In building structure, the story height can be minimized by providing openings in beams which serves for the utility equipments passing through. The dead space in false ceiling thus put to economical use in the form of a substantial reduction in materials and construction cost. In the case of steel structure, there is no critical risk in the structural strength because of reinforcing methods of stiffness and steel plate but in the case of reinforced concrete structure, proper provision should be made in designing these openings, otherwise there is a risk that these opening will possibly weaken the structural strength of the building frame to a critical degree. In this paper, for the numerical analysis of the reinforced concrete beams with circular opening in the web, expecting stress concentration of the circular opening, reinforcing methods were studied. Twenty test pieces with each different reinforcing methods were tested and their resisting forces were defined. From the numerical analysis and test results, the followings were founded;(1)high shear stress distributed around the openings reduce the shearing strength, (2)from the numerical analysis, the maximum tensile stress occurred at opening nodes 1,7, these phenomena were agreed with the test results, (3)reinforcing method around openings have to carried out for stopping diagonal cracks, and (4)both, by steel plate, and wire mesh, are effective reinforcing methods.

The fatigue strength of SM55C has significantly decreased by 83% compared with atmosphere where distilled exists due to strong erosive action of acid fog. The reason is inferred in a way that strong acid erosive material such as acid fog act and give rise to multi-site crack on the surface. Several fatigue clacks occurred under the acid fog repeat the process of division and unification on the surface and form a long non-propagating crack throughout the circumference of experimented steel. However, in the depth, many parts do not show much trace of unification, and the depth is not as big as the one of normal crack shape. 10% of $CaCl_2$ causes strong erosive reaction to material. Then eventually make the life of fatigue shooter. On the other hand, 20% of $CaCl_2$ beings about oxidized material organic crack closing due to weak erosive reaction.

This paper deals with the study on the culling characteristics in ball-end milling process. First of all, the effects of the geometric cutting conditions such as the spindle speed, feedrates on the surface integrity and machining stability were evaluated by the analytical and the experimental approaches. A large amount of experimental sets are performed to evaluate the effects of chatter phenomenon on the machined surface. The optical microscope and the surface roughness measuring machine are used to measure the surface integrity and roughness of the machined surfaces.

Heat loss from the trapezoidal fins haying different upper side slope and that from a rectangular fin are investigated by the three dimensional analytic method. It is shown that the trapezoidal fins having different upper side slope become an approximate rectangular fin by inst adjusting the slope factor. The comparison of the heat loss between a rectangular fin and an approximate rectangular fin is represented as a function of the non-dimensional fin length, fin width and Biot number to make sure that the analysis on the trapezoidal fins having different upper side slope is countable. One of the results is that the relative value of heat loss between a rectangular fin and an approximate rectangular fin is less than 1.5% for given ranges of non-dimensional length and width in case of Bi = 0.1.

A comparison is made of the temperature distribution and heat loss from a trapezoidal profile fin using two different 3-dimensional methods. These two methods are analytical and finite difference methods. In the finite difference method 78 nodes are used for a fourth of the fin. A trapezoidal profile fin being the height of the fin tip is half of that of the fin base is chosen arbitrarily as the model. One of the results shows that the relative error in the total convection heat loss obtained by using 78 nodes in the finite difference method as compared to the heat conduction through the fin root obtained by analytic method seems to be good (i.e., -3.5%

In this paper, a novel overmodulation strategy for space-rector PWM(SYPWM) inverters to utilize dc link voltage fully is presented. The proposed strategy uses the concept of SVPWM based on the zero sequence signal(offset voltage) injection principle. So, by modifying the pole voltage simply, the linear control of inverter output voltage over the whole overmodulation range can be achieved easily. The proposed strategy is so simple that its practical implementation is easy. The validity of the proposed strategy is confirmed by the experimental results.

This paper analyzes the performance of the several types of ACL(Asynchronous ConnectionLess) packets used in Bluetooth according to a BER(Bit Error Rate) and a packet length and proposes an optimal packet type and an optimal size of the packet being able to be used under the given BER. This paper proposes how to obtain the optimal packet type and the optimal size of the packet maximizing the performance measure under the given BER. In addition, this paper shows that the optimal type and size of the packet maximizing the throughput are different from those maximizing the mean transmission time. This occurs because the Bluetooth uses not only one type of packet but also various types of packets.

