• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• autumn
• /
• pp.19-26
• /
• 2003

In the face of the deterioration of tobacco manufacturing plant, we've got the plan for now manufacturing factory for the competitiveness, modernization, rationalization and environment. To achieve the goals, it was necessary to plan and investigate in the early stage of project. Consequently. We determined to introduce the CM in the early stage. We Performed the whole phase of CM services front the pre design phase services like feasibility analysis of site and building, plant master plan, selection of manufacturing facilities and drawing up the RFP, to maintenance management phase after the completion of a construction work. Contrary to the another CM projects, YongJu New Tobacco Manufacturing Plant CM organized the CM team with expert in field before the design development. This study analyze and evaluate the CM services of YongJu project which performed on the pre design phase. The purpose of this study is to emphasize the importance of pre design phase CM and support that CM services will start from the pre design phase.

• Journal of Applied Reliability
• /
• v.12 no.3
• /
• pp.131-138
• /
• 2012

A design of reliability qualification test based on performance distribution is developed. In general, the performance of an item degrades as the time goes by and the failure of an item occurs when the performance degradation reaches the pre-determined critical level. This article considers the reliability qualification test based on a more tightened critical value at the earlier stage to reduce the evaluation testing time and cost. A numerical example is provided to illustrate how to use the developed reliability qualification test.

• Proceedings of the KIPE Conference
• /
• 2009.11a
• /
• pp.206-208
• /
• 2009

In this paper, a systematical controller design method for a twostage grid-connected photovoltaic power conditioning system is proposed. For a pre-stage boost converter to achieve the stable operation in the entire region of solar array, the digital resistive current mode controller is used. This algorithm is very simple to implement with a digital controller and there is no power stage parameter dependency in the controller design. For a post-stage single-phase full-bridge inverter, a PI controller with a feedforward compensation for the inner current control is employed. Furthermore, in case that the operating point of the solar array under varying environmental conditions is higher than the required voltage for the inverter current control, the bypass mode for the boost converter is possible for the more efficient operation. The proposed control scheme is validated through the experiment of the prototype two-stage power conditioning system hardware with a 200W solar array.

• Plant Journal
• /
• v.13 no.3
• /
• pp.30-35
• /
• 2017

Module can be categorized as PAS(Pre-Assembled Steel structure), PAR(Pre-Assembled pipe Rack), PAU(Pre-Assembled Unit), VAU(Vendor Assembled Unit) and VPU(Vendor Package Unit). At the stage of design and fabrication of module, the condition of land and ocean transportation is considered and these conditions are reflected on the module division design. The control of the module's center of gravity is important to transport and install modules safely and the steel structure should have the strength enough to resist the sea acceleration force during the ocean transportation. The transportation condition and the installation method influence the size and weight of module. The size and weight of module are considered for the design of module division.

• Journal of the Korea Society of Computer and Information
• /
• v.22 no.7
• /
• pp.83-91
• /
• 2017

In this paper, we propose a thorough solution for adjusting virtual sound field with different kinds of devices and software in preliminary procedure and late stage of music processing. The basic process of music production includes composing, arranging and recording at pre-production stage as well as sound mixing and mastering at post-production stage. At the initial stage of music creation, it should be checked whether the design of virtual sound field, the choice of the tone and the instrument used in the arrangement match the virtual sound field required for the final work. In later recording, mixing and mastering, elaborate adjustments should be done to the virtual sound field. This study also analyzed how to apply the parameter of the effectors to the design and adjustment of the virtual sound field, making it the source of our creation.

• Journal of Korean Elementary Science Education
• /
• v.41 no.4
• /
• pp.754-770
• /
• 2022

