• Journal of information and communication convergence engineering
• /
• 제6권1호
• /
• pp.29-33
• /
• 2008

This paper presents the proposal and hardware design of JPEG baseline encoder. The JPEG encoder system consists of line buffer, 2-D DCT, quantization, entropy encoding, and packer. A fully pipelined scheme for JPEG encoder is adopted to speed-up an image compression. The proposed architecture was described in VHDL and synthesized in Xilinx ISE 7.1i and simulated by modelsim 6.1i. The results showed that the performance of the designed JPEG baseline encoder is higher than that demanded by real-time applications for $1024{\times}768$ image size. The designed JPEG encoder IP can be easily integrated into various application systems, such as scanner, PC camera, color FAX, and network camera, etc.

• 한국통신학회논문지
• /
• 제21권5호
• /
• pp.1332-1344
• /
• 1996

This paper presents a pipelined floating point multiplier(FMUL) for superscalar microprocessors that conbines radix-16 recoding scheme based on signed-digit(SD) number system and new rouding and normalization scheme. The new rounding and normalization scheme enable the FMUL to compute sticky bit in parallel with multiple operation and elminate timing delay due to post-normalization. By expoliting SD radix-16 recoding scheme, we can achieves further reduction of silicon area and computation time. The FMUL can execute signle-precision or double-precision floating-point multiply operation through three-stage pipelined datapath and support IEEE standard 754. The algorithm andstructure of the designed multiplier have been successfully verified through Verilog HOL modeling and simulation.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제52권6호
• /
• pp.365-371
• /
• 2003

Input queued switch is useful for high bandwidth switches and routers because of lower complexity and fewer circuits than output queued. The input queued switch, however, suffers the HOL-Blocking, which limits its throughput to 58%. To overcome HOL-Blocking problem, many input-queued switch controlled by a scheduling algorithm. Most scheduling algorithms are implemented based on a centralized scheduler which restrict the design of the switch architecture. In this paper, we propose a simple scheduler called Pipelined Round Robin (PRR) which is intrinsically distributed by each input port. We presents to show the effectiveness of the proposed scheduler.

• 전자공학회논문지B
• /
• 제32B권3호
• /
• pp.11-23
• /
• 1995

In this paper, a parallel pipelined processor model which acts as a small VLIW processor architecture and a scheduling algorithm for extracting instruction-level parallelism on this architecture are proposed. The proposed model has a dual-instruction mode which has maximum 4 basic operations being executed in parallel. By combining these basic operations, variable instruction set can be designed for various applications. The scheduling algorithm schedules basic operations for parallel execution and removes pipeline hazards by examining data dependency and resource conflict relations. In order to examine operation and evaluate the performance,a C compiler and a simulator are developed. By simulating various test programs with the compiler and the simulator, the characteristics and the performance result of the proposed architecture are measured.

• 전자공학회논문지A
• /
• 제32A권12호
• /
• pp.220-228
• /
• 1995

An optimized 4-stage 12-bit pipelined CMOS analog-to-digital converter (ADC) architecture is proposed to obtain high linearity and high yield. The ADC based on a multiplying digital-to-analog converter (MDAC) selectively employs a binary-weighted-capacitor (BWC) array in the front-end stage and a unit-capacitor (UC) array in the back-end stages to improve integral nonlinearity (INL) and differential nonlinearity (DNL) simultaneously whil maintaining high yield. A digital-domain nonlinear error calibration technique is applied in the first stage of the ADC to improve its accuracy to 12-bit level. The largest DNL error in the mid-point code of the ADC is reduced by avoiding a code-error symmetry observed in a conventional digitally calibrated ADC is reduced by avoiding a code-error symmetry observed in a conventional digitally calibrated ADC is simulated to prove the effectiveness of the proposed ADC architecture.

• 한국통신학회논문지
• /
• 제32권10C호
• /
• pp.1019-1024
• /
• 2007

본 논문에서는 무선 랜 시스템용 10비트 20MHz 파이프라인 아날로그-디지털 변환기 설계를 위해서 Verilog-A 언어를 사용하여서 모델링하였다. 변환기내 샘플 / 홀드 증폭기, 비교기, MDAC 및 오차 보정 회로 등의 구성회로들을 각각 모델링해서 모의실험 한 결과 HSPICE를 이용한 모의 실험 시간보다 1/50배로 단축되어서 시스템 모델링에 적합함을 확인하였다.

• Progress in Superconductivity
• /
• 제9권2호
• /
• pp.157-161
• /
• 2008

Due to high speed operations and ultra low power consumptions RSFQ logic circuit is a very good candidate for future electronic device. The focus of the RSFQ circuit development has been on the advancement of analog-to-digital converters and microprocessors. Recent works on RSFQ ALU development showed the successful operation of an 1-bit block of ALU at 40 GHz. Recently, the study of an RSFQ analog-to-digital converter has been extended to the development of a single chip RF digital receiver. Compared to the voltage logic circuits, RSFQ circuits operate based on the pulse logic. This naturally leads the circuit structure of RSFQ circuit to be pipelined. Delay time on each pipelined stage determines the ultimate operating speed of the circuit. In simulations, a two junction Josephson transmission line's delay time was about 10 ps, a splitter's 14.5 ps, a switch's 13 ps, a half adder's 67 ps. Optimization of the 4-bit ALU circuit has been made with delay time consideration to operate comfortably at 10 GHz or above.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2006년도 하계종합학술대회
• /
• pp.651-652
• /
• 2006

In this paper, 4-way data path 128 point pipelined FFT processor with 4-way structure is proposed. The proposed FFT processor has 4-way structure in order to meet data requirement of MB-OFDM system at 132MHz operating frequency. The FFT processor is based on R4MDC and extended to suit 4-way data path. The FFT processor is designed by Verilog HDL and the gate count is about 88k.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2006년도 하계종합학술대회
• /
• pp.573-574
• /
• 2006

A low-power power-aware scalable pipelined Booth recoded multiply & Accumulate unit (PA-MAC) detects the input operands for their dynamic range and accordingly implements a 16-bit, 8-bit or 4-bit multiplication and accumulation operation. The multiplication mode is determined by the dynamic - range detection unit. For the computations, although an area of the proposed PA-MAC is lager than a non-scalable MAC respectively, the proposed PA-MAC proves to be globally more power efficient than a non-scalable MAC.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 추계학술대회 논문집 학회본부 B
• /
• pp.575-578
• /
• 1998

In this paper, we propose a VLSI architecture of Reed-Solomon decoder. Our goal is the development of an architecture featuring parallel and pipelined processing to improve the speed and low power design. To achieve the this goal, we analyze the RS decoding algorithm to be used parallel and pipelined processing efficiently, and modified the Euclid's algorithm arithmetic part to apply the parallel structure in RS decoder. The overall RS decoder are compared to Shao's, and we show the 10% area efficiency than Shao's time domain decoder and three times faster, in addition, we approve the proposed RS decoders with Altera FPGA Flex 10K-50, and Implemeted with LG 0.6{\mu}$ processing.