• Journal of the Korean Institute of Telematics and Electronics C
• /
• v.34C no.6
• /
• pp.37-43
• /
• 1997

In this paper, an analog-domain powr-reduction technique for a low-voltage CMOS operational amplifier and its application to clock-based VLSI systems are proposed. The proposed technique cuts off the bias current of the op amp during a half cycle of the clock in the sleeping mode and resumes the curent supply sequentially during the remaining cycle of the clock in the normal operating mode. The proposed sequential sbiasing technique reduces about 50% of the op amp power and improves the circuit performance through high phase margin and stable settling behavior of the output voltage. The power-reduction technique is applied to a sample-and-hold amplifier which is one of the critical circuit blocks used in the front-end stage of analog and/or digital integrated systems. The SHA was simulated and analyzed in a 0.8.mu.m n-well double-poly double-metal CMOS technology.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.45 no.2
• /
• pp.319-324
• /
• 1996

Using random pulse stream, a number can be transformed to the pulse stream with the probability value. So the digital value are computed by simple digital gates. Thus it will be possible to build a small and strong noise immunity processing element. We propose a faster convergence algorithm using a new methods for better performance of Random Number Generator(RNG) an the nonlinear transfer function(Sigmoid function)in this paper. And a feedback circuit were fitted for pulse stream in this paper. We proposed method is simulated with C program language and conformed by circuit implementation. Finally a system for hand written number recognition is constructed by FPGA and its performance verified.

• The Transactions of the Korea Information Processing Society
• /
• v.6 no.3
• /
• pp.766-772
• /
• 1999

With the increase of portable system and high-density IC, power consumption of VLSI circuits is very important factor in design process. Power estimation is required in order to estimate the power consumption. A simple and correct solution of power estimation is to use circuit simulation. But it is very time consuming and inefficient way. Probabilistic method has been proposed to overcome this problem. Transition density using probability was an efficient method to estimate power consumption using BDD and Boolean difference. But it is difficult to build the BDD and compute complex Boolean difference. In this paper, we proposed Propowest. Propowest is building a digraph of circuit, and easy and fast in computing transition density by using modified COP algorithm. Propowest provides an efficient way for power estimation.

• Journal of Sensor Science and Technology
• /
• v.28 no.1
• /
• pp.17-22
• /
• 2019

As CMOS technology scales down, reliability is becoming an important concern for VLSI designers. This paper analyzes gate-oxide breakdowns (i.e., the time-dependent dielectric-breakdown (TDDB) aging effect) as a reliability issue for combinational circuits with 45-nm technology. This paper shows simulation results for the noise margin, delay, and power using a single inverter-chain circuit, as well as the International Symposium on Circuits and Systems (ISCAS)'85 benchmark circuits. The delay and power variations in the presence of TDDB are also discussed in the paper. Finally, we propose a novel method to compensate for the logic failure due to dielectric breakdowns: We used a higher supply voltage and a negative ground voltage for the circuit. The proposed method was verified using the ISCAS'85 benchmark circuits.

• ETRI Journal
• /
• v.44 no.3
• /
• pp.491-503
• /
• 2022

Metal-oxide-semiconductor field-effect transistors (MOSFETs) are continuously scaling down in the nanoscale region to improve the functionality of integrated circuits. The scaling down of MOSFET devices causes short-channel effects in the nanoscale region. In nanoscale region, leakage current components are increasing, resulting in substantial power dissipation. Very large-scale integration designers are constantly exploring different effective methods of mitigating the power dissipation. In this study, a transistor-level input-controlled stacking (ICS) approach is proposed for minimizing significant power dissipation. A low-power ICS approach is extensively discussed to verify its importance in low-power applications. Circuit reliability is monitored for process and voltage and temperature variations. The ICS approach is designed and simulated using Cadence's tools and compared with existing low-power and high-speed techniques at a 22-nm technology node. The ICS approach decreases power dissipation by 84.95% at a cost of 5.89 times increase in propagation delay, and improves energy dissipation reliability by 82.54% compared with conventional circuit for a ring oscillator comprising 5-inverters.