For teachers, noticing refers to paying attention to something, indicating they interpret it and how they are willing to react to it in the context of their own instruction. Analysis of noticing features enables us to understand the overall characteristics of the teacher's lesson design, practice, and reflection, which are core agents in the educational design and implementation. This can also be taken to be the basis of education design for competency reinforcement for teachers. Therefore, in this study, the characteristics of noticing shown in teachers' reflections after class design and demonstration were identified. For this purpose, the self-reflection journals of 106 elementary pre-service teachers enrolled in the College of Education in Gangwon-do were analyzed. In particular, the journals were gathered that were written after the demonstration dealing with the change of gas volume by temperature in science class. After designing a noticing analysis frame consisting of the five dimensions 'agent', 'stage', 'topic', 'focus', and 'stance', the frequency and ratio of noticing by each dimension's components were derived. The frequency and ratio of noticing for the dimension of 'focus' were analyzed for the dimensions of 'stage' and 'topic'. The results of the study were as follows. For the dimension of 'agent', the frequency of teacher and student was the highest, and for the dimension of 'stage', inquiry activity was the highest. For the 'topic' dimension, class design according to the teaching strategy appeared most frequently, and in the 'focus' dimension, the cases that did not specify the goal of the class and the competencies to be achieved by the students appeared most frequently. In the 'stance' dimension, description showed the highest frequency. From the analysis of how the 'focus' changes according to the 'stage' and 'topic', it was found that a characteristic focus appeared for each component of the dimension. From these results, the implications of the noticing characteristics of pre-service teachers for the design and implementation of teacher education were discussed.

• Proceedings of the Korea Contents Association Conference
• /
• 2008.05a
• /
• pp.203-207
• /
• 2008

The production process of the 3D-animation roughly consists of the pre-production, the main-production and the post-production. The pre-production, which is not only the outset of whole procedure among them but also the process to predict and design overall plan collectively is the most important step. A much more specific and perfect pre-production structure is needed to produce a high quality 3D-animation. Moreover, the standard 3D efficient lighting model is gathering strength as 2D and 3D artworks which are completed in this step maintain colors and looks in the main as well as post-production consistently. This study will make up for the weak points and help both to predict the color range of the overall 3D-animation product and to promote the application range of the 3D lighting system on the pre-production stage by developing the standard 3D lighting model applicable on the early step and calculating its lighting parameter properties.

• ETRI Journal
• /
• v.43 no.4
• /
• pp.684-693
• /
• 2021

This paper presents a low-cost two-stage approximate multiplier for bfloat16 (brain floating-point) data processing. For cost-efficient approximate multiplication, the first stage implements Mitchell's algorithm that performs the approximate multiplication using only two adders. The second stage adopts the exact multiplication to compensate for the error from the first stage by multiplying error terms and adding its truncated result to the final output. In our design, the low-cost multiplications in both stages can reduce hardware costs significantly and provide low relative errors by compensating for the error from the first stage. We apply our approximate multiplier to the convolutional neural network (CNN) inferences, which shows small accuracy drops with well-known pre-trained models for the ImageNet database. Therefore, our design allows low-cost CNN inference systems with high test accuracy.

• Journal of the Society of Naval Architects of Korea
• /
• v.46 no.3
• /
• pp.325-334
• /
• 2009

Generally, functional design of FPSO has been done by the engineering firm designated by ship owner. Main equipment such as topside facility is imported from abroad. But sometimes, OFE (Owner Furnished Equipment) does not satisfy the PND (Product Need Date) of each production stage because the delivery date of OFE is not scheduled to satisfy the PND. And sometimes many loose items and equipment are complex from engineering which does not consider pre-outfitting. Main objective of this study is process improvements by maximizing pre-outfitting rate in the stage of equipping STP (Submerged Turret Production), one of main equipment on FPSO. In this study, we analyzed the factors which obstructed pre-equipping STP using the past records of FPSO projects.

• Human Ecology Research
• /
• v.61 no.3
• /
• pp.361-373
• /
• 2023

The purpose of this study is to develop and apply a teaching-learning plan of apartment house class to improve middle school students' empathy for home economics education and to verify its effect. The study was conducted in five stages: analysis, design, development, implementation, and evaluation using the ADDIE model. In the analysis phase, the study set learning objectives after analyzing how community housing is dealt with in the 2015 revised home economics curriculum and 12 current technology and home economics textbooks. In the design and development stage, in order to evaluate the validity of the experts and to improve the empathy ability, the study goal design, the composition of the learning elements, the development of the learning materials, and the pre and post-questionnaire for the students were developed. In the implementation stage, the empathic ability evaluation was carried out before and after the beginning of the first class by applying the teaching-learning process plan of the 8th class. In the evaluation stage, we examined whether the teaching-learning process developed in this study has a significant effect on empathy ability by evaluating the pre-post difference of empathy ability. As a result of examining the results of the pre - and post - evaluation of empathy ability for the results of this study, both cognitive and communicative factors were improved, and the apartment house class had a significant effect on the improvement of empathy ability.