In this paper, we propose handoff scheme for BT(Bluetooth) IP and define signaling for the handoff scheme. In local area, BT IP use the concept of Cellular IP and the operation property of Bluetooth system. In case of accessing external internet, use the concept of Mobile IP. IP-based Mobility of Bluetooth Terminal provides efficient and rapid mobility in local area and flexibility on the internet.

Barrier is widely used for synchronization in parallel programs. Since the process arrived earlier than others should wait at the barrier, the total processor utilization decreases. In this paper, to find the sources of the barrier waiting time, parallel programs are executed on the various grain sizes through execution-driven simulations. In simulation studies, we found that even if approximately equal amounts of work are distributed to each processor, all processes may not arrive at a barrier at the same time. The reasons are that the different numbers of cache misses and instructions within partitioned grains result in the difference in arrival time of processors at the barrier.

In this work, we have developed a 2 degrees of freedom(DOF) motion simulator that can generate the sensation of motion in a 6 DOF space. The motion base has the DOF of roll and pitch, and the purpose of the motion base is to create the sensation of riding a vehicle in a 3D space by controlling the motion base. The dynamics of the mechanism was analysed and the optimal design of the motion base mechanism has been reached. The prototype motion base mechanism was developed and tested. The multi-axis motion controller(MMC) was used to control the two AC servo meters that drive the roll and pitch motion.

A low cost force./moment sensor that can be used in the robot teaching task is presented. Force Sensing Resistor is used as the transducer. The principle of force/moment detection is explained, the architecture of the sensor is shown, and the measurement of the force/moment is presented. The force/moment sensor shown in this work is not meant to be used in a precise force/moment control, but it is intended to be used in the robot teaching where low accuracy can be tolerated.

This paper presents the development of the I/O Interface for the real time parallel data communication between controller of a six-axis industrial robot(CRS-A460) and an external computer. The proposed I/O Interface consists of the hardware I/O interface and the software that is downloaded to the robot controller and executed by the controller operating system. The constitution of the digital I/O Port for CRS-A460 robot controller and the digital I/O board for IBM-PC are presented as well as the Process Control Program of the robot controller. The developed protocol for the parallel data communication is described. The data communication is tested, and the performance is analysed. In particular, it is shown that the real-time constraint of the robot controller process is satisfied.

A continuous and reliable electrical energy supply is the objective of any power system operation. A transmission line is the part of the power system where faults are most likely to happen. This paler describes the use of wavelet transform for analyzing power system fault transients in order to determine the fault location. Synchronized sampling was made possible by precise time receivers based on GPS time reference, and the sampled data were analyzed using wavelet transform. This paper describes a fault location monitoring system and fault locating algorithm with GPS, DSP processor, and data acquisition board, and presents some experimental results and error analysis.

Power converters are widely used in the applications of servo drives of ac and dc motors and power supplies. For the control of the converters carious control algorithms have been proposed and realized by gating signal generation. Software control shemes are being applied to implement the control algorithms, but analog circuits are still used for the gating signal generation because it requires very fast and precise timing. In this paper the gating signal generation with DSP software are proposed for the three phase to three phase PWM converter. Design procedures and software flowcharts are presented and some experimental waveforms are also presented to verify the proposed algorithms.

Currently, the VHE (suggested for global roaming user to provide personal service environment) implementation scenario is being proposed to realize 3G network requirements. However, developing VHE scenarios are focused on signal flow between node and network, and network and network. this case may result in weakness to protect subscriber's privacy in 3G network which commonly uses visited network. In this paper, we reanalyze a several VHE implementation scenarios for user profile protection, indicate a problem concerning user privacy, and finally, design a procedure to cope with vulnerability in VHE implementation scenario.

This paper proposed for allotment of group key's rekey interval required from secure multicast environment. New group key distribution occurs in two cases: one is periodical update and the other is permitted or unpermitted withdrawal of group member. In later case, the group controller distributes new group key to member except withdrawal member because it can't predict precisely. In former case, the group member who cheated the group can adjust the rekey interval. Using relation between security level, overhead and cost from rekey interval, this paper suggests effective rekey interval allotment through probable performance analysis in large dynamic group.

