon-on-insulator (SOI) substrate, and its width is 30 nm. Logarithmic circuit consisting of a NMOSFET and Si nano-wire MOSFET has been constructed for application to high-sensitivity image sensor. Its sensitivity was 1.12 mV/lux. The output voltage swing was 1.386 V.