• JSTS:Journal of Semiconductor Technology and Science
• /
• v.17 no.1
• /
• pp.156-161
• /
• 2017

This work presents a novel structure for junction-less tunneling field effect transistor (JL-TFET) with a floating gate over the source region. Introduction of floating gate instead of fixed metal gate removes the limitation of fabrication process suitability. The proposed device is based on a heavily n-type-doped Si-channel junction-less field effect transistor (JLFET). A floating gate over source region and a control-gate with optimized metal work-function over channel region is used to make device work like a tunnel field effect transistor (TFET). The proposed device has exhibited excellent ID-VGS characteristics, ION/IOFF ratio, a point subthreshold slope (SS), and average SS for optimized device parameters. Electron charge stored in floating gate, isolation oxide layer and body doping concentration are optimized. The proposed JL-TFET can be a promising candidate for switching performances.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.11 no.4
• /
• pp.287-294
• /
• 2011

In this paper, two competing mechanisms determining drain current of tunneling field-effect transistors (TFETs) have been investigated such as band-to-band tunneling and drift. Based on the results, the characteristics of TFETs have been discussed in the tunneling-dominant and drift-dominant region.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.10a
• /
• pp.611-613
• /
• 2016

The characteristics of tunnel field-effect transistor(TFET) structure with source-overlapped gate was investigated using a TCAD simulations. Tunneling is mostly divided into line-tunneling and point-tunneling, and line-tunneling is higher performance than point-tunneling in terms of subthreshold swing(SS) and on-current. In this paper, from the simulation results of source-overlapped gate length effects at silicon(Si), germanium(Ge), Si-Ge hetero TFET structure, the guideline of optimal structure with highest performance are proposed.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2019.05a
• /
• pp.475-476
• /
• 2019

L-shaped tunneling field-effect-transistor (LTFET) is considered a superior device over conventional TFETs. However, experimentally demonstrated LTFET demonstrated poor subthreshold characteristics which was attributed to trap-assisted-tunneling (TAT) caused by presence of trap states. In this paper, TAT mechanism in the experimentally demonstrated LTFET is investigated with the help of band diagram and TAT recombination rate (GTAT).

• Journal of Electrical Engineering and Technology
• /
• v.8 no.6
• /
• pp.1481-1486
• /
• 2013

In this paper, a new two dimensional (2D) analytical model of a Dual Material Gate tunnel field effect transistor (DMG TFET) is presented. The parabolic approximation technique is used to solve the 2-D Poisson equation with suitable boundary conditions. The simple and accurate analytical expressions for surface potential and electric field are derived. The electric field distribution can be used to calculate the tunneling generation rate and numerically extract tunneling current. The results show a significant improvement of on-current and reduction in short channel effects. Effectiveness of the proposed method has been confirmed by comparing the analytical results with the TCAD simulation results.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.11 no.3
• /
• pp.182-189
• /
• 2011

In this work, a tunneling field-effect transistor (TFET) based on heterojunctions of compound and Group IV semiconductors is introduced and simulated. TFETs based on either silicon or compound semiconductors have been intensively researched due to their merits of robustness against short channel effects (SCEs) and excellent subthreshold swing (SS) characteristics. However, silicon TFETs have the drawback of low on-current and compound ones are difficult to integrate with silicon CMOS circuits. In order to combine the high tunneling efficiency of narrow bandgap material TFETs and the high mobility of III-V TFETs, a Type-I heterojunction tunneling field-effect transistor (I-HTFET) adopting $Ge-Al_xGa_{1-x}As-Ge$ system has been optimized by simulation in terms of aluminum (Al) composition. To maximize device performance, we considered a nanowire structure, and it was shown that high performance (HP) logic technology can be achieved by the proposed device. The optimum Al composition turned out to be around 20% (x=0.2).

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.11 no.4
• /
• pp.272-277
• /
• 2011

The ambipolar behavior of tunneling field-effect transistors (TFETs) has been investigated quantitatively by introducing a novel parameter: ambipolarity factor (${\nu}$). It has been found that the malfunction of TFET can result from the ambipolar state which is not on- or off- state. Therefore, the effect of ambipolar behavior on the device performance should be parameterized quantitatively, and this has been successfully evaluated as a function of device structure, gate oxide thickness, supply voltage, drain doping concentration and body doping concentration by using ${\nu}$.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.16 no.2
• /
• pp.172-178
• /
• 2016

In this paper, we propose a sub-10 nm Ge/GaAs heterojunction-based tunneling field-effect transistor (TFET) with vertical band-to-band tunneling (BBT) operation for ultra-low-power (LP) applications. We design a stack structure that is based on the Ge/GaAs heterojunction to realize the vertical BBT operation. The use of vertical BBT operations in devices results in excellent subthreshold characteristics with a reduction in the drain-induced barrier thinning (DIBT) phenomenon. The proposed device with a channel length ($L_{ch}$) of 5 nm exhibits outstanding LP performance with a subthreshold swing (S) of 29.1 mV/dec and an off-state current ($I_{off}$) of $1.12{\times}10^{-11}A/{\mu}m$. In addition, the use of the highk spacer dielectric $HfO_2$ improves the on-state current ($I_{on}$) with an intrinsic delay time (${\tau}$) because of a higher fringing field. We demonstrate a sub-10 nm LP switching device that realizes a good S and lower $I_{off}$ at a lower supply voltage ($V_{DD}$) of 0.2 V.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.10a
• /
• pp.170-171
• /
• 2016

A surface potential model is introduced for L-shaped tunnel field-effect-transistor(L-TFET). Excellent agreement is obtained when model results are compared with TCAD data.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.05a
• /
• pp.445-447
• /
• 2016

Performance comparison between Tunneling Field-Effect Transistors (TFETs) was examined when three types of device parameter of double-gate TFET (DG-TFET) and single-gate TFET (SG-TFET) are varied. When the channel length is over 30 nm, silicon thickness is below 20 nm, and a gate insulator thickness decreases, the performance of $I_{on}$ and SS in SG-TFETs and DG-TFETs enhances. It shows that the performance of the DG-TFETs is improved than that of SG-TFETs at three types of device parameter.