• Proceedings of the IEEK Conference
• /
• 2004.06b
• /
• pp.545-548
• /
• 2004

The paper describes the design of high-speed, high-resolution Sample-and-Hold circuit which shows the conversion rate 80MHz and the power supply of 3.3v with 0.35um CMOS 2-poly 4-metal process for high-speed, high resolution Analog-to-Digital Converter. For improving Dynamic performance of Sample-and-Hold, Two Double bootstrap switch and high performance operational amplifier with gain booster, which are used. and For physical stability of Sample and Hold circuit, reduces excess voltage of gate in bootstrap switch. Simulation results using HSPICE shows the SFDR of 71dB, 75dB in conversion rate of 80MHz result for two inputs(0.5Vpp, 10MHz and 1Vpp, 10MHz) and the power dissipation of 48mW at single 3.3V supply voltage.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.38 no.3
• /
• pp.44-44
• /
• 2001

본 논문에서는 CMOS로 구현된 3.3V 8-bit 200MSPS의 Folding / Interpolation 구조의 A/D 변환기를 제안한다. 회로에 사용된 구조는 FR(Folding Rate)이 8, NFB(Number of Folding Block)가 4, Interpolation rate 이 8이며, 분산 Track and Hold 구조를 회로를 사용하여 Sampling시 입력주파수를 Hold하여 높은 SNDR을 얻을 수 있었다. 고속동작과 저 전력 기능을 위하여 향상된 래치와 디지털 Encoder를 제안하였고 지연시간 보정을 위한 회로도 제안하였다. 제안된 ADC는 0.35㎛, 2-Poly, 3-Metal, n-well CMOS 공정을 사용하여 제작되었으며, 유효 칩 면적은 1070㎛×650㎛ 이고, 3.3V전압에서 230mW의 전력소모를 나타내었다. 입력 주파수 10MHz, 샘플링 주파수 200MHz에서의 INL과 DNL은 ±1LSB 이내로 측정되었으며, SNDR은 43㏈로 측정되었다.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.38 no.3
• /
• pp.51-51
• /
• 2001

본 논문에서는 CMOS 로직과 pass-transistor logic(PTL)의 장점만을 가진 새로운 복합모드로직(Compound Mode Logic)을 제안하였다. 제안된 로직은 VLSI설계에서 중요하게 부각되고 있는 저전력, 고속 동작이 가능하며 실제로 전가산기를 설계하여 측정 한 결과 복합모드 로직의 power-delay 곱은 일반적인 CMOS로직에 비해 약 22% 개선되었다 제안한 복합모드 로직을 이용하여 고성능 32×32-bit 곱셈기를 설계 제작하였다. 본 논문의 곱셈기는 개선된 사인선택(Sign Select) Booth 인코더, 4-2 및 9-2 압축기로 구성된 데이터 압축 블록, 그리고 carry 생성 블록을 분리한 64-bit 조건 합 가산기로 구성되어 있다. 0.6um 1-poly 3-metal CMOS 공정을 이용하여 제작된 32×32-bit 곱셈기는 28,732개의 트랜지스터와 1.59×l.68 ㎜2의 면적을 가졌다. 측정 결과 32×32-bit 곱셈기의 곱셈시간은 9.8㎱ 이었으며, 3.3V 전원 전압에서 186㎽의 전력 소모를 하였다.

• Proceedings of the IEEK Conference
• /
• 2006.06a
• /
• pp.621-622
• /
• 2006

This paper presents the design of LVDS(Low-Voltage-Differential-Signaling) driver circuit for Gb/s-per-pin operation using BiCMOS process technology. To reduce chip area, LVDS driver's switching devices were replaced with lateral bipolar devices. The designed lateral bipolar transister's common emitter current gain($\beta$) is 20 and device's emitter size is 2*10um. Also the proposed LVDS driver is operated at 2.5V and the maximum data rate is 2.8Gb/s approximately.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.47 no.12
• /
• pp.48-54
• /
• 2010

This paper presents a high-performance architecture of integer-pel motion estimation circuit for H.264 video CODEC. Full search algorithm guarantees the best results by examining all candidate blocks. However, the full search algorithm requires a huge amount of computation and data. Many fast search algorithms have been proposed to reduce the computational efforts. The disadvantage of these algorithms is that data access from or to memory is very irregular and data reuse is difficult. In this paper, we propose an efficient integer-pixel motion estimation algorithm and the circuit architecture to improve the processing speed and reduce the external memory bandwidth. The proposed circuit supports seven kinds of variable block sizes and generates 41 motion vectors. We described the proposed high-performance motion estimation circuit at R1L and verified its operation on FPGA board. The circuit synthesized by using l30nm CMOS standard cell library processes 139.8 1080HD ($1,920{\times}1,088$) image frames per second and supports up to H.264 level 5.1.

