• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2008년도 International Meeting on Information Display
• /
• pp.674-676
• /
• 2008

An electrostatic discharge (ESD) or a noise supplied from the outside has an effect on communication between the timing controller (TCON) and the memory element (EEPROM) through the interface between the timing controller and the memory element in liquid crystal displays (LCD). Therefore, we must apply ESD protection methods to LCD operating circuits for a normal operation. Our ESD protection circuit is to prevent from bi-directional communication errors between TCON and EEPROM due to an electrostatic discharge (ESD).

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제16권5호
• /
• pp.650-656
• /
• 2016

Voltage controlled oscillator (VCO) is widely used circuit component in high-performance microprocessors and modern communication systems as a frequency source. In present work, VCO designs using the different combination of NAND gates with three transistors and CMOS inverter are reported. Three, five and seven stages ring VCO circuits are designed. Coarse and fine tuning have been done using two different supply sources. The frequency with coarse tuning varies from 3.31 GHz to 5.60 GHz in three stages, 1.77 GHz to 3.26 GHz in five stages and 1.27 GHz to 2.32 GHz in seven stages VCO respectively. Moreover, for fine tuning frequency varies from 3.70 GHz to 3.94 GHz in three stages, 2.04 GHz to 2.18 GHz in five stages and 1.43 GHz to 1.58 GHz in seven stages VCO respectively. Results of power consumption and phase noise for the VCO circuits are also been reported. Results of proposed VCO circuits have been compared with previously reported circuits and present circuit approach show significant improvement.

• ETRI Journal
• /
• 제31권2호
• /
• pp.209-214
• /
• 2009

In this paper, we propose a novel test methodology for the detection of catastrophic and parametric faults present in analog very large scale integration circuits. An automatic test pattern generation algorithm is proposed to generate piece-wise linear (PWL) stimulus using wavelets and a genetic algorithm. The PWL stimulus generated by the test algorithm is used as a test stimulus to the circuit under test. Faults are injected to the circuit under test and the wavelet coefficients obtained from the output response of the circuit. These coefficients are used to train the neural network for fault detection. The proposed method is validated with two IEEE benchmark circuits, namely, an operational amplifier and a state variable filter. This method gives 100% fault coverage for both catastrophic and parametric faults in these circuits.

• 전기전자학회논문지
• /
• 제14권4호
• /
• pp.283-290
• /
• 2010

본 연구는 광통신을 위한 10Gbps CMOS 수신기 회로 설계에 관한 것이다. 수신기는 포토다이오드, 트랜스임피던스 증폭기, 리미팅 증폭기, 등화기, 클락 및 데이터 복원 회로, 디멀티플렉서, 기타 입출력 회로 등으로 구성돼있다. 여러 광대역 혹은 고속 회로 기법을 써서 SONET OC-192 표준용 광통신에 적합한, 효과적이고 신뢰성 있는 수신기를 구현하고자 하였다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1997년도 전력전자학술대회 논문집
• /
• pp.211-215
• /
• 1997

Localized communication networks for office automation, security monitoring, environmental management of buildings, computer communications, and other applications enjoy every increasing demand. This paper proposes a direct sequence spread spectrum communication system for use in power line data transmission. Advantages of power distribution circuits include reasonably universal coverage and easy access vis a standard wall plug. Disadvantages include limited communication bandwidth, relatively high noise levels, and varying levels of impedance, noise, and attenuation. Spread spectrum signalling provides immunity to narrow-band signal impairments and multiplexing capability. Our prototype power line communication module supports completely physical and data link layers based on the international standard ISO 10368 for reliable high-speed power line communication system. Moreover it provides useful functions to compose a plant monitoring and control system. All the circuits of the communication module are included in one compact circuit. Thus a functional communication system for the power line plant monitoring and control is implemented.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1996년도 추계학술대회 논문집
• /
• pp.353-356
• /
• 1996

Ultra-high-speed analog and digital ICs (integrated circuits) fur 10Gbit/sec optical communication systems have been designed, fabricated and analyzed in this research. These circuits, which are laser diode (LD) driver, pre-amplifier, automatic gain controlled (AGC) amplifier, limiting amplifier and decision circuit, have been implemented with AIGaAs/GaAs heterojunction bipolar transistors (HBTs). The optimized AIGaAs/GaAs HBTs for the 10Gbps circuits in this work showed the cutoff and maximum oscillation frequencies of 65㎓ and 53㎓, respectively. It is demonstrated in this paper that the 10Gbps optical communication system can be realized with the ICs designed and fabricated using AlGaAs/GaAs HBTs.

