• Transactions on Electrical and Electronic Materials
• /
• v.14 no.6
• /
• pp.291-294
• /
• 2013

When subjected to a change in dimensions, the device performance decreases. Multi-gate SOI devices, viz. the Double Gate MOSFET (DG-MOSFET), are expected to make inroads into integrated circuit applications previously dominated exclusively by planar MOSFETs. The primary focus of attention is how channel engineering (i.e. Graded Channel (GC)) and gate engineering (i.e. Dual Insulator (DI)) as gate oxide) creates an effect on the device performance, specifically, leakage current ($I_{off}$), on current ($I_{on}$), and DIBL. This study examines the performance of the devices, by virtue of a simulation analysis, in conjunction with N-channel DG-MOSFETs. The important parameters for improvement in circuit speed and power consumption are discussed. From the analysis, DG-DI MOSFET is the most suitable candidate for high speed switching application, simultaneously providing better performance as an amplifier.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.7 no.2
• /
• pp.76-81
• /
• 2007

Threshold voltage ($V_{th}$) modeling of doublegate (DG) MOSFETs was performed, for the first time, by considering barrier lowering in the short channel devices. As the gate length of DG MOSFETs scales down, the overlapped charge-sharing length ($x_h$) in the channel which is related to the barrier lowering becomes very important. A fitting parameter ${\delta}_w$ was introduced semi-empirically with the fin body width and body doping concentration for higher accuracy. The $V_{th}$ model predicted well the $V_{th}$ behavior with fin body thickness, body doping concentration, and gate length. Our compact model makes an accurate $V_{th}$ prediction of DG devices with the gate length up to 20-nm.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.13 no.5
• /
• pp.511-515
• /
• 2013

A Monte Carlo (MC) simulation study has been done in order to investigate the effects of line-edge-roughness (LER) induced by either 1P1E (single-patterning and single-etching) or 2P2E (double-patterning and double-etching) on fully-depleted silicon-on-insulator (FDSOI) tri-gate metal-oxide-semiconductor field-effect transistors (MOSFETs). Three parameters for characterizing the LER profile [i.e., root-mean square deviation (${\sigma}$), correlation length (${\zeta}$), and fractal dimension (D)] are extracted from the image-processed scanning electron microscopy (SEM) image for each photolithography method. It is experimentally verified that two parameters (i.e., ${\sigma}$ and D) are almost the same in each case, but the correlation length in the 2P2E case is longer than that in the 1P1E case. The 2P2E-LER-induced $V_TH$ variation in FDSOI tri-gate MOSFETs is smaller than the 1P1E-LER-induced $V_TH$ variation. The total random variation in $V_TH$, however, is very dependent on the other major random variation sources, such as random dopant fluctuation (RDF) and work-function variation (WFV).

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.47 no.8
• /
• pp.13-22
• /
• 2010

Independent-Gate-Mode Double-Gate(IGM-DG) MOSFET overcomes the limitation of bulk-MOSFET's channel controllability and enables to control the front and back-gate voltages independently. Therefore, circuit designs utilizing the IGM-DG MOSFETs provide the advantage of setting 4-terminal freely, hence achieving not only the performance improvement but also the larger scale integration. This paper presents a 15Gb/s optical receiver with a 1.0V power supply voltage, which consists of a transimpedance amplifier (TIA), a feedforward limiting amplifier (LA), and an output buffer. HSPICE simulations were conducted to confirm the circuit performance, and also to verify the circuit stability issues which may occur from the variations of process and supply voltage.

• Journal of information and communication convergence engineering
• /
• v.9 no.5
• /
• pp.583-586
• /
• 2011

In this paper, subthreshold swing characteristics have been presented for double-gate MOSFETs, using the analytical model based on series form of potential distribution. Subthreshold swing is very important factor for digital devices because of determination of ON and OFF. In general, subthreshold swings have to be under 100mV/dec. The channel length $L_g$ is varied from 30nm to 100nm, and channel thickness $t_{si}$ from 15 to 20nm according to channel length, and oxide thickness 5nm to investigate subthreshold swing. The doping of channel is fixed with $10^{16}cm^{-3}$ p-type. The results show good agreement with numerical simulations, confirming this model.

