• E2M - 전기 전자와 첨단 소재
• /
• 제8권6호
• /
• pp.708-714
• /
• 1995

We have discussed the buried-channel(BC) behavior through the subthreshold characteristics of submicron PMOSFET device fabricated with twin well CMOS process. In this paper, we have guessed the initial conditions of ion implantation using process simulation, obtained the subthreshold characteristics as a function of process parameter variation such as threshold adjusting ion implant dose($D_c$), channel length(L), gate oxide thickness($T_ox$) and junction depth of source/drain($X_j$) using device simulation. The buried channel behavior with these process prarameter variation were showed apparent difference. Also, the fabricated pMOSFET device having different channel length represented good S.S value and low leakage current with increasing drain voltage.

• 전자공학회논문지A
• /
• 제33A권10호
• /
• pp.130-138
• /
• 1996

The size of a device needs to scale down to increase its integrity and speed. As the size of the device is reduced, the hot-carrier degradation that severely effects on device reliabilty is concerned. In this paper, sub-micron buried-channel P-MOSFETs were fabircated, and the hot-carrier effects were invetigated. Also the hot-carrier effect in the buired-channel P-MOSFETs and the surface-channel P-MOSFETs were compared with simulation programs using SUPREM-4 and MINIMOS-4. This paper showed that the electric characteristics of sub-micron P-MOSFET are different from those of N-MOSFET. Also it showed that the punchthrough voltage ( $V_{pt}$ ) was abruptly drop after applying the stress and became almost 0V when the channel lengths were shorter than 0.6.mu.m. The lower punchthrough voltage causes the device to operte poorly by the deterioration of cut-off characteries in the switching mode. We can conclude that the buried channel P-MOSFET for CMOS circuits has a limit of the channel length to be around 0.6.mu.m.

• Journal of Electrical Engineering and Technology
• /
• 제2권2호
• /
• pp.267-273
• /
• 2007

A depletion-mode MOSFET has been analyzed to evaluate its electrical behavior using a novel 3-D numerical simulation package. The characterizing analysis of the BC MOSFET was performed through short-channel narrow-channel and small-geometry effects that are investigated, in detail, in terms of the threshold voltage. The DIBL effect becomes significant for a short-channel device with a channel length of $<\;3({\mu}m)$. For narrow-channel devices the variation of the threshold voltage was sharp for $<4({\mu}m)$ due to the strong narrow-channel effect. In the case of small-geometry devices, the shift of the threshold voltage was less sensitive due to the combination of the DIBL and substrate bias effects, as compared with that observed from the short-channel and narrow-channel devices. The characterizing analysis of the narrow-channel and small-geometry devices, especially with channel width of $<\;4({\mu}m)$ and channel area of $<\;4{\times}4({\mu}m^2)$ respectively, can be accurately performed only from a 3-D numerical simulation due to their sharp variations in threshold voltages.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1992년도 하계학술대회 논문집 B
• /
• pp.806-808
• /
• 1992

This paper describes a buried-island SOI MOSFET structure which can reduce the edge channel effect by improving the interface properties at the side wall of active island and by reducing the strength of electric field applied at the upper corner of the side wall from the gate. Also, the buried-island SOl structure can obtain the uniform thickness of SOl film. The buried-island structure can be achieved by Zone- Melting-Recrystallization of polysilicon and polishing. Both simulated and experimental results show that the buried-island SOl NMOSFET has less edge channel effect than the conventional SOl NMOSFET using LOCOS or mesa isolation technique.

• Journal of Electrical Engineering and Technology
• /
• 제1권3호
• /
• pp.396-405
• /
• 2006

The visual analysis of buried channel (Be) devices such as buried channel MOSFETs and CCDs (Charge Coupled Devices) is investigated to give better understanding and insight for their electrical behaviours using a 3-dimensional (3-D) numerical simulation. This paper clearly demonstrates the capability of the numerical simulation of 'EVEREST' for characterising the analysis of a depletion mode MOSFET and BC CCD, which is a simulation software package of the semiconductor device. The inverse threshold and punch-through voltages obtained from the simulations showed an excellent agreement with those from the measurement involving errors of within approximately 1.8% and 6%, respectively, leading to the channel implanted doping profile of only approximately $4{\sim}5%$ error. For simulation of a buried channel CCD an advanced adaptive discretising technique was used to provide more accurate analysis for the potential barrier height between two channels and depletion depth of a deep depletion CCD, thereby reducing the CPU running time and computer storage requirements. The simulated result for the depletion depth also showed good agreement with the measurement. Thus, the results obtained from this simulation can be employed as the input data of a circuit simulator.