Linux cluster Server makes a high performance PC cluster system, and provides scalablity and availability as compared with an expensive single server. In this paper, we design and implement a VOD streaming service system to serve video and audio streaming services on the Linux cluster server. Our Streaming server supports the MS Window Media Format based on the RTSP streaming protocol.

There has been a study about the effective multimedia education using a computer following the appearance of a virtual space. Also, there has been an effort to connect the information & communication technology with education. The popular on-line lecture systems are mostly on English lecture sites. However, they just offer the VOD(Video On Demand) services ignoring students' convenience. To improve these week points, we design and implement the multimedia leaching system focusing on an efficient repeat-effect in order that students can control the Media Player by clicking a sentence on a web page. This paper presents the Editor and Player considering students' interest and the effective learning fruits. So users can easily make multimedia materials and use them to improve their English listening skill.

XML is fast emerging as the dominant standard to represent and exchange data in the Web. As the amount of data available in the Web has increased dramatically in recent years, the data resides in different forms ranging from semi-structured data to highly structured data in relational database. As semi-structured data will be represented by XML, XML will increase the ability of semi-structured data. In this paper, we propose an idea for extracting schema in XML document using DTD.

This paper presents techniques for discovering rules with elastic patterns. Elastic patterns are useful for discovering rules from data sequences with different sampling rates. For fast discovery of rules whose heads and bodies are elastic patterns, we construct a suffix tree from succinct forms of data sequences. The suffix tree is a compact representation of rules, and is also used as an index structure for finding rules matched to a target head sequence. When matched rules cannot be found, the concept of rule relaxation is introduced. Using a cluster hierarchy and a relaxation error, we find the least relaxed rules that provide the most specific information on a target head sequence. Performance evaluation through extensive experiments reseals the effectiveness of the proposed approach.

This paper deals with the subsequence searching problem under time-warping. Our work is motivated by the observation that subsequence searches slow down quadratically as the average length of data sequences increases. To resolve this problem, the Segment-Based Approach for Subsequence Searches (SBASS) is proposed. The SBASS divides data and query sequences into a series of segments, and retrieves all data subsequences. Our segmentation scheme allows segments to have different lengths; thus we employ the time warping distance as a similarity measure for each segment pair. For efficient retrieval of similar subsequences, we extract feature vectors from all data segments exploiting their monotonically changing properties, and build a spatial index using feature vectors. The effectiveness of our approach is verified through extensive experiments.

This paper discusses an index-based subsequence matching that supports time warping in large sequence databases. Time warping enables finding sequences with similar patterns even when they are of different lengths. In earlier work, we suggested an efficient method for whole matching under time warping. This method constructs a multidimensional index on a set of feature vectors, which are invariant to time warping, from data sequences. For filtering at feature space, it also applies a lower-bound function, which consistently underestimates the time warping distance as well as satisfies the triangular inequality. In this paper, we incorporate the prefix-querying approach based on sliding windows into the earlier approach. For indexing, we extract a feature vector from every subsequence inside a sliding window and construct a multi-dimensional index using a feature vector as indexing attributes. For query precessing, we perform a series of index searches using the feature vectors of qualifying query prefixes. Our approach provides effective and scalable subsequence matching even with a large volume of a database. We also prove that our approach does not incur false dismissal. To verily the superiority of our method, we perform extensive experiments. The results reseal that our method achieves significant speedup with real-world S&P 500 stock data and with very large synthetic data.

An XML is an markup language which has been focused on the next generation Web programming language. It easily represents the complex structure of a document, and it is possible to provide the access control over each component of an XML document. An implicit authorization technique means that granting an authorization to a node has effect on granting the same implicit authorization to its all descendants. Therefore, it enhances the time for the authorization grant and reduces the memory required for the authorization information. An authorization technique using an intention type and a authorization replacement solves a redundancy problem and decides whether the access is possible or the authorization conflict occurs at the first attempt.

