3D printer is the equipment of the system for sequentially layer laminated in the materials. Now 3D printer used in various fields such as, semiconductor, electricity automobile, medical and various types of output method and material. In this paper, we studied about the improvement on warpage due to shrinkage of product from 3D printer of FDM(Fused Deposition Modeling) type, we proposed measures systematically to solve warpage problem using of 6SC(6 Step Creativity) method of practical TRIZ. After experimented with product prototypes experiment, we verified effect about solution.

In RF plasma processing, when the plasma is generated, there is the difference of impedance between RF generator and plasma source. Its difference is normally reduced by using the matcher and the RF power is transferred efficiently from the power generator to the plasma source. The generated plasma has source impedance that it can be changed during processing by pressure, frequency, density and so on. If the range of source impedance excesses the matching range of the matcher, it cannot match all value of the impedance. In this research, we studied the elevation mechanism of the RF power delivery efficiency between RF generator to the plasma source by using the transmission line and impedance tuning of the plasma source. We focus on two plasma sources (capacitive coupled plasma (CCP), inductive coupled plasma (ICP)) which is most widely used in industry recently.

This paper, Ga-doped ZnO (GZO) thin films which were deposited on Corning glass substrate using an magnetron sputtering deposition technology and then the post deposition annealing process was conducted for 30 minutes at different temperature of 100, 200, 300, and $400^{\circ}C$, respectively. So as to investigate the properties for the relevant the Concentration and Oxygen Vacancy with Annealing temperature of Ga-doped ZnO thin films by RF Sputtering method. The Carrier concentration is enhanced as annealing temperature decreases, and also the oxygen vacancy concentration is enhanced as annealing temperature decreased. Oxygen vacancy will decrease along with Carrier concentration. This change in Carrier concentration is related to changes in oxygen vacancy concentration. The figure of merit obtained in this study means that Ga-doped ZnO films which annealed at $400^{\circ}C$ have the lowest Carrier concentration and Oxygen vacancy, which have the highest optoelectrical performance that it could be used as a transparent electrode.

More efficient use of the battery pack is dependent upon how to measure the remaining capacity of the battery accurately. Among various measurement methods, the basic correction measurement method has still been a hot research topic area to reduce the errors. In this paper, the problems of the existing methods have been investigated and the research direction for measuring more accurate remaining capacity has been suggested by applying the numerical simulations in the future.

The parallel computer cluster system has been known as the powerful tool to solve a complex physical phenomenon numerically. The numerical analysis of large size of Li-ion battery pack, which has a complex physical phenomenon, requires a large amount of computing time. In this study, the numerical analyses were conducted for comparing the computing efficiency between the single workstation and the parallel cluster system both with multicore CPUs'. The result shows that the parallel cluster system took the time 80 times faster than the single work station for the same battery pack model. The performance of cluster system was increased linearly with more CPU cores being increased.

The Townsend to glow discharge mode transition was investigated in the dielectric barrier discharge (DBD) helium plasma source which was powered by 20 kHz / $4.5 kV_{rms}$ high voltage at atmospheric pressure. The spatial profile of the electric field strength at each modes was measured by using the intensity ratio method of two helium emission lines (667.8 nm ($3^1D{\rightarrow}2^1P$) and 728.1 nm ($3^1S{\rightarrow}2^1P$)) and the Stark effect. ICCD images were analyzed with consideration for the electric field property. The Townsend discharge (TD) mode at the initial stage of breakdown has the light emission region located in the vicinity of the anode. The electric field of the light emitting region is close to the applied field in the system. Immediately, the light emitting region moves to the cathode and the discharge transits to the glow discharge (GD) mode. This mode transition can be understood with the ionization wave propagation. The electric field of the emitting region of GD near cathode is higher than that of TD near anode because of the cathode fall formation. This observation may apply to designing a DBD process system and to analysis of the process treatment results.

Sidewall angle (SWA) of an absorber stack in extreme ultraviolet lithography mask is considered to be $90^{\circ}$ ideally, however, it is difficult to obtain $90^{\circ}$ SWA because absorber profile is changed by complicated etching process. As the imaging performance of the mask can be varied with this SWA of the absorber stack, more complicated optical proximity correction is required to compensate for the variation of imaging performance. In this study, phase shift mask (PSM) is suggested to reduce the variation of imaging performance due to SWA change by modifying mask material and structure. Variations of imaging performance and lithography process margin depending on SWA were evaluated through aerial image and developed resist simulations to confirm the advantages of PSM over the binary intensity mask (BIM). The results show that the variations of normalized image log slope and critical dimension bias depending on SWA are reduced with PSM compared to BIM. Process margin for exposure dose and focus was also improved with PSM.

We investigate the solution coating process of organic small molecules that are easily recrystallized in a solvent. The spin-coated films of small molecule N,N'-diphenly-N,N'-bis(1,1'-biphenyl)-4,4'-diamine (NPB) exhibit many aggregations on the surface and thus poor surface morphology. To tackle it, we have added a chain-entangled polymer poly(N-vinylcarbazole) (PVK) into the NPB solution. It is found that a small amount of PVK indeed prohibits the recrystallization of NPB in a solvent. By the addition of PVK (30 wt%), the peak-to-peak roughness of the films is reduced from 262 nm down to 2.7 nm, which is even lower than that (~5.1 nm) of the polymer film. It is also demonstrated that OLED with the PVK-mixed NPB film shows higher current and power efficiencies, compared to OLED with the NPB or PVK film. It is attributed that the addition of PVK into NPB suppresses the occurrence of leaky channels induced by the recrystallization phenomenon.

