• 한국전자파학회논문지
• /
• 제17권2호
• /
• pp.171-177
• /
• 2006

클락 유지 기능을 가지는 저가의 고성능 40 Gb/s 클락 복원기를 위상 고정 루프를 적용하여 설계 및 제작하였다. 클락 복원기는 클락 추출기, RF 믹서, 주파수 판별기, 위상 변환기, 클락 유지 회로로 구성되어 있다. 추출된 40 GHz 클락은 10 GHz 유전체 공진 발진기와 위상이 동기된다. 위상 고정 루프를 사용한 클락 복원기는 기존의 유전체 공진 필터를 사용한 개방형 클락 복원기에 비해 클락의 안정성과 지터 특성이 크게 향상되었다. 측정된 지터의 실효치는 230 fs였다. 또한 입력 신호가 끊어질 경우, 유지 회로에 의해 연속적인 클락 유지가 가능하였다.

• 한국정보통신학회논문지
• /
• 제19권5호
• /
• pp.1104-1109
• /
• 2015

디지털 콘텐츠의 급속한 발전으로 미래의 요구에 부합할 수 있는 고속의 보안 암호 알고리즘 설계는 중요하다. 본 논문에서는 기존의 수열 발생기 보다 더 높은 처리율을 갖는 자체 수축형 LM-128 합산 수열 발생기를 제안한다. 임계 클럭 조절형 LM-128의 설계하고 구현하여 더 낮은 클럭 사이클을 가져서 더 높은 키 수열 발생 속도를 증명한다. 제안된 임계 클럭 조절형 발생기는 128비트 비밀 키와 초기 벡터를 갖는 내부 상태 256비트로 구성되어진다. 128-비트의 보안 수준의 암호는 고화질 및 고품질의 디지털 콘텐츠 보안에 적합하다.

• 한국초전도저온공학회:학술대회논문집
• /
• 한국초전도저온공학회 2003년도 학술대회 논문집
• /
• pp.189-192
• /
• 2003

Inductivity Superconducting Fault Current Limiter is the Magnet that uses high temperature Superconductivity Coil. It is an important work that it controls Electric Power Converter of Inductivity SFCL. So, we wish to design the point part FPGA by One-Chip. Design of that can divide as following. One part that generate clock that offer to thyristor. One part that set 60Hz voltage to input Clock and do count. One part that change the value that require in CPU to the integer. And finally. there is part that send output (the fixed Clock) to the thyristor.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 ITC-CSCC -1
• /
• pp.379-382
• /
• 2000

We designed a self-timed interface circuit for efficient communication in IP (Intellectual Property)-based system with high-speed self-timed FIFO and a set of self-timed event logic library with 0.25um CMOS technology. Optimized self-timed standard cell layouts and Verilog models are generated for top-down design methodology. A method for mitigating a design bottleneck when it comes to tolerate clock skew is described. With clock control method and FIFO, we implemented high-speed 32bit-interface chip for self-timed system, which generated maximum system clock is 2.2GHz. The size of the core is about 1.1mm x 1.1mm.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권1호
• /
• pp.993-996
• /
• 2007

Depending on applications where transmission bandwidth, wire distance, power consumption and EMI environments vary, design trade-offs must be made to optimize the display interface. After introducing the digital display interface architecture, topics such as cost, EMI, signal integrity, scalability and content protection are discussed with available techniques. Implementation issues are discussed regarding their cost and design complexity. Existing standards are reviewed and comparison on their strengths and shortcomings are discussed.

• ETRI Journal
• /
• 제34권1호
• /
• pp.35-43
• /
• 2012

This paper presents a delay-locked-loop-based clock and data recovery (CDR) circuit design with a nB(n+2)B data formatting scheme for a high-speed serial display interface. The nB(n+2)B data is formatted by inserting a '01' clock information pattern in every piece of N-bit data. The proposed CDR recovers clock and data in 1:10 demultiplexed form without an external reference clock. To validate the feasibility of the scheme, a 1.7-Gbps CDR based on the proposed scheme is designed, simulated, and fabricated. Input data patterns were formatted as 10B12B for a high-performance display interface. The proposed CDR consumes approximately 8 mA under a 3.3-V power supply using a 0.35-${\mu}m$ CMOS process and the measured peak-to-peak jitter of the recovered clock is 44 ps.