• 대한전자공학회논문지SD
• /
• 제41권4호
• /
• pp.9-14
• /
• 2004

매몰 산화층 밑의 실리콘 기판에 자기정렬 방법으로 ground plane 전극을 만든 SOI MOSFET의 단채널 현상과 Punchthrough 특성을 측정·분석하였다. 채널 길이가 $0.2{\mu}m$ 이하의 소자에서는 GP-SOI 소자가 FD-SOI 소자보다 채널 길이에 따른 문턱전압 저하 및 subthreshold swing이 작고 DIBL 현상이 크게 개선됨을 알 수 있었다. 기판전압에 따른 문턱전압 특성으로부터 GP-SOI 소자의 body factor가 FD-SOI 소자보다 큰 것을 알 수 있었다. 그리고 punchthrough 전압 특성으로부터 GP-SOI 소자의 punchthrough 전압이 FD-SOI 소자보다 큰 것을 알 수 있었다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1994년도 추계학술대회 논문집
• /
• pp.210-215
• /
• 1994

In the CMOS device, Counter doping is needed to adjust threshold voltage because of the difference between n-MOSFET and p-MOSFET well doping concentration when n+ polysilicon gate is used. Therefore buried channel is formed in the p-channel MOSFET degrading properties. So well doping concentration and doping condition should be considered in fabrication process and device design. Here we are to extract the initial process condition using simulation and fabricate p-MOSFET device and then compare the subthreshold characteristics of simulated and fabricated device.

• 대한전자공학회논문지
• /
• 제27권2호
• /
• pp.98-104
• /
• 1990

$P^+$형 다결정 실리콘 게이트와 n형 다결정 실리콘 게이트를 갖는 P채널 MOSFET를 제작하였다. 채널의 길이와 채널의 이온 주입 조건에 따라 SC-PMOSFET와 BC-PMOSFET의 transconductance 문턱저압저하 및 subthreshold 특성을 분석하였다. 측정된 소자의 특성으로 부터 SC-PMOSFET소자가 BC-PMOSFET 소자에 비하여 transconductance는 작으며 subthreshold 영역에서 누설전류도 작고 문턱 전압 저하및 DIBL영향이 작게 일어남을 알 수 있었다.

• 대한전자공학회논문지SD
• /
• 제41권10호
• /
• pp.1-7
• /
• 2004

SOI 구조에서 형성된 MOS 트랜지스터의 장점과 strained Si에서 전자의 이동도가 향상되는 효과를 동시에 고려하기 위해 buried oxide(BOX)층과 Top Si층 사이에 Ge을 삽입하여 strained Si/relaxed SiGe/SiO₂Si 구조를 형성하고 strained Si fully depletion(FD) n-MOSFET를 제작하였다. 상부 strained Si층과 하부 SiGe층의 두께의 합을 12.8nm로 고정하고 상부 strained Si 층의 두께에 변화를 주어 두께의 변화가 electron mobility에 미치는 영향을 분석하였다. Strained Si/relaxed SiGe/SiO2/Si (strained Si/SGOI) 구조위의 FD n-MOSFET의 전자 이동도는 Si/SiO₂/Si (SOI) 구조위의 FD n-MOSFET 에 비해 30-80% 항상되었다. 상부 strained Si 층과 하부 SiGe 층의 두께의 합을 12.8nm 로 고정한 shrined Si/SGOI 구조 FD n-MOSFET에서 상부층 strained Si층의 두께가 감소하면 하부층 SiGe 층 두께 증가로 인한 Ge mole fraction이 증가함에 의해 inter-valley scattering 이 감소함에도 불구하고 n-channel 층의 전자이동도가 감소하였다. 이는 strained Si층의 두께가 감소할수록 2-fold valley에 있는 전자가 n-channel 층에 더욱더 confinement 되어 intra-valley phonon scattering 이 증가하여 전자 이동도가 감소함이 이론적으로 확인되었다.

• ETRI Journal
• /
• 제25권3호
• /
• pp.203-209
• /
• 2003

This paper reports on our investigation of DC and RF characteristics of p-channel metal oxide semiconductor field effect transistors (pMOSFETs) with a compressively strained $Si_{0.8}Ge_{0.2}$ channel. Because of enhanced hole mobility in the $Si_{0.8}Ge_{0.2}$ buried layer, the $Si_{0.8}Ge_{0.2}$ pMOSFET showed improved DC and RF characteristics. We demonstrate that the 1/f noise in the $Si_{0.8}Ge_{0.2}$ pMOSFET was much lower than that in the all-Si counterpart, regardless of gate-oxide degradation by electrical stress. These results suggest that the $Si_{0.8}Ge_{0.2}$ pMOSFET is suitable for RF applications that require high speed and low 1/f noise.