In this paper, we describe an isolated words recognition system for Korean isolated digits based on a voiced -unvoiced decision algorithm and a frequency domain analysis. The algorithm first performs a voiced-unvoiced decision procedure for the begtinning part of each uttered work using the normalized log energy and zero crossing rate as decision parameters. Based on this decision,. each word is assigned to one of two classes. In order to identify the uttered word within each class, a dynamic time warping algorithm is applied using formant frequencies as the basis for the distance measure. We exploit a pole-zero analysis to measure formant frequencies in each frame. We have observed that pole-zero analysis can provide more accurate estimation of formant frequencies than analysis based on poles only. Experimental recognition rates of 97.3% illustrating the performance of the recognition system was achieved.

A parallel-plate waveguide with a slit in its upper plate is analysed. An integral equation is formulated for the equivalent magnetic current and solved by the conventional moment method. Numerical results are presented for the magnetic current, reflection and transmission coefficients, a normalized radiated power in the slit, and equivalent circuit parameters. The equivalent circuit parameters are an useful quantities in the study of the E-plane coupled microstrip antennas.

The elimination of offsets such as those induced by load disturbance is a principal requirement in the control of industrial processes. In this paper we propose a self-tuning minimum variance control in the two tuypes of k-incremental and integrating form. Since the objective of control design in this paper is a generalized minimum variance control, it can be applied to nonminimum phase system. And we compare the proposed algorithm wiht that of the positional self-tuning control and show that it can also be applied to nonminimum phase system by computer simulation.

A kinematic control for redundant manipulators is consisdered. An efficient computation method is proposed to determine the joint variable solutions for a given Cartesian path of the end effector. In the proposed method, the Jacobian matrix and its pseudoinverse matrix are calculated intermittently only when the errors exceed the prescribed tolerance. Thereby, the computational burdens are greatly reduced, and at the same time, the errors are maintained within a tolerable range. To show the effectiveness of the mehtod, the result of the simulation is provided in which the redundancy of the manipulator is resolved to avoid the singularity.

In this paper, we suggest a modified Gradient method for the identification of plant parameter. And also, through this new identification method, a direct adaptive control theory is proposed for a single-input single-output discrete system. Direct adaptive control theory proposed in this papar ensures global stability and the results of compute simulation show that the proposed algorithm can be applied to both stable and unstable plant.

The MgGa2Se4 single crystal for study of optical properties is for the first time grown by Bridgmna method. The crystal structure of grown MgGa2Se4 single crystal has the Rhomobohedral structure (R3m) and its lattice constant are a=3.950\ulcorner c=38.893\ulcornerin Hexagonal structure. The energy band structure of grown MgGa2Se4 single crystal structure has direct band gap and the optical energy gap measured from optical absorption in this crystal is 2.20eV at 290K. The temperature dependence of energy gap was given Eg(T)=Eg(O)-aT\ulcorner)B+T), from varshni equation, where Eg(O)=2.34eV, a=8.79x10**-4eV/and b=250K.

Thick film city gas sensors were fabricated using \ulcornerFe2O3 and \ulcorner-Fe2O3 as raw materials. Their electrical properties and sensitivity characteristics were investigated and the surface conditions for various firing temperatures were analyzed. The fabricated devices exhibited high sensitivity to butane gas(75~80% n 1, 000ppm butane ambient). Also they showed good selectivity and long-term stability. A city gas alarm system using fabricated sensors was made for the practical application.

In order to analyze the blooming suppression mechanism of a MOS image sensor, test photodiodes have been fabricated and characterized by attaching a source follower circuit. The blooming suppression ability of npn structure compared to that of np structure is quantitatively analyzed and measured by experiment. The dependency of the blooming current on the substrate voltage, the vertical MOS gate voltage and the video voltage is measured and the optimum condition for blooming suppression is presented.

The photoconductive multilayer of Se-As(hole blocking layer)/Se-As-Te (photoconductive layer) /Se-As (layer for supporiting hole transport)/Se-As(layer or controlling total capacitance)/Sb2S3(electron blocking layer) was fabricated and its electrical and optical properties were investigated. The photoconductive multilayer is made of evaporated a-Se as the base material, doped with As and Te to prevent the crystallization of a-Se and to enhance red sensitivity, respectively. The multilayer with good image reproducibility has the following deposition condition. The first layer has the thickness of 250\ulcornerat the deposition rate of 250\ulcornersec. The second layer has the thickness of 800\ulcornerat the deposition rate of 250\ulcornersec. The third layer has the thickness of 125\ulcornerat the deposition rate of 250\ulcornersec. The fourth layer has the thickness of 1700\ulcornerunder the Ar gas ambient of 50x10**-3torr. The image pick-up tube, employing this multilayer demonstrates the following characteristics. The photosensitivity is 0.8, the resolution limit is above 300TV line, and the decay lag is about 7%. And spectral response convers the whole visible range. Therfore the application to color TV camera is expected.

LSF(Line Spectral Frequency) derived from LPC has known as a very useful transmission parameter of speech signals, for it has a good linear interpolation characteristics and a low spectrum distortion at low bit rates coding. This paper presents that it is possible to extract directly the formant frequencies of speech signals from LSF parameter without application of FFT algorithm by comparing the distribution of LSF parameter with the frequency distribution of analysis filter. This paper suggests the advanced algorithm that results in improving the speed of convergence at analytic solution method. Also, for the flexibility of parameters, the process that transforms from LSF to LPC is presented.

This paper proposes a hybrid image coding in order to improve the coding performance by combining the BTC with the DPCM. And utilizing the human perceptual characteristics, a new objective image quality evaluation method has been proposed to obtain an excellent result in good agreement with the subjective quality evaluation. A hyb-1 method consisting of the DPCM and the AMBTC has retained a good picture quality at the bit rate of 1.5 bits/pel. A hyb-3 method combining the EBTC-3 with the DPCM has scarcely degraded the picture quality compared with the original image at the bit rate of 2.1 bits/pel. A newly proposed mehtod of picture quality evaluation accumulating a blocky noise at the edge block and an impulsive noise at the flat block selectively has been coincident with the subjective evaluation of quality.

A new interpolation function, named modified raised-cosine interpolation, is proposed. This function is derived from the linear combination of weighted triangular and raised-cosine functions to reduce the effect of side lobes which incur the interpolation error. Interpolation error reduces significantly for higher-order convolutional interpolation functions of linear operators, but at the expense of resolution error due to the attenuation of main lobe. However, the proposed interpolation function enables us to reduce the side lobes as well as to preserve the main lobe. To prove practicality, this function is applied in image reconstruction and enlargement.

In this paper, the theory and experiments on the one-way optical image transmission through optical fiber by using degenerate four wave mixing in BSO single crystal are demonstrated. From the theoretical analysis, the diffraction efficiency of phase conjugate wave in BSO single crystal is greatly dependent on applied electric field intensity, diffraction grating period formed in the crystal and incident beam ratio, those are also in good agreement with the experimental results. Based on the experimental results, we have arranged the typical degenerate four wave mixing system in the optimal conditions (applied electric field, E. = 5kV/cm` diffraction grating period, 3\ulcorner` beam ratio of backward pump wave versus signal wave, 2.7) and realized one-way optical image transmission system through optical fiber using BSO single crystal.