In recent years, the predominant part in telecommunications is mobile communications. The next generation network is extending today's voice-only mobile networks to multi-service networks. ATM Network is possible to carry such multi-media traffic and it will be expect to use wireless ATM for the future mobile access network. One of manly important aspects for the performance of wireless ATM is the Medium Access Control (MAC) protocol. The MAC protocol must be able to satisfyingly handle the different ATM services (CBR, VBR, ABR and UBR) with their radically different performance requirements. Additionally, the MAC protocol must be able to cope with the complex radio environment where fading, multi-path propagation interference and burst-errors further complicate the situation. In this paper, a dynamic slot allocation algorithm in wireless ATM is proposed for an efficient channel sharing/media access at the MAC layer. We use equivalent capacity in the allocation of slots for VBR traffic which is variable along the time. It is simple and effective slot allocation method for VBR service. In particular, we consider the slot allocation of a session consisted of several connections for requirement of multimedia traffic. Simulation shows that the cell loss ratio is reduced by re-allocation of extra slots in Mobile Terminal (MT).

e-book is digital contents using IT technology instead of paper. It is carried in Internet and displayed wish Viewer of PC, PDA or terminal. The Open eBook specification is to provide a specification for representing the content of electronic books to these viewers. The specification is based on HTML and XML, the same core languages that define the World Wide Web, and is designed to allow publishers and authors to deliver their material in a single format. In this paper, we design and implement the viewer that can support OEB(Open eBook) standard. Viewer is composed parser part and display part. In audition, we add some functions - the book shelf, the bookmark and the dictionary - for convenience of readers.

For the power line communication, we studied its characteristic impedance, noise characteristics, loss characteristics and the coupling circuit between the communication MODEM and power lines. As the results of the experiments, we concluded that the power line impedance in a house varied in the wide range because the electric systems generate the current and voltage hamornic noises.

This paper describes the power line proximity warning device for mobile crane by using the induced voltage measurement method. A mobile crane worker can be easily exposed to dangerous electrical shock and the electrocution while this are working at near the high-voltage electrical lines. In this paper, the derivation electric-potential of the power lines are simulated and microprocessor-based detecting device and transmitter/receiver modules are introduced to show a solution for the dangerous mobile crane working environment.

The effect of Mo underlayer on the magnetic properties of CoCrTa/Cr films deposited on glass substrates were investigated. The coercivity increased and the coercivity squareness decreased by introducing Mo underlayer. The coercivity increase was attributed to the increase of in-plane c-axis orientation and magnetic isolation of Co grains deposited on Cr/Mo underlayer. The decrease of coercivity squarenesses seemed to be caused by the increase of magnetic isolation. The increase of magnetic isolation of Co grains was attributed to the diffusion of Mo atoms into grain boundaries of Co films and the physical isolation of Co grains. The coercivity of CoCrTa/Cr/Mo showed maximum values at Mo thickness of $400{\AA}$. The appearance of the maximum coercivity at that thickness was attributed to the development of strong $Co(10{\bar{1}}0)$ and $Co(10{\bar{1}}1)$ preferred orientation.

U-turn and P-turn as well as left-turn restriction exist in real traffic network. the optimal route should be selected for considering these using shortest path algorithms. But, the traditional algorithms have some limitations to use for considering there. The objective of this paper is to modify Dijkstra algorithm in order to find the optimal path in real traffic network. The continuous three nodes are used to check turn-restrictions and exclude these from and optimal path. A virtual connection is used to consider U-turn and P-turn.

The objective of this paper is to develop the optimal path algorithm for dynamic route guidance system in advanced traveler information system (ATIS). The travel time is forecasted in each path between network nodes. Floyd-Warshall algorithm is used to find the optimal route based on this forecasted travel time in dynamic traffic network. This algorithm is modified to apply the real traffic network that has left-turn restriction, U-turn, and P-turn. A big value is assigned to one of arcs in turn restriction and a virtual node is used to consider U-turn and P-turn for Floyd-Warshall algorithm.

