• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.8
• /
• pp.1465-1470
• /
• 2006

This paper presents a design of low power CMOS LNA(Low Noise Amplifier) for 2.4 GHz ZigBee applications that is a promising international standard for short area wireless communications. The proposed circuit has been designed using TSMC $0.18{\mu}m$ CMOS process technology and two stage cascade topology by current reuse technique. Two stage cascade amplifiers use the same bias current in the current reused stage which leads to the reduction of the power dissipation. LNA design procedures and the simulation results using ADS(Advanced Design System) are presented in this paper. Simulation results show that the LNA has a extremely low power dissipation of 1.38mW with a supply voltage of 1.0V. This is the lowest value among LNAs ever reported. The LNA also has a maximum gain of 13.38dB, input return loss of -20.37dB, output return loss of -22.48dB and minimum noise figure of 1.13dB.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.44 no.1
• /
• pp.32-37
• /
• 2007

A DMB CMOS power amplifier (PA) with high efficiency and linearity is present. For this work, a 0.13-um standard CMOS process is employed and all components of the proposed PA are fully integrated into one chop including output matching network and adaptive bias control circuit. To improve the efficiency and linearity simultaneously, an adaptive bias control circuit is adopted along with second harmonic termination circuit at the drain node. The PA is shown a $P_{1dB}$ of 16.64 dBm, power added efficiency (PAE) of 38.31 %, and power gain of 24.64 dB, respectively. The third-order intermodulation (IMD3) and the fifth-order intermodulation (IMD5) have been -24.122 dBc and -37.156 dBc, respectively.

• Journal of electromagnetic engineering and science
• /
• v.5 no.3
• /
• pp.112-116
• /
• 2005

This paper presents a broadband two-stage low noise amplifier(LNA) operating from 3 to 10 GHz, designed with 0.18 ${\mu}m$ RF CMOS technology, The cascode feedback topology and broadband matching technique are used to achieve broadband performance and input/output matching characteristics. The proposed UWB LNA results in the low noise figure(NF) of 3.4 dB, input/output return loss($S_{11}/S_{22}$) of lower than -10 dB, and power gain of 14.5 dB with gain flatness of $\pm$1 -dB within the required bandwidth. The input-referred third-order intercept point($IIP_3$) and the input-referred 1-dB compression point($P_{ldB}$) are -7 dBm and -17 dBm, respectively.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2002.11a
• /
• pp.11-15
• /
• 2002

3 V, 2.46GHz Low Noise Amplifier (LNA) have been designed for standard 0.35$\mu\textrm{m}$ CMOS process with one poly and four metal layers. This design includes on-chip biasing, matching network and multilayer spiral inductors. The single-ended amplifier provides a forward gain of 20.5dB with a noise figure 3.35dB, and an IIP3 of -6dBm while drawing 59mW total Power consumption

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.27 no.1
• /
• pp.50-59
• /
• 2016

This work shows that the design and test results of a power amplifier(PA) with broadband and high linearity for 4G applications in $0.11{\mu}m$ CMOS process. A 1:2-transformer is designed for load impedance matching of PA and a inter-stage matching is implemented for a linearity. A designed PA achieves more than 27.3 dBm of linear output power and 26.1 % of power-added efficiency(PAE) under an adjacent channel leakage ratio(ACLR) of -30 dBc for a LTE 16-QAM 10 MHz signal with a carrier frequency range of 1.8 to 2.3 GHz.

• Proceedings of the IEEK Conference
• /
• 2000.06e
• /
• pp.191-194
• /
• 2000

A 2.4 GHz single ended two stage low noise amplifier(LNA) is designed for Bluetooth application. The circuit was implemented in a standard digital 0.25 $\mu\textrm{m}$ CMOS process with one poly and five metal layers. At 2.4 GHz, the LNA dissipates 34.5 mW from a 2.5V power supply voltage and provides 24.6 dB power gain, 2.85 dB minimum noise figure, -66.3 dB reverse isolation, and an output 1-dB compression level of 8.5 dBm.

• Proceedings of the IEEK Conference
• /
• 2005.11a
• /
• pp.905-908
• /
• 2005

본 논문에서는 class AB opamp 를 채용한 384kHz differential PWM 신호를 입력으로 하는 2-channel stereo audio amplifier 블록을 공급전압 3.3V 조건에서 SMIC 0.18um thick oxide 기술을 이용하여 설계한다. 여기서 class AB opamp 는 공정 변화에 따른 quiescent current가 변하는 것을 최소화하기 위하여 adaptive load 를 사용하며, 전체적으로는 3 차 Butterworth lowpass filter 와 differential-to-single converter 로 구성된 2 개의 audio amplifier 와 출력전압이 ${\frac{1}{2}}Vdd$ 인 common output 블록으로 구성된다. 이러한 설계를 통하여 32ohm 의 저항 load 를 구동할 수 있는 -60dB THD, 전체 quiescent current 2mA 대인 CMOS class AB stereo audio amplifier 를 구현하였다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2013.05a
• /
• pp.349-351
• /
• 2013

This research paper presents a low-power programmable gain amplifier (PGA) to facilitate signal processing of the detection of defects in steel plates. This circuit is able to adjust a gain in the range of 6 to 60dB in 7 steps using different signal types for various defects from hall sensors. The gain of PGA is designed by operating on-resistors of switches and passive components. The proposed PGA ($0.18{\mu}m$ CMOS process with 1.8 supply voltage) showed excellent gain error of less than -0.2dB, and low power consumption of 0.47mW.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.28 no.10
• /
• pp.832-835
• /
• 2017

In this paper, V-band differential low noise amplifier(LNA) using 65-nm CMOS process for high speed wireless data communication is presented. The LNA is composed of 3-stage common-source differential amplifiers with neutralization of feedback capacitances using MOS capacitors and impedance matching utilizing transformers. The fabricated LNA has a peak gain of 23 dB at 63 GHz and 3 dB bandwidth of 6 GHz. The chip area of LNA is $0.3mm^2$ and the LNA consumes 32 mW DC power from 1.2 V supply voltage.

• ETRI Journal
• /
• v.36 no.6
• /
• pp.924-930
• /
• 2014

This paper presents a $0.13{\mu}m$ CMOS 3-level envelope delta-sigma modulation (EDSM) RF signal generator, which synthesizes a 2.6 GHz-centered fully symmetrical 3-level EDSM signal for high-efficiency power amplifier architectures. It consists of an I-Q phase modulator, a Class B wideband buffer, an up-conversion mixer, a D2S, and a Class AB wideband drive amplifier. To preserve fast phase transition in the 3-state envelope level, the wideband buffer has an RLC load and the driver amplifier uses a second-order BPF as its load to provide enough bandwidth. To achieve an accurate 3-state envelope level in the up-mixer output, the LO bias level is optimized. The I-Q phase modulator adopts a modified quadrature passive mixer topology and mitigates the I-Q crosstalk problem using a 50% duty cycle in LO clocks. The fabricated chip provides an average output power of -1.5 dBm and an error vector magnitude (EVM) of 3.89% for 3GPP LTE 64 QAM input signals with a channel bandwidth of 10/20 MHz, as well as consuming 60 mW for both channels from a 1.2 V/2.5 V supply voltage.