In this paper, we propose a traffic light detection and recognition (TLDR) algorithm in the daytime. The proposed algorithm utilizes the color and shape information for the TLDR. At first, a traffic light is detected and recognized based on its shape information. Then, the color range of the detected traffic light is investigated in HSV color space. The input data of the proposed TLDR algorithm is the color image captured using the black box camera during driving. Our simulations demonstrate that the proposed algorithm can achieve a high detection and recognition performance for the images including traffic lights.

$SrAl_{12}O_{19}:Ce_x{^{3+}}$,$Eu_{0.01}{^{2+}}$ phosphors were synthesized through a combustion process and their optical properties were investigated using time-resolved photoluminescence. A PL spectrum showed two dominant peaks which appeared at 300 and 410 nm. It is seen that, as the $Ce^{3+}$ concentration increases, the intensity of 300 nm decreases and the intensity of 410 nm increases. This behavior has been explained by two independent energy transfer mechanism. The first energy transfer occurs from $Ce^{3+}$ ion to $Eu^{3+}$ ion. The second energy transfer takes place from $Ce^{3+}$ ion to $Ce^{3+}-O_{ME}$ complex created in the magnetoplumbite structural host materials. The blue emitting 410 nm peak has been explained by both energy transfer mechanisms.

This study was developed through the secondary battery module charging/discharger possible utilization in the production process equipment circuit. The developed module is ensuring construction of efficient and productive charging and discharger through this research a limit on the yield and the price of existing single -channel charge and discharger circuit as a 5V 70A grade secondary battery Formation charge and discharger for up to 1 board 4 channels. In order to improve the sensing accuracy, through a robust differential amplifier circuit described using 16bit Analog-Digital Converter and noise was secured 16bit resolution sensing. The configuration also made demands for property Rise / Fall Time. Data Acquisition, discharge efficiency and also to fit the sink circuit temperature level for mass production.

Facial feature detection is a fundamental function in the field of computer vision such as security, bio-metrics, 3D modeling, and face recognition. There are many algorithms for the function, active shape model is one of the most popular local texture models. This paper addresses issues related to face detection, and implements an efficient extraction algorithm for extracting the facial feature points to use on iOS platform. In this paper, we extend the original ASM algorithm to improve its performance by four modifications. First, to detect a face and to initialize the shape model, we apply a face detection API provided from iOS CoreImage framework. Second, we construct a weighted local structure model for landmarks to utilize the edge points of the face contour. Third, we build a modified model definition and fitting more landmarks than the classical ASM. And last, we extend and build two-dimensional profile model for detecting faces within input images. The proposed algorithm is evaluated on experimental test set containing over 500 face images, and found to successfully extract facial feature points, clearly outperforming the original ASM.

Recently, augmented reality and virtual reality in the ICT sector have been highlighted. So also interested in related HMD areas to facilitate contact with the VR content is being attend. This paper proposes a method for implementing to the virtual reality through the mobile HMD device with the real time 360 image. This system is required the real time 360 image streaming server configuration and image processing for augmented reality and virtual reality. The configuration of the streaming server is configured the DB server to store images and the relay server that can relay images to other devices. Augmented image processing module is composed based on markerless tracking, and there are four modules that are recognition, tracking, detecting and learning module. Also, the purpose of this paper is shown the augmented 360 image processing through the Mobile HMD.

Previously proposed contamination detecting sensor was revisited for the investigation of the liquid tendency. Experiments revealed different output voltages for several kinds of liquid input, but showed same values for various flow rates of each liquid. The transmittance of the liquid was measured, and it is well correlated with the voltages. Linearity in values and the compensation of the sensor to sensor deviation were tried to obtain. And, long term test was performed as attached at the manufacturing equipment in the field.

This study presents a thermal device specially designed for thermal nanoimprint lithography equipments, which requires the capability of rapid heating and cooling, high temperature uniformity and the material strength to endure high stamping pressure. The proposal to meet these requirements is a planar-type hot plate extensible to a large area, in which long circular cartridge heaters and heat pipes are installed inside in parallel. The heat pipes are connected to the outside water cooling chamber. A hot plate made of stainless steel is fabricated with a dimension $240mm{\times}240mm{\times}20mm$. Laboratory experiments are conducted to examine the thermal performance of the hot plate. The results illustrate that the employment of heat pipes leads to a notable enhancement of temperature uniformity in the device and provides an efficient heat delivery from the hot plate to outside. It is verified that the suggested hot plate could be a feasible thermal tool for thermal nanoimprint lithography, satisfying the major design requirements.

Moisture vapor transmission rate (MVTR) is an important item for many applications of polymer breathable thin film. To determine the optimum values of the process parameters, it is essential to find their influence on The significance of six important process parameters namely, extruder cylinder temperature, extruder speed, extruder dies temperature, cooling roll temperature, stretching ratio, stretching roll temperature on breathable film strength of polymer extrusion was determined. Moreover, this paper presents the application of Taguchi method and analysis of variance (ANOVA) for maximization of the breathable film MVTR influenced by extrusion parameters. The optimum parameter combination of extrusion process was obtained by using the analysis of signal-to-noise ratio. The conclusion revealed that extruder speed and stretching ratio were the most influential factor on the film strength, respectively. The best results of film MVTR were obtained at higher extruder speed and stretching ratio.