This research is focused on an improvement of additional value of high grade limestone. To obtain the basic data of precipitated calcium carbonate(PCC), studies of physical properties of limestone, calcination and hydration characteristics, the characteristics to manufacture quick lime, hydrated lime, ground calcium carbonate and precipitated calcium carbonate were performed. In the carbonation process, formation of rombohedral must be kept under $10^{\circ}C$ for reaction. Although the temperature of reaction of lime milk was limited under $30^{\circ}C$ for a colloidal PCC manufacture, over $50^{\circ}C$ for spindle type PCC. The recommended reaction conditions for colloidal PCC are $20^{\circ}C$ of reaction temperature, 4% of $Ca(OH)_2$ concentration, 1000rpm of stirring rate and 200ml/min of $CO_2$ gas flow rate.

The separation of rare earths minerals is very difficult because of their similar chemical properties. The rare earth minerals are used as the mixed rare earth minerals or the misch metal without separation to each element. However, the high purity rare earths are recently produced commercially to each element so they there are used as the materials for high tech. Based on the characterization results for the raw minerals, we have developed a combined process containing gravity seperation, magnetic seperation and flotation. The result obtained from this study is monazite concentration of TREO grade 69.11% and Recovery 56.02%.

Blast-vibration tests were carried out to determine the effects of the number of free face on the level of blast vibration. Frequency chatacteristics were also examined by using FFT analysis. To check the effects of the number of free face, charge weight per delay, drilling length, burden and space were applied uniformly and the number of free face was only changed from one to four. The results from tests were checked by regression analysis and K-value.

In this study, we prepared nano-sized $TiO_2$ particles for various process variables by the diffusion flame reactor and we collected $TiO_2$ particles by thermophoresis. It is found that the size of $TiO_2$ particles increases, as the flame temperature or the inlet $TiCl_4$ concentration increase or the total gas flow rate decreases. We investigated the photo-degradation of phenol wish the prepared $TiO_2$ particles. We found the optimum amounts of $TiO_2$ photocatalysts for our experimental apparatus and investigated the photo-degradation efficiencies of phenol, changing the process variables such as size of $TiO_2$ photocatlysts, phase ratio of rutile/anatase, concentration of phenol, input ratio of $O_2$. Degradation efficiencies of phenol were almost 95% in 15 minutes for the standard conditions of our experiments.

In this study, we analyzed the $NO_X$ removal effiency by the low temperature plasma process and investigated the effect of several process variables. Most of NO is converted into $NO_2$ and, later, into $HNO_3$ which reacts with $NH_3$ to form $NH_4NO_3$ particles. As the frequency of appling voltage increases, as the applied voltage increases or as the residential time increases, removal efficiency of the NO supplied initially increase. The removal efficiency of $NO_X$ also increases with the increase of $NH_3$ supplied.

The amount used of aggregates for concrete is increasing rapidly since the mid-1980s in Korea. The natural gravels from river are already displaced with crushed stone, and use of crushed sand as a substitute of natural river sands, also, is getting increased day by day. This paper is presented for mixture of high strength concrete using crushed sands. Mixing design of concretes are various water-cement ratios(w/c) such as 25%, 40%, 55% and different replacement ratio of crushed sands to natural sands such as 0%, 20%, 40%, 60%. As a results, it has been shown that compressive strength of concretes with w/c lower than 40% and 25% is higher than $400kgf/cm^2$ and $600kgf/cm^2$ respectively.

This paper is experimental results of investigating the efficiency of horizontal vacuum drainage system. Effects of size and shape of drain on horizontal vacuum drainage were studied. Model tests in the laboratory with soft marine clay were carried out with drain pipe of having three different diameters and PBD (Plastic Board Drain) of strip shape so that consolidation settlement of soft clay due to applied vacuum pressure, amount of discharge, ground settlement and distributions of pore pressure and undrained shear strength were measured during testing. From results of model test, amount of discharge due to vacuum pressure was increased with the diameter of pipe drain whereas the drain efficiency of pipe in per unit area of drain surface was decreased with diameter of pipe. The rate of discharge per unit time was reduced very fast with diameter of pipe. Settlement of ground surface with time was increased with diameter of pipe as a result of increase of discharge to drain pipe.

