• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.45 no.5
• /
• pp.1-11
• /
• 2008

This work proposes a 15b 50MS/s CMOS pipeline ADC based on digital code-error calibration. The proposed ADC adopts a four-stage pipeline architecture to minimize power consumption and die area and employs a digital calibration technique in the front-end stage MDAC without any modification of critical analog circuits. The front-end MDAC code errors due to device mismatch are measured by un-calibrated back-end three stages and stored in memory. During normal conversion, the stored code errors are recalled for code-error calibration in the digital domain. The signal insensitive 3-D fully symmetric layout technique in three MDACs is employed to achieve a high matching accuracy and to measure the mismatch error of the front-end stage more exactly. The prototype ADC in a 0.18um CMOS process demonstrates a measured DNL and INL within 0.78LSB and 3.28LSB. The ADC, with an active die area of $4.2mm^2$, shows a maximum SNDR and SFDR of 67.2dB and 79.5dB, respectively, and a power consumption of 225mW at 2.5V and 50MS/s.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.1A
• /
• pp.104-112
• /
• 2005

Some design techniques for high speed and low power pipelined 8-bit ADC are described. To perform high-speed operation with relatively low power consumption, open loop architecture is adopted, while closed loop architecture (with MDAC) is used in conventional pipeline ADC. A distributed track and hold amplifier and a cascading structure are also adopted to increase the sampling rate. To reduce the power consumption and the die area, the number of amplifiers in each stage are optimized and reduced with proposed zero-crossing point generation method. At 500-MHz sampling rate, simulation results show that the power consumption is 210mW including digital logic with 1.8V power supply. And the targeted ADC achieves ENOB of about 8-bit with input frequency up to 200-MHz and input range of 1.2Vpp (Differential). The ADC is designed using a $0.18{\mu}m$ 6-Metal 1-Poly CMOS process and occupies an area of $900{\mu}m{\times}500{\mu}m$

• Proceedings of the KIEE Conference
• /
• 2006.10c
• /
• pp.606-608
• /
• 2006

This paper describes a 8bit 10MS/s low power pipelined analog-to-digital converter(ADC). To reduce power consumption in proposed ADC, a high gain op-amp that consumes large power in MDAC(multiplying DAC) of conventional pipelined ADC is replaced with simple comparator and current sources. Moreover, differential charge transfer amplifier technique with latch in the sub-ADC reduces the power consumption to less than half compared with the conventional sub-ADC which use high speed comparator. The proposed ADC shows the power consumption of 1.8mW at supply voltage of 1.8V. This proposed ADC is suitable to apply to the portable display device. The circuit was implemented with 0.18um CMOS technology and the core size of circuit is 2.5mm${\times}$1mm.

• Proceedings of the IEEK Conference
• /
• 2008.06a
• /
• pp.559-560
• /
• 2008

In this paper, I proposed 10bits 40MS/s Pipelined A/D converter. The op-amps for SHA and MDAC designed folded-cascode amplifier with gain-booster. And the MOS transistors with a low threshold voltage are employed to low on-resistor and parasitic capacitance. The power dissipation is 119㎽ at 1.2V and 40MS/s

• Proceedings of the IEEK Conference
• /
• 2003.07b
• /
• pp.975-978
• /
• 2003

본 논문에서는 비디오 신호 인터페이스를 위해 10비트 50MHz ADC 를 설계하였으며 DCL(digital-error correction logic)을 갖는 3-3-3-4 구조의 파이프라인 방식을 사용하였다. SHA(sample and hold amplifier)와 MDAC (multiplying digital-to-analog converter)에 쓰이는 증폭기는 높은 이득을 갖도록 gain-boosting 기법을 적용하였으며, 전력소모와 면적을 줄이기 위해 capacitor scaling 기법을 적용하였다. 본 ADC 는 0.35 μm double-poly four-metal n-well CMOS 공정으로 설계 및 제작하였으며, 전체 회로는 3.3V 단일 전원 전압에서 동작하도록 설계하였다. 측정 결과 5MHz 의 입력을 인가하였을 때 SNDR 은 56.7dB, 전체 전력 소모는 112mW 이며, 입출력 단의 패드를 포함한 전체 칩 면적은 2.6mm×2.6mm이다.

