• JSTS:Journal of Semiconductor Technology and Science
• /
• 제12권1호
• /
• pp.46-52
• /
• 2012

Separate extraction of source ($R_S$) and drain ($R_D$) resistances caused by process, layout variations and long term degradation is very important in modeling and characterization of MOSFETs. In this work, we propose "Avalanche Hot-Source Method (AHSM)" for simple separated extraction of $R_S$ and $R_D$ in a single device. In AHSM, the high field region near the drain works as a new source for abundant carriers governing the current-voltage relationship in the MOSFET at high drain bias. We applied AHSM to n-channel MOSFETs as single-finger type with different channel width/length (W/L) combinations and verified its usefulness in the extraction of $R_S$ and $R_D$. We also confirmed that there is a negligible drift in the threshold voltage ($V_T$) and the subthreshold slope (SSW) even after application of the method to devices under practical conditions.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제16권2호
• /
• pp.210-214
• /
• 2016

In this paper, the decrease in the contact resistance of Ni germanide/Ge contact was studied as a function of the thickness of the antimony (Sb) interlayer for high performance Ge MOSFETs. Sb layers with various thickness of 2, 5, 8 and 12 nm were deposited by RF-Magnetron sputter on n-type Ge on Si wafers, followed by in situ deposition of 15nm-thick Ni film. The contact resistance of samples with the Sb interlayer was lower than that of the reference sample without the Sb interlayer. We found that the Sb interlayer can lower the contact resistance of Ni germanide/Ge contact but the reduction of contact resistance becomes saturated as the Sb interlayer thickness increases. The proposed method is useful for high performance n-channel Ge MOSFETs.

• 대한전기학회논문지
• /
• 제38권12호
• /
• pp.1041-1047
• /
• 1989

In recent years, a.c servomotors have been gradually replacing d.c servomotors in various high-performance applications such as machine tools and industrial robots. Inparticular, the high performance slip-frequency control of an induction motor, which is often called the vector control, is considered ane of th ebest a.c drives. In this paper, the transient state equations and vector control algorithms of an induction type servomotor are described mathematically by using the two- axis theory (d-q coordinates). According to the result of these algorithms, we scheme the speed control system for the motor in which the vector control is adopted to give high performance. Motor drive through a PWM inverter with power MOSFET is controlled so that the actual input current to the motor may track the current reference obtained from a micro-computer (8086 CPU). Driving experiments are performed in the range of 0 to 3000 rpm, and it is verified that high speed response is obtained for this system.

• 한국위성정보통신학회논문지
• /
• 제9권2호
• /
• pp.12-17
• /
• 2014

본 논문에서는 고전압에서 동작하는 마이크로칩의 안정하고 튼튼한 정전기 보호 성능을 구현하기 위해 이중 극성 소오스를 갖는 DPS_EDNMOS 변형소자가 제안되었다. 제안된 DPS는 N+ 소오스로 부터 전자 풍부 영역이 측면 확산되는 것을 방지하기 위해 N+ 소오스 측에 P+ 확산층을 의도적으로 삽입한 구조이다. 시뮬레이션 결과에 의하면 삽입된 P+ 확산층은 고전자 주입에 의해 발생하는 깊은 전자채널의 형성을 효과적으로 막아주고 있음을 알 수 있었다. 따라서 종래의 EDNMOS 표준소자에서 문제시 되었던 더블 스냅백 현상을 해결할 수 있었다.

• 한국위성정보통신학회논문지
• /
• 제7권2호
• /
• pp.18-24
• /
• 2012

본 논문에서는 ESD 방지를 위한 최적 방법론에 목표하여 확장된 드레인을 갖는 EDNMOS 소자의 더블 스냅백 현상 및 백그라운 도핑 농도 (BDC)의 영향을 조사하였다. 고전류 영역에서 낮은 BDC를 가진 EDNMOS 소자는 강한 스냅백으로 인해 취약한 ESD 성능과 높은 래치업 위험을 가지게 되나, 높은 BDC를 가진 EDNMOS 소자는 스냅백을 효과적으로 방지할 수 있음을 알 수 있었다. 따라서 BDC 제어로 안정적인 ESD 방지 성능과 래치업 면역을 구현할 수 있음을 밝혔다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 하계학술대회 논문집
• /
• pp.346-349
• /
• 2002