This study is a research result of investigating causes of landslides occurred at Uijongbu in Kyonggi Province, Korea. For works of this research, informations and data about landslides occurred at the site, geological and topographical informations were collected to analyze causes of landslides, and mapping landslides was performed by using results of field investigation. Data about rainfall during occurrence of landslides around Uijongbu was also used to find the effect of intense rainfall on occurrence of landslides. Based on informations obtained from field investigation and collected data, the scale and the pattern of landslides were analyzed and influencing factors on landslide such as intensity and duration of rainfall, topography, geologic condition, geotechnical engineering properties of ground, forestry were investigated statistically to find causes of landslides. On the other hands, for geotechnical engineering respects, slope stability analysis was performed for the typical sites chosen from the sites where the landslides occurred, using informations obtained from detailed topographical survey with total stations, field reconnaissance and results from laboratory tests.

For soils with high void ratios, the inverse method of utilizing results obtained from centrifuge model test was used to find the constitutive relation of effective stress - void ratio - permeability whereas conventional oedometer test and constant rate of strain consolidation test were also used to fine its relation at ranges of relatively low void ratio. Results of column test about settlement of interface and pore pressure and distribution with time were compared with numerically estimated values to confirm such a constitutive relation as obtained from the inverse method. Consolidational settlement in dredged and reclaimed ground, where the consolidation was in progress, was predicted by using the numerical technique implemented with the finite strain consolidation theory.

In this study, a series of fatigue tests are carried out in order to estimate quantitatively the characteristics of fatigue crack growth rate for high strength steels of SM570, POSTEN60, and POSTEN80 steel, that is, the influence on fatigue crack growth rate according to the welding line, the characteristics of fatigue crack growth according to the welding method and the kinds of steel, and the characteristics of fatigue crack growth for base metal, heat affected zone and weld metal. From the test results, in case that the notch if parallel to welding line, it knows that the retardations of fatigue crack growth rate in crack tip at early stage increase remarkably than in case that the notch is perpendicular to welding line due to compressive residual stress. And the characteristics of fatigue crack growth rate according to welding method are that the dispersion of fatigue crack growth rate in case of FCAW method is smaller than that of SAW method. Also, it knows that the fatigue crack growth rate converges in high stress intensity factor range.

This study was carried out to screen the effective polymeric additives preventing wall growth during mycelial submerged cultivation of Ganoderma. lucidum. Effects of additives on mycelial growth and exo-polysaccharide (EPS) production in flask culture and jar fermenter system under 3 different pH processes were investigated, and changes of mycelial morphology were also examined. From flask culture of G. lucidum with additives of different concentrations, 0.1%(w/v) polyacrylic acid was effective for EPS production. As the polyacrylic acid of 0.1%(w/v) was added in medium, wall growth of G. lucidum mycelium grown in jar fermenter system could be protected. The addition of 0.1%(w/v) polyacrylic acid to medium was also improved the mycelial growth and EPS production in the later of submerged culture G. lucidum and no changes of mycelial morphology were observed.

This study characterizes the growth of white rot fungi Phanerochaete chrysosporium IFO 31249) and lignin peroxidase(LiP) activity in different submerged culture media. P. chrysosporium was grown in the form of pellet of various sizes from a spore inoculum under shaking liquid culture condition. While the growth of mycelia was higher under the nitrogen-sufficient culture than under the nitrogen-limited culture, ligninase activity was relatively lower. The lignin peroxidase appeared in nitrogen-limited culture and was suppressed by excess nitrogen. High level(40U/l) of lignin peroxidase activity was obtained in the growth medium containing 1.5mM veratryl alcohol, a secondary metabolite of P. chrysosporium. Lignin peroxidase production was not observed under conditions of nitrogen sufficiency or in balanced media, suggesting that control parameters could increase the activity by manipulating the secondary metabolism.

This research was carried out to find out the possibility of using Faraday's law in analyzing the electrocoagulation system. Bench-scale reactor equipped with aluminum electrode plates was operated using synthetic wastewater which received sodium chloride for conductivity adjustment. Phosphate was added to the wastewater to induce the precipitation with Al. The amount of aluminum dissolved from the electrodes could be predicted by Faraday's law with a difference less than 5%. This difference was greater at a higher electric current, probably due to the increased solution temperature. However, effect of pH on the dissolution of the aluminum was negligible. The result of this study suggested that the operating condition of electrocoagulation system could be developed using the Faraday's law when the pollutant concentration is given.