• Journal of Electrical Engineering and Technology
• /
• v.9 no.4
• /
• pp.1343-1348
• /
• 2014

The low frequency noise in Silicon Nanowire Field Effect Transistors is analyzed by characterizing the gate electrode dependence on various geometrical parameters. It shows that gate electrodes have a strong impact in the flicker noise of Silicon Nanowire Field effect transistors. Optimization of gate electrode was done by comparing different performance metrics such a DIBL, SS, $I_{on}/I_{off}$ and fringing capacitance using TCAD simulations. Molybdenum based gate electrode showed significant improvement in terms of high drive current, Low DIBL and high $I_{on}/I_{off}$. The noise power sepctral density is reduced by characterizing the device at higher frequencies. Silicon Nanowire with Si3N4 spacer decreases the drain current spectral density which interms reduces the fringing fields there by decreasing the flicker noise.

• Journal of Convergence for Information Technology
• /
• v.11 no.7
• /
• pp.104-110
• /
• 2021

A novel selective oxidation process has been developed for low source/drain (S/D) series resistance of the fin channel metal oxide semiconductor field effect transistor (MOSFET). Using this technique, the selective oxidation fin-channel MOSFET (SoxFET) has the gate-all-around structure and gradually enhanced S/D extension regions. The SoxFET demonstrated over 70% reduction in S/D series resistance compared to the control device. Moreover, it was found that the SoxFET behaved better in performance, not only a higher drive current but also higher transconductances with suppressing subthreshold swing and drain induced barrier lowering (DIBL) characteristics, than the control device. The saturation current, threshold voltage, peak linear transconductance, peak saturation transconductance, subthreshold swing, and DIBL for the fabricated SoxFET are 305 ㎂/㎛, 0.33 V, 13.5 𝜇S, 76.4 𝜇S, 78 mV/dec, and 62 mV/V, respectively.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.43 no.11 s.353
• /
• pp.1-7
• /
• 2006

3-dimensional(3-D) simulations of ideal double-gate bulk FinFET were performed extensively and the electrical characteristics. were analyzed. In 3-D device simulation, we changed gate length($L_g$), height($H_g$), and channel doping concentration($N_b$) to see the behaviors of the threshold voltage($V_{th}$), DIBL(drain induced barrier lowering), and SS(subthreshold swing) with source/drain junction depth($X_{jSDE}$). When the $H_g$ is changed from 30 nm to 45nm, the variation gives a little change in $V_{th}$(less than 20 mV). The DIBL and SS were degraded rapidly as the $X_{jSDE}$ is deeper than $H_g$ at low fin body doping($1{\times}10^{16}cm^{-3}{\sim}1{\times}10^{17}cm^{-3}$). By adopting local doping at ${\sim}10nm$ under the $H_g$, the degradation could be suppressed significantly. The local doping also alleviated $V_{th}$ lowering by the shallower $X_{jSDE}\;than\;H_g$ at low fin body doping.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.5 no.2
• /
• pp.69-76
• /
• 2005

Interface-trap density, lifetime and Schottky barrier height of erbium-silicided Schottky diode are evaluated using equivalent circuit method. The extracted interface trap density, lifetime and Schottky barrier height for hole are determined as $1.5{\times}10^{13} traps/cm^2$, 3.75 ms and 0.76 eV, respectively. The interface traps are efficiently cured by $N_2$ annealing. Based on the diode characteristics, various sizes of erbium- silicided/platinum-silicided n/p-type Schottky barrier metal-oxide-semiconductor field effect transistors (SB-MOSFETs) are manufactured from 20 m to 35nm. The manufactured SB-MOSFETs show excellent drain induced barrier lowering (DIBL) characteristics due to the existence of Schottky barrier between source and channel. DIBL and subthreshold swing characteristics are compatible with the ultimate scaling limit of double gate MOSFETs which shows the possible application of SB-MOSFETs in nanoscale regime.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.41 no.4
• /
• pp.9-14
• /
• 2004

This paper reports the measurement and analysis of the short channel effects and the punchthrough voltage of SOI-MOSFET with a self-aligned ground plane electrode in the silicon mechanical substrate underneath the buried oxide. When the channel length is reduced below 0.2${\mu}{\textrm}{m}$ it is observed that the threshold voltage roll-off and the subthreshold swing with channel length are reduced and DIBL is improved more significantly in GP-SOI devices than FD-SOI devices. It is also observed from the dependence of threshold voltage with substrate biases that the body factor is a higher in GP-SOI devices than FD-SOI devices. From the measurement results of punchthrough voltage, GP-SOI devices show the higher punchthrough voltages than FD-SOI devices