High Power and high dose ion implantation is essentially needed to make power MOSFET devices based on SiC wafers, because the diffusivities of the impurities such as Al, N, p, B in SiC crystal are very low. In addition, it is needed high temperature annealing for electrical activation of the implanted species. Due to the very high annealing temperature, the surface morphology after electrical activation annealing becomes very rough. We have found the different surface morphologies between implanted and unimplanted region. The unimplanted region showed smoother surface morphology It implies that the damage induced by high energy ion implantation affects the roughening mechanism. Some parts of Si-C bonding are broken in the damaged layer, s\ulcorner the surface migration and sublimation become easy. Therefore the macrostep formation will be promoted. N-type 4H-SiC wafers, which were Al ion implanted at acceleration energy ranged from 30kev to 360kev, were activated at 1600$^{\circ}C$ for 30min. The pre-activation annealing for damage relaxation was performed at 1100-1500$^{\circ}C$ for 30min. The surface morphologies of pre-activation annealed and activation annealed were characterized by atomic force microscopy(AFM).

• Journal of information and communication convergence engineering
• /
• 제11권4호
• /
• pp.288-292
• /
• 2013

In this paper, a carbon implant is investigated in detail from the perspectives of performance advantages and side effects for the thick n-type metal-oxide-semiconductor field-effect transistor (n-MOSFET). Threshold voltage ($V_{th}$) adjustment using a carbon implant significantly improves the $V_{th}$ mismatch performance in a thick (3.3-V) n-MOS transistor. It has been reported that a bad mismatch occurs particularly in the case of 0.11-${\mu}m$ $V_{th}$ node technology. This paper investigates a carbon implant process as a promising candidate for the optimal $V_{th}$ roll-off curve. The carbon implant makes the $V_{th}$ roll-off curve perfectly flat, which is explained in detail. Further, the mechanism of hot carrier injection lifetime degradation by the carbon implant is investigated, and new process integration involving the addition of a nitrogen implant in the lightly doped drain process is offered as its solution. This paper presents the critical side effects, such as Isub increases and device performance shifts caused by the carbon implant and suggests an efficient method to avoid these issues.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제44회 동계 정기학술대회 초록집
• /
• pp.438-439
• /
• 2013

Microelectronic devices의 접촉저항의 향상을 위해 Metal silicides의 형성 mechanism과 전기적 특성에 대한 연구가 많이 이루어지고 있다. 지난 수십년에 걸쳐, Ti silicide, Co silicide, Ni silicide 등에 대한 개발이 이루어져 왔으나, 계속적인 저저항 접촉 소재에 대한 요구에 의해 최근에는 Rare earth silicide에 관한 연구가 시작되고 있다. Rare-earth silicide는 저온에서 silicides를 형성하고, n-type Si과 낮은 schottky barrier contact (~0.3 eV)를 이룬다. 또한, 비교적 낮은 resistivity와 hexagonal AlB2 crystal structure에 의해 Si과 좋은 lattice match를 가져 Si wafer에서 high quality silicide thin film을 성장시킬 수 있다. Rare earth silicides 중에서 ytterbium silicide는 가장 낮은 electric work function을 갖고 있어 낮은 schottky barrier 응용에서 쓰이고 있다. 이로 인해, n-channel schottky barrier MOSFETs의 source/drain으로써 주목받고 있다. 특히 ytterbium과 molybdenum co-deposition을 하여 증착할 경우 thin film 형성에 있어 안정적인 morphology를 나타낸다. 또한, ytterbium silicide와 마찬가지로 낮은 면저항과 electric work function을 갖는다. 그러나 ytterbium silicide에 molybdenum을 화합물로써 높은 농도로 포함할 경우 높은 schottky barrier를 형성하고 epitaxial growth를 방해하여 silicide film의 quality 저하를 야기할 수 있다. 본 연구에서는 ytterbium과 molybdenum의 co-deposition에 따른 silicide 형성과 전기적 특성 변화에 대한 자세한 분석을 TEM, 4-probe point 등의 다양한 분석 도구를 이용하여 진행하였다. Ytterbium과 molybdenum을 co-deposition하기 위하여 기판으로 $1{\sim}0{\Omega}{\cdot}cm$의 비저항을 갖는 low doped n-type Si (100) bulk wafer를 사용하였다. Native oxide layer를 제거하기 위해 1%의 hydrofluoric (HF) acid solution에 wafer를 세정하였다. 그리고 고진공에서 RF sputtering 법을 이용하여 Ytterbium과 molybdenum을 동시에 증착하였다. RE metal의 경우 oxygen과 높은 반응성을 가지므로 oxidation을 막기 위해 그 위에 capping layer로 100 nm 두께의 TiN을 증착하였다. 증착 후, 진공 분위기에서 rapid thermal anneal(RTA)을 이용하여 $300{\sim}700^{\circ}C$에서 각각 1분간 열처리하여 ytterbium silicides를 형성하였다. 전기적 특성 평가를 위한 sheet resistance 측정은 4-point probe를 사용하였고, Mo doped ytterbium silicide와 Si interface의 atomic scale의 미세 구조를 통한 Mo doped ytterbium silicide의 형성 mechanism 분석을 위하여 trasmission electron microscopy (JEM-2100F)를 이용하였다.