• Journal of IKEEE
• /
• v.19 no.4
• /
• pp.514-519
• /
• 2015

We propose the multiple gate structure of double gate junctionless metal oxide silicon field oxide transistor (JL MOSFET) for device optimization. Since different workfunction within multiple metal gates, electric potential nearby source and drain region is modulated in accordance with metal gate length. On current, off current and threshold voltage are influenced with gate structure and make possible to meet some device specification. Through the device simulation work, performance optimization of double gate JL MOSFETs are introduced and investigated.

• Proceedings of the IEEK Conference
• /
• 2005.11a
• /
• pp.897-900
• /
• 2005

RF linearity of double-gate MOSFETs is investigated using accurate two-dimensional simulations. The linearity has been analyzed using the Talyor series. Transconductance is dominant nonlinear source of CMOS. It is shown that DGMOSFET linearity can be improved by a careful optimization of channel thickness, gate oxide thickness, gate length, overlap length and channel doping concentration. The minimum $P_{IP3}$ data are compared in each case. It is shown that DG-MOSFET linearity can be improved by a careful optimization of channel thickness, gate oxide thickness, gate length, overlap length and channel doping concentration..

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.31 no.3
• /
• pp.146-151
• /
• 2018

In this study, we compared the threshold-voltage extraction methods of accumulation-type JLDG (junctionless double-gate) MOSFETs (metal-oxide semiconductor field-effect transistors). Threshold voltage is the most basic element of transistor design; therefore, accurate threshold-voltage extraction is the most important factor in integrated-circuit design. For this purpose, analytical potential distributions were obtained and diffusion-drift current equations for these potential distributions were used. There are the ${\phi}_{min}$ method, based on the physical concept; the linear extrapolation method; and the second and third derivative method from the $I_d-V_g$ relation. We observed that the threshold-voltages extracted using the maximum value of TD (third derivatives) and the ${\phi}_{min}$ method were the most reasonable in JLDG MOSFETs. In the case of 20 nm channel length or more, similar results were obtained for other methods, except for the linear extrapolation method. However, when the channel length is below 20 nm, only the ${\phi}_{min}$ method and the TD method reflected the short-channel effect.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.10 no.2
• /
• pp.130-133
• /
• 2010

This paper presents a study of the influence of variation of counter doping thickness on short channel effect in symmetric double-gate (DG) nano MOSFETs. Short channel effects are estimated from the computed values of current-voltage (I-V) characteristics. Two dimensional Quantum transport equations and Poisson equations are used to compute DG MOSFET characteristics. We found that the transconductance ($g_m$) and the drain conductance ($g_d$) increase with an increase in p-type counter-doping thickness ($T_c$). Very high value of transconductance ($g_m=38\;mS/{\mu}m$) is observed at 2.2 nm channel thickness. We have established that the threshold voltage of DG MOSFETs can be tuned by selecting the thickness of counter-doping in such device.

• Proceeding of EDISON Challenge
• /
• 2014.03a
• /
• pp.457-458
• /
• 2014

In this paper, quantum mechanical simulations of the double-gate ultra-thin body (DG-UTB) MOSFETs are performed according to the International Technology Roadmap of Semiconductors (ITRS) specifications planned for 2020, to devise the way for on-current ($I_{on}$) improvement. We have employed non-equilibrium Green's function (NEGF) approach and solved the self-consistent equations based on the parabolic effective mass theory [1]. Our study shows that the [100]/<001> Ge and GaSb channel devices have higher $I_{on}$ than Si channel devices under the body thickness ($T_{bd}$) <5nm condition.