• Journal of information and communication convergence engineering
• /
• 제11권1호
• /
• pp.56-61
• /
• 2013

Modern integrated circuits (ICs) are becoming an integrated parts of analog, digital, and radio frequency (RF) circuits. Testing these RF circuits on a chip is an important task, not only for fabrication quality control but also for tuning RF circuit elements to fit multi-standard wireless systems. In this paper, RF test circuits suitable for embedded testing are introduced: RF power detectors, power control circuits, directional couplers, and six-port reflectometers. Various types of embedded RF power detectors are reviewed. The conventional approach and our approach for the RF power control circuits are compared. Also, embedded tunable active directional couplers are presented. Then, six-port reflectometers for embedded RF testing are introduced including a 77-GHz six-port reflectometer circuit in a 130 nm process. This circuit demonstrates successful calibrated reflection coefficient simulation results for 37 well distributed samples in a Smith chart. The details including the theory, calibration, circuit design techniques, and simulations of the 77-GHz six-port reflectometer are presented in this paper.

• 한국전자통신학회논문지
• /
• 제5권4호
• /
• pp.443-449
• /
• 2010

전류 테스팅은 기존의 전압 테스트 방식에 비해서 높은 고장 검출과 진단 능력을 가진 효과적인 테스트 방식이다. 그러나 상대적으로 느린 전류 테스팅을 위해서 항상 같은 값을 가지는 노드를 찾아내어 제거하는 효율적인 검출 기법이 필요하다. 본 논문에서는 전류 테스팅을 위한 다양한 고장모델에 적용 가능한 객체기반의 고장 검출 기법을 제안한다. ISCAS 벤치마크 회로의 실험결과을 통해서 제안된 방식이 고려되는 고장의 수를 효과적으로 감소시킬 수 있고 다양한 전류 테스팅 고장모델에 적용 가능함을 확인하였다.

• ETRI Journal
• /
• 제44권5호
• /
• pp.837-848
• /
• 2022

Analog circuit design is comparatively more complex than its digital counterpart due to its nonlinearity and low level of abstraction. This study proposes a novel low-level hybrid of the sine-cosine algorithm (SCA) and modified grey-wolf optimization (mGWO) algorithm for machine learning-based design automation of CMOS analog circuits using an all-CMOS voltage reference circuit in 40-nm standard process. The optimization algorithm's efficiency is further tested using classical functions, showing that it outperforms other competing algorithms. The objective of the optimization is to minimize the variation and power usage, while satisfying all the design limitations. Through the interchange of scripts for information exchange between two environments, the SCA-mGWO algorithm is implemented and simultaneously simulated. The results show the robustness of analog circuit design generated using the SCA-mGWO algorithm, over various corners, resulting in a percentage variation of 0.85%. Monte Carlo analysis is also performed on the presented analog circuit for output voltage and percentage variation resulting in significantly low mean and standard deviation.

• 한국정보통신학회논문지
• /
• 제3권4호
• /
• pp.805-817
• /
• 1999

In this paper, the needs for introduction and adoption of MㆍHF DSC/NBDP system and for developments of its circuits and call sequences for use in the maritime mobile services for small-ships, leisure-ships and fishing ships are analyzed, discussed. Also design and implement for MㆍHF(1.6-4MHz) DSC/NBDP system is discussed. Most of casualties have been arisen from small-ships and fishing ships during last 5 years. So, the SAR schematic plans should been prepared to prevent casualties and facilitate the activities of SAR for those ships. DSC/NBDP for MㆍHF system is able to fulfill the roles of efficient SAR communication functions, and to advance the SAR system to small ships and fishing ships. This study is focused on the techniques of processing the DSC call sequences and the ARQ sequences of NBDP system. Especially ARQ sequences are expanded into processing of Korean letters, designed the call sequences and code conversion algorithm for Korean-code. It will be evaluated the availability of Korean-NBDP system. In designing the Transmitting circuits and Receiving circuits, for the carrier generation, DDS(Direct Digital Synthesizer) is used in stead of the Phase Locked Loop and frequency conversion by the mixer, BPF. And PSK modulation signals are directly generated by the controls of DDS, which show the characteristics of Spurious Free Dynamic Range are below -62dBc. Also, the monolithic U subsystem IC which provides various functional components, AD608 is used for designing the receiving circuitsㆍAnd the algorithm of Phasing methode for FSK demodulation are devised to process IF frequency 455kHz in the IF circuits.