• 한국전기전자재료학회논문지
• /
• 제16권7호
• /
• pp.557-563
• /
• 2003

SiC has been an useful material for the high voltage, high temperature, and high frequency devices, however, the required high process temperature to activate the implanted p-type dopants has hindered further developments. In this study, we report, for the first time, on the laser activation of implanted Al and non-alloyed Mo ohmic contacts and its application to MOSFET fabrication. The contact and sheet resistance measured from CTLM patterns have decreased by increasing laser power, and the lowest values are 3.9 $K\Omega$/$\square$ and 1.3 $\times$ 10$^{-3}$ $\Omega$-cm$^2$, respectively, at the power density of 1.45 J/cm$^2$ The n-MOSFETs fabricated on laser activated p-well exhibit well-behaved I-V characteristics and threshold voltage reduction by reverse body voltage. These results prove that the laser process for implant activation is an alternative low temperature technology applicable to SiC devices.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제1권2호
• /
• pp.95-102
• /
• 2001

Hafnium oxide thin films for gate dielectric were deposited at $300^{\circ}C$ on p-type Si (100) substrates by plasma enhanced chemical vapor deposition (PECVD) and annealed in $O_2$ and $N_2$ ambient at various temperatures. The effect of hydrogen treatment in 4% $H_2$ at $350^{\circ}C$ for 30 min on the electrical properties of $HfO_2$for gate dielectric was investigated. The flat-band voltage shifts of $HfO_2$capacitors annealed in $O_2$ambient are larger than those in $N_2$ambient because samples annealed in high oxygen partial pressure produces the effective negative charges in films. The oxygen loss in $HfO_2$films was expected in forming gas annealed samples and decreased the excessive oxygen contents in films as-deposited and annealed in $O_2$ or $N_2$ambient. The CET of films after hydrogen forming gas anneal almost did not vary compared with that before hydrogen gas anneal. Hysteresis of $HfO_2$films abruptly decreased by hydrogen forming gas anneal because hysteresis in C-V characteristics depends on the bulk effect rather than $HfO_2$/Si interface. The lower trap densities of films annealed in $O_2$ambient than those in $N_2$were due to the composition of interfacial layer becoming closer to $SiO_2$with increasing oxygen partial pressure. Hydrogen forming gas anneal at $350^{\circ}C$ for samples annealed at various temperatures in $O_2$and $N_2$ambient plays critical role in decreasing interface trap densities at the Si/$SiO_2$ interface. However, effect of forming gas anneal was almost disappeared for samples annealed at high temperature (about $800^{\circ}C$) in $O_2$ or $N_2$ambient.