• Journal of the Institute of Electronics Engineers of Korea TE
• /
• v.39 no.1
• /
• pp.16-21
• /
• 2002

In this paper, a dual type PFD(Phase Frequency Detector) for high speed PLL to improve output characteristics using TSPC(True Single Phase Clocking) circuit is proposed. The conventional 3-state PFD has problems with large dead-zone and long delay time. Therefore, it is not applicable to high-speed PLL(Phase-Locked Loop). A dynamic PFD with dynamic CMOS logic circuit is proposed to improve these problems. But, it has the disadvantage of jitter noise due to the variation of the duty cycle. In order to solve the problems of previous PFD, the proposed PFD improves not only the dead zone and duty cycle but also jitter noise and response characteristics by the TSPC circuit and dual structured PFD circuit. The PFD is consists of a P-PFD(Positive edge triggered PFD) and a N-PFD(Negative edge triggered PFD) and improves response characteristics to increase PFD gain. The Hspice simulation is performed to evaluate the performance of proposed PFD. From the experimental results, it has the better dead zone, duty cycle and response characteristics than conventional PFDs.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.40 no.5
• /
• pp.312-320
• /
• 2003

This work describes an 8b 200 MHz 0.18 urn CMOS analog-to-digital converter (ADC) based on a pipelined architecture for flat panel display applications. The proposed ABC employs an improved bootstrapping technique to obtain wider input bandwidth than the sampling tate of 200 MHz. The bootstrapuing technique improves the accuracy of the input sample-and-hold amplifier (SHA) and the fast fourier transform (FFT) analysis of the SHA outputs shows the 7.2 effective number of bits with an input sinusoidal wave frequency of 500 MHz and the sampling clock of 200 MHz at a 1.7 V supply voltage. Merged-capacitor switching (MCS) technique increases the sampling rate of the ADC by reducing the number of capacitors required in conventional ADC's by 50 % and minimizes chip area simultaneously. The simulated ADC in a 0.18 um n-well single-poly quad-metal CMOS technology shows an 8b resolution and a 73 mW power dissipation at a 200 MHz sampling clock and a 1.7 V supply voltage.

• Proceedings of the Optical Society of Korea Conference
• /
• 2009.02a
• /
• pp.241-242
• /
• 2009

도플러 효과를 이용해 피부의 혈류 속도 분포를 측정하였다. 고속 CMOS 이미지 센서를 사용하여 $256{\times}256$ 픽셀의 크기를 갖는 혈류 속도 영상을 측정하였다. 많은 의학 치료 분야에서 혈류 흐름에 대한 영상, 특히 모세혈관에서의 혈류 흐름에 대한 영상을 필요로 한다. 레이저 도플러 기술은 물체의 속도를 물체에 접촉하지 않고 측정할 수 있는 대표적인 기술로, 레이저 광의 코헤런트한 특성과 비접촉성 특성은 인체 피부의 혈류 속도를 측정하는데 좋은 특성을 제공한다.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.10
• /
• pp.239-244
• /
• 2013

This paper presents a design of the CMOS LDO regulator with a UVLO protection function for a high speed PMIC. Proposed LDO regulator circuit consists of a BGR reference circuit, an error amplifier and a power transistor and so on. UVLO block between the power transistor and the power supply is added for a low input protection function. Also, UVLO block showed normal operation with turn-off voltage of 2.7V and turn-on voltage of 4 V in condition of 5 V power supply. Proposed circuit generated fixed 3.3 V from a supply of 5V. From SPICE simulation results using a $1{\mu}m$ high voltage CMOS technology, simulation results were 5.88 mV/V line regulation and 27.5 uV/mA load regulation with load current 0 mA to 200 mA.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.18 no.2
• /
• pp.285-290
• /
• 2023

Compressors are widely used in high-speed electronic systems and are used to reduce the number of operands in multiplier. The proposed compressor is constructed based on the m-GDI(: modified gate diffusion input) to reduce the propagation delay time. This paper is compared the performance of compressors by applying 4-2, 5-2 and 6-2 m-GDI compressors to the multiplier, respectively. As a simulation results, compared to the 8-bit Dadda multiplier using the 4-2 and 6-2 compressor, the multiplier using the 5-2 compressor is reduced propagation delay time 13.99% and 16.26%, respectively. Also, the multiplier using the 5-2 compressor is reduced PDP(: Power Delay Product) 4.99%, 28.95% compared to 4-2 and 6-2 compressor, respectively. However, the multiplier using the 5-2 compression circuit is increased power consumption by 10.46% compared to the multiplier using the 4-2 compression circuit. In conclusion, the 8-bit Dadda multiplier using the 5-2 compressor is superior to the multipliers using the 4-2 and 6-2 compressors. The proposed circuit is implemented using TSMC 65nm CMOS process and its feasibility is verified through SPECTRE simulation.