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.303.1-303.1
• /
• 2014

좋은 전기적 특성을 가지면서 소자의 크기를 줄이기에 용이한 Gate-all-around (GAA) twin Si nanowire field-effect transistors (TSNWFETs)의 연구가 많이 진행되고 있다. Switching 특성과 단채널 효과가 없는 TSNWFETs의 특성은 GAA 구조의 본질적인 특성이다. TSNWFETs는 기존의 single Si nanowire TSNWFETs와 bulk FET에 비하여 Drive current가 nanowire의 지름에 많은 영향을 받지 않는다. 그러나 TSNWFETs의 전체 on-current는 훨씬 작고 nanowire의 지름이 작아지면서 줄어들게 되면서 소자의 sensing speed와 sensing margin 특성의 악화를 가지고 온다. GAA TSNWFETs의 제작 및 전기적 실험에 대한 연구는 많이 진행되었으나, GAA TSNWFETs의 전기적 특성에 대한 이론적 연구는 매우 적다. 본 연구에서는 GAA TSNWFETs의 nanowire 크기에 따른 전기적 특성을 관찰하였다. GAA TSNWFETs와 bulk FET의 전기적 특성을 양자역학을 고려하여 3차원 TCAD 시뮬레이션을 툴을 이용하여 계산하였다. GAA TSNWFETs와 bulk FET의 전류-전압 특성 계산을 통해 on-current 크기, subthreshold swing, drain-induced barrier lowering (DIBL), gate-induced drain leakage를 보았다. 전류가 흐르는 경로와 전기적 특성의 물리적 의미에 대한 연구를 위해 TSNWFETs에서의 전류 밀도, conduction band edge, potential 특성을 분석하였다. 시뮬레이션 결과를 통해 Switching 특성, 단채널 효과에 대한 면역 특성, nanowire의 단면적에 따른 전류 흐름을 보았다. nanowire의 크기가 작아지면서 DIBL이 증가하고 문턱전압과 전체 on-current는 감소하면서 소자의 특성이 악화된다. 이러한 결과는 GAA TSNWFETs의 전기적 특성을 이해하고 좋은 소자 특성을 위한 구조를 연구하는데 많은 도움이 될 것이다.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.5 no.3
• /
• pp.173-181
• /
• 2005

A new two dimensional (2-D) model for the potential distribution of fully depleted short-channel ion-implanted silicon MESFET's has been presented in this paper. The solution of the 2-D Poisson's equation has been considered as the superposition of the solutions of 1-D Poisson's equation in the lateral direction and the 2-D homogeneous Laplace equation with suitable boundary conditions. The minimum bottom potential at the interface of the depletion region due to the metal-semiconductor junction at the Schottky gate and depletion region due to the substrate-channel junction has been used to investigate the drain-induced barrier lowering (DIBL) and its effects on the threshold voltage of the device. Numerical results have been presented for the potential distribution and threshold voltage for different parameters such as the channel length, drain-source voltage, and implanted-dose and silicon film thickness.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.20 no.6
• /
• pp.491-495
• /
• 2007

This paper has demonstrated the electrical properties of SiGe pMOSFETs fabricated on both bulk-Si and PD SOI substrates. Two principal merits, the mobility increase in strained-SiGe channel and the parasitic capacitance reduction of SOI isolation, resulted in improvements in device performance. It was observed that the SiGe PD SOI could alleviate the floating body effect, and consequently DIBL was as low as 10 mV/V. The cut-off frequency of device fabricated on PD SOI substrate was roughly doubled in comparison with SiGe bulk: from 6.7 GHz to 11.3 GHz. These experimental result suggests that the SiGe PD SOI pMOSFET is a promising option to drive CMOS to enhance performance with its increased operation frequency for high speed and low noise applications.

• Journal of Electrical Engineering and Technology
• /
• v.2 no.2
• /
• pp.267-273
• /
• 2007

A depletion-mode MOSFET has been analyzed to evaluate its electrical behavior using a novel 3-D numerical simulation package. The characterizing analysis of the BC MOSFET was performed through short-channel narrow-channel and small-geometry effects that are investigated, in detail, in terms of the threshold voltage. The DIBL effect becomes significant for a short-channel device with a channel length of $<\;3({\mu}m)$. For narrow-channel devices the variation of the threshold voltage was sharp for $<4({\mu}m)$ due to the strong narrow-channel effect. In the case of small-geometry devices, the shift of the threshold voltage was less sensitive due to the combination of the DIBL and substrate bias effects, as compared with that observed from the short-channel and narrow-channel devices. The characterizing analysis of the narrow-channel and small-geometry devices, especially with channel width of $<\;4({\mu}m)$ and channel area of $<\;4{\times}4({\mu}m^2)$ respectively, can be accurately performed only from a 3-D numerical simulation due to their sharp variations in threshold voltages.

• Proceedings of the IEEK Conference
• /
• 2000.06b
• /
• pp.234-237
• /
• 2000

In this paper, a method to implement new Quasi-SOI LDMOSFET is introduced and the electrical characteristics of the device are studied. Key process steps of the device are explained briefly. By performing process and device simulations, electrical characteristics of the device are investigated, with emphasis on the optimization of the tilt angle of p$\^$0/ channel region. The electrical properties of the Quasi-SOI device are compared with those of bulk and SOI devices with the same process parameters. Simulated device characteristics are threshold voltage, off-state leakage current, subthreshold swing, DIBL, output resistance, lattice temperature, I$\_$D/-V$\_$Ds/, and cut-off frequency.