• The Transactions of the Korea Information Processing Society
• /
• v.5 no.9
• /
• pp.2378-2387
• /
• 1998

This thesis proposes a design algorithm of an efficient space response compactor for Built-In Self-Testing of VLSI circuits. The proposed design algorithm of space compactors can be applied independently from the structure of Circuit Cnder Test. There are high hardware overhead cost in conventional space response compactors and the fault coverage is reduced by aliasing which maps faulty circuit's response to fault-free one. However, the proposed method designs space response compactors with reduced hardware overheads and does not reduce the fault coverage comparing to conventional method. Also, the proposed method can be extended to general N -input logic gate and design the most efficient space response L'Ompactors according to the characteristies of output sequence from CUT. The prolxlsed design algorithm is implemented by C language on a SUN SPARC Workstation, and some experiment results of the simulation applied to ISCAS'85 benchmark circuits with pseudo random patterns generated bv LFSR( Linear Feedback Shift Register) show the efficiency and validity of the proposed design algorithm.

• The KIPS Transactions:PartA
• /
• v.9A no.3
• /
• pp.271-280
• /
• 2002

In this paper, the input-output interconnection method of the multiple-valued signal processing circuit using Perfect Shuffle technique and Kronecker product is discussed. Using this method, the circuit design method of the multiple-valued Reed-Muller Expansions (MRME) which can process the multiple-valued signal easily on finite fields GF$(p^m)$ is presented. The proposed input-output interconnection methods show that the matrix transform is an efficient and the structures are modular. The circuits of multiple-valued signal processing of MRME on GF$(p^m)$ design the basic cells to implement the transform and inverse transform matrix of MRME by using two basic gates on GF(3) and interconnect these cells by the input-output interconnection technique of the multiple-valued signal processing circuits. The proposed multiple-valued signal processing circuits that are simple and regular for wire routing and possess the properties of concurrency and modularity are suitable for VLSI.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.3A
• /
• pp.331-336
• /
• 2004

This study focuses on the hardware implementation of fast and low-system-complexity multiplier over GF(2$^{m}$ ). From the properties of an irreducible AOP of degree m. the modular reduction in GF(2$^{m}$ ) multiplicative operation can be simplified using cyclic shift operation. And then, GF(2$^{m}$ ) multiplicative operation can be established using the away structure of AND and XOR gates. The proposed multiplier is composed of m(m+1) 2-input AND gates and (m+1)$^2$ 2-input XOR gates. And the minimum critical path delay is Τ$_{A+}$〔lo $g_2$$^{m}$ 〕Τ$_{x}$ proposed multiplier obtained have low circuit complexity and delay time, and the interconnections of the circuit are regular, well-suited for VLSI realization.n.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.4
• /
• pp.781-788
• /
• 2017

This paper proposes a new algorithm for comparing amplitude between multiple digital input signals and its digital logic architecture. After simultaneously comparing multiple inputs, the proposed algorithm can provide the information of the largest (or smallest) value among them by using a simple digital logic function. The drawback of the method is to increase hardware resource. To overcome this we propose a reuse method of the overlapped logic operation. The proposed method focuses on enhancing the operational clock frequency, in other words decreasing combinational delay time. After implementing the comparing method with HDL (hardware description language), we experiment on it with environment of Cyclone III EP3C40F324A7 FPGA of Altera Inc. In case of 4 input signals, it can increase the operational speed as mush as 1.66 times with 1.20 times the hardware resource. In case of 8, it can also have 2.29 times the clock frequency and 2.15 times the hardware resource.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.48 no.3
• /
• pp.25-33
• /
• 2011

As chip operating frequency increases, there is growing concern about on-chip interconnect inductance. This paper presents a two-step inductance screening tool to select interconnects with significant inductance effects in a VLSI design. Test chips designed in different CMOS technology nodes are examined. The inductance screening results show that 0.1% of the nets in a design have inductance problems with chips running at its operating frequency, supporting the necessity of a screening process instead of adding inductance model to all the nets in the design. The increase in resistance due to geometry scaling will strongly affect the significance of inductance on delay as technology and frequency scale. Since higher frequency worsens inductance problem and geometry scaling alleviates it, inductance screening tool can provide useful guidelines to circuit designers.