• Proceedings of the IEEK Conference
• /
• 2003.07b
• /
• pp.1197-1200
• /
• 2003

This paper presents A/D converter for the signal processing of infrared sensor and CMOS image sensor. The A/D converter designed in a 0.25um CMOS process provides a resolution of 10bits at a sampling rate of 50MS/s while dissipating 67mW at 2.5V supply voltage. This A/D converter is based on a pipeline architecture in which the number of bits converted per stage and the stage number are optimized to achieve the desired linearity and reduce power consumption as well. Simulation results show that the A/D converter using 1.5bit per stage MDAC with switched capacitors and dynamic comparators efficiently reduces the power consumption.

• Proceedings of the IEEK Conference
• /
• 1999.11a
• /
• pp.263-266
• /
• 1999

In this work, a A/D converter is implemented to obtain 8bit resolution at a conversion rate of 10MS/s for video applications. This architecture is proposed using the Pipelined architecture for high speed conversion rate and the Successive - Approximation architecture for low power consumption, and consists of two identical stages that consist of sample/hold circuit, low power comparator, voltage reference circuit and MDAC of binary weighted capacitor array. Proposed A/D converter is designed using 0.25${\mu}{\textrm}{m}$ CMOS technology The SNR is 80㏈ at a sampling rate of 10MHz with 1.95MHz sine input signal. When an 8bit 10MS/s A/D converter is simulated, the Differential Nonlinearity / Integral Nonlinearity (DNL/ INL) error are $\pm$0.5 / $\pm$2 LSB, respectively. The power consumption is 13㎽ at 10MS/s.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.32A no.12
• /
• pp.220-228
• /
• 1995

An optimized 4-stage 12-bit pipelined CMOS analog-to-digital converter (ADC) architecture is proposed to obtain high linearity and high yield. The ADC based on a multiplying digital-to-analog converter (MDAC) selectively employs a binary-weighted-capacitor (BWC) array in the front-end stage and a unit-capacitor (UC) array in the back-end stages to improve integral nonlinearity (INL) and differential nonlinearity (DNL) simultaneously whil maintaining high yield. A digital-domain nonlinear error calibration technique is applied in the first stage of the ADC to improve its accuracy to 12-bit level. The largest DNL error in the mid-point code of the ADC is reduced by avoiding a code-error symmetry observed in a conventional digitally calibrated ADC is reduced by avoiding a code-error symmetry observed in a conventional digitally calibrated ADC is simulated to prove the effectiveness of the proposed ADC architecture.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2004.10a
• /
• pp.319-322
• /
• 2004

The Share and the importance of service industry have been grown up consistently, especially the diffusion of internet for past decade stimulates rapid expansions of it. However, research areas about service industry still remain relatively unexplored. This research regards a web site as a package of various service units, and proposes a framework that maps service units into 2-dimensional space using MDAC to find uncovered service area for the requirements of customers, This framework is expected to help to find weak service areas of current web site, and to bring useful information for the outset stage of NSC.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.43 no.11 s.353
• /
• pp.48-57
• /
• 2006

This work describes a 12b 200KHz 0.52mA $0.47mm^2$ algorithmic ADC for sensor applications such as motor controls, 3-phase power controls, and CMOS image sensors simultaneously requiring ultra-low power and small size. The proposed ADC is based on the conventional algorithmic architecture with recycling techniques to optimize sampling rate, resolution, chip area, and power consumption. The input SHA with eight input channels for high integration employs a folded-cascode architecture to achieve a required DC gain and a sufficient phase margin. A signal insensitive 3-D fully symmetrical layout with critical signal lines shielded reduces the capacitor and device mismatch of the MDAC. The improved switched bias power-reduction techniques reduce the power consumption of analog amplifiers. Current and voltage references are integrated on the chip with optional off-chip voltage references for low glitch noise. The employed down-sampling clock signal selects the sampling rate of 200KS/s or 10KS/s with a reduced power depending on applications. The prototype ADC in a 0.18um n-well 1P6M CMOS technology demonstrates the measured DNL and INL within 0.76LSB and 2.47LSB. The ADC shows a maximum SNDR and SFDR of 55dB and 70dB at all sampling frequencies up to 200KS/s, respectively. The active die area is $0.47mm^2$ and the chip consumes 0.94mW at 200KS/s and 0.63mW at 10KS/s at a 1.8V supply.