• Management Science and Financial Engineering
• /
• v.6 no.1
• /
• pp.1-19
• /
• 2000

This papeer proposes a general approach of the multivariate expontially weighted moving average(MEWMA) chart, in which the smoothing matrix has full elements instead of only diagonal elements. The average run length (ARL) properties of this scheme are examined for a diverse set of quality control environments and the information to design the chhart is provied. Performance of the scheme is measured by estmating ARL and compared to those of two group cumulative sum (CUSUM) chats. The comparison resullts show that the MEWMA chart can improve its ARL performance in detecting a small shifts out-of-control in the start-up stage, the general MEWMA chart of a full smoothing matrix appears to offer an exceptional protection aginst departures from control in the process mean.

• Journal of Korean Society for Quality Management
• /
• v.30 no.2
• /
• pp.99-117
• /
• 2002

Variable sampling interval(VSI) and variable sample size(VSS) control charts vary the sampling rate for the next sample depending on the current chart statistic. This paper develops EWMA charts with the VSI and VSS features, and investigates the effectiveness of these charts in context of an economic model. The economic properties of these charts are evaluated by using Markov chain methods. The model contains cost parameters which allow the specification of the costs associated with sampling, false alarms, and operating off target. This economic model can be used to quantify the cost saving that can be obtained by using control charts with the VSI and VSS features instead of with the fixed sampling rate(FSR) feature, and can also be used to gain insight into the way that control charts with the VSI and VSS features should be designed to achieve optimal economic performance. The economic performance of X charts with the VSI and VSS features is also considered.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.18 no.1
• /
• pp.22-28
• /
• 2009

In order to optimize the polishing process, Run to Run control scheme has been applied to the micro mold polishing in this study. Also, to fully understand the effect of parameters on the surface roughness a design of experiment is performed. By linear approximation of main factors such as gap and rotational speed of micro quill, EWMA (Exponential Weighted Moving Average) gradual mode controller is adopted as a optimizing tool. Consequently, the process converged quickly at a target value of surface roughness Ra 10nm and Rmax 50nm, and was hardly affected by unwanted process noises like initial surface quality and wear of magnetic abrasives.

• The Korean Journal of Applied Statistics
• /
• v.30 no.1
• /
• pp.1-12
• /
• 2017

Many stochastic processes satisfy the Markov property exactly or at least approximately. An interested property in the Markov process is the first passage time. Since the sequential analysis by Wald, the approximation of the first passage time has been studied extensively. The Statistical computing technique due to the development of high-speed computers made it possible to calculate the values of the properties close to the true ones. This article introduces an exponentially weighted moving average (EWMA) control chart as an example of the Markov process, and studied how to calculate the average run length with problematic issues that should be cautioned for correct calculation. The results derived for approximation of the first passage time in this research can be applied to any of the Markov processes. Especially the approximation of the continuous time Markov process to the discrete time Markov chain is useful for the studies of the properties of the stochastic process and makes computational approaches easy.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.30 no.4
• /
• pp.1-14
• /
• 2005

We propose a VSSI-CRL(Variable Sampling Size and Samplina Interval-Conforming Run length) synthetic control chart in order to improve the statistical characteristics of both the VSSI chart and the CRL synthetic chart. The VSSI-CRL chart utilizes VSSI sampling scheme, but it produces a signal only when the CRI is less than a given limit. An algorithm for calculating the ARL(Average Run length) and ATS(Average Time to Signal) of the VSSI-CRL chart is developed by employing Markov chain method. We present some lemmas for describing the statistical characteristics of the VSSI-CRL chart under in-control state. A procedure for designing the VSSI-CRL chart is proposed based on the lemmas. Extensive comparative studios show that the VSSI-CRL chart is superior to the CRL synthetic chart or the VSSI chart in general, and is comparable to the EWMA chart in ATS performance.