• 전기학회논문지
• /
• 제56권6호
• /
• pp.1133-1138
• /
• 2007

DLLs(Delay Locked Loops) have widely been used in many systems in order to achieve the clock synchronization. A SMD (Synchronous Mirror Delay) structure is used both for skew reduction and for DCC (Duty Cycle Correction). In this paper, a SMD based DLL with DCC using Reduced Delay Lines is proposed in order to reduce the clock skew and correct the duty cycle. The merged structure allows the forward delay array to be shared between the DLL and the DCC, and yields a 25% saving in the number of the required delay cells. The designed chip was fabricated using a $0.25{\mu}m$ 1-poly, 4-metal CMOS process. Measurement results showed the 3% duty cycle error when the input signal ranges from 80% to 20% and the clock frequency ranges from 400MHz to 600MHz. The locking operation needs 3 clock and duty correction requires only 5 clock cycles as feature with SMD structure.

• 전기학회논문지
• /
• 제61권11호
• /
• pp.1695-1699
• /
• 2012

This paper is proposed all digital wide-range clock and data recovery circuit. The Proposed clock data recovery circuit is possible input data rate which is suggested is wide-range that extends from 100Mb/s to 3Gb/s and used an phase error detector which can use a way of over-sampling a data by using a 1/2-rate multi-phase clock and phase rotator which is regular size per $2{\pi}$/16 and can make a phase rotation. So it could make the phase rotating in range of input data rate. Also all circuit is designed as a digital which has a specificity against a noise. This circuit is designed to 0.13um CMOS process and verified simulation to spectre tool.

• 전기학회논문지
• /
• 제60권2호
• /
• pp.455-458
• /
• 2011

4:10 deserializer is proposed to recover 1:10 serial data using 1/4-rate clock. And then, 1/4-rate CDR(Clock and Data Recovery) circuit was designed for SERDES of high-speed serial display interface. The reduction of clock frequency using 1/4-rate clocking helps relax the speed limitation when higher data transfer is demanded. This circuit is composed of 1/4-rate sampler, PEL(Phase Error Logic), Majority Voting, Digital Filter, DPC(Digital to Phase Converter) and 4:10 deserializer. The designed CDR has been designed in a standard $0.18{\mu}m$ 1P6M CMOS technology and the recovered data jitter is 14ps in simulation.

• Journal of Electrical Engineering and Technology
• /
• 제13권6호
• /
• pp.2479-2484
• /
• 2018

The filter bank multicarrier modulation (FBMC) technique is one of multicarrier modulation technique (MCM), which is mainly used to improve channel capacity of cognitive radio (CR) network and frequency spectrum access technique. The existing FBMC System contains serial to parallel converter, normal QAM modulation, Radix2 inverse FFT, parallel to serial converter and poly phase filter. It needs high area, delay and power consumption. To further reduce the area, delay and power of FBMC structure, a new clock gating technique is applied in the QAM modulation, radix2 multipath delay commutator (R2MDC) based inverse FFT and unified addition and subtraction (UAS) based FIR filter with parallel asynchronous self time adder (PASTA). The clock gating technique is mainly used to reduce the unwanted clock switching activity. The clock gating is nothing but clock signal of flip-flops is controlled by gate (i.e.) AND gate. Hence speed is high and power consumption is low. The comparison between existing QAM and proposed QAM with clock gating technique is carried out to analyze the results. Conversely, the proposed inverse R2MDC FFT with clock gating technique is compared with the existing radix2 inverse FFT. Also the comparison between existing poly phase filter and proposed UAS based FIR filter with PASTA adder is carried out to analyze the performance, area and power consumption individually. The proposed FBMC with clock gating technique offers low power and high speed than the existing FBMC structures.