• Journal of Communications and Networks
• /
• v.7 no.3
• /
• pp.385-393
• /
• 2005

In this paper, we propose a simple algorithm to adaptively adjust the value of dupthresh, the duplicate acknowledgement threshold that triggers the transmission control protocol (TCP) fast retransmission algorithm, to improve the TCP performance in a network environment with persistent packet reordering. Our algorithm uses an exponentially weighted moving average (EWMA) and the mean deviation of the lengths of the reordering events reported by a TCP receiver with the duplicate selective acknowledgement (DSACK) extension to estimate the value of dupthresh. We also apply an adaptive upper bound on dupthresh to avoid the retransmission timeout events. In addition, our algorithm includes a mechanism to exponentially reduce dupthresh when the retransmission timer expires. With these mechanisms, our algorithm is capable of converging to and staying at a near-optimal interval of dupthresh. The simulation results show that our algorithm improves the protocol performance significantly with minimal overheads, achieving a greater throughput and fewer false fast retransmissions.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.22 no.51
• /
• pp.1-10
• /
• 1999

In recent industry society, it is revealed that, as an increase in the use of automated manufacturing and process inspection technology, the data from mass production system exhibits some degrees of autocorrelation. The operation characteristics of traditional control charts developed under the independence assumption are adversely affected by the presence of serial correlation. Therefore, when autocorrelated construction contacted with time-series models explain, the time-series models are the Box-Jenkins forecast models which have been proposed as the best forecasting tool which allows for partitioning of variation into result from the autocorrelation structure and variation due to unusual but assignable causes. In this paper, for the AR(1) process of Box-Jenkins forecast models, when the constant term ξ are zero and different from zero, I want to analyze the sensitivity of (equation omitted), CUSUM and EWMA control chart for forecast residuals.

• Journal of Korean Society for Quality Management
• /
• v.35 no.1
• /
• pp.24-34
• /
• 2007

This paper investigates the average run length (ARL) of a selectively moving average (S-MA) control chart. The S-U chart is designed to detect shifts in the process mean. The basic idea of the S-MA chart is to accumulate previous samples selectively in order to increase the sensitivity. The ARL of the S-MA chart was shown to be monotone decreasing with respect to the decision length in a previous research [3]. This paper derives the steady-state ARL in a closed-form and shows that the monotone property is resulted from head-start assumption. The steady-state ARL is shown to be a sum of head-start ARL and an additional term. The statistical design procedure for the S-MA chart is revised according to this result. Sensitivity study shorts that the steady-state ARL performance is still better than the CUSUM chart or the Exponentially Weighted Moving Average (EWMA) chart.

• Journal of the Korean Data and Information Science Society
• /
• v.28 no.5
• /
• pp.981-999
• /
• 2017

In the standard control chart assuming a simple random model, we estimate the process variance without considering the between-sample variance. If the between-sample exists in the process, the process variance is under-estimated. When the process variance is under-estimated, the narrower control limits result in the excessive false alarm rate although the sensitivity of the control chart is improved. In this paper, using the variance component model to incorporate the between-sample variance, we set the control limits using both the within- and between-sample variances, and evaluate the efficiency of the control chart in terms of the average run length (ARL). Considering the most widely used control chart types such as ${\bar{X}}$, EWMA and CUSUM control charts, we compared the differences between two cases, Case I and Case II, where the between-sample variance is ignored and considered, respectively. We also considered the two cases when the process parameters are given and estimated. The results showed that the false alarm rate of Case I increased sharply as the between-sample variance increases, while that of Case II remains the same regardless of the size of the between-sample variance, as expected.

• Journal of Korean Society for Quality Management
• /
• v.33 no.3
• /
• pp.126-134
• /
• 2005

This paper proposes a selectively cumulative sum(S-CUSUM) control chart for detecting shifts in the process mean. The basic idea of the S-CUSUM chart is to accumulate previous samples selectively in order to increase the sensitivity. The S-CUSUM chart employs a threshold limit to determine whether to accumulate previous samples or not. Consecutive samples with control statistics out of the threshold limit are to be accumulated to calculate a standardized control statistic. If the control statistic falls within the threshold limit, only the next sample is to be used. During the whole sampling process, the S-CUSUM chart produces an 'out-of-control' signal either when any control statistic falls outside the control limit or when L -consecutive control statistics fall outside the threshold limit. The number L is a decision variable and is called a 'control length'. A Markov chain approach is employed to describe the S-CUSUM sampling process. Formulae for the steady state probabilities and the Average Run Length(ARL) during an in-control state are derived in closed forms. Some properties useful for designing statistical parameters are also derived and a statistical design procedure for the S-CUSUM chart is proposed. Comparative studies show that the proposed S-CUSUM chart is uniformly superior to the CUSUM chart or the Exponentially Weighted Moving Average(EWMA) chart with respect to the ARL performance.