• Electrical & Electronic Materials
• /
• v.8 no.6
• /
• pp.708-714
• /
• 1995

We have discussed the buried-channel(BC) behavior through the subthreshold characteristics of submicron PMOSFET device fabricated with twin well CMOS process. In this paper, we have guessed the initial conditions of ion implantation using process simulation, obtained the subthreshold characteristics as a function of process parameter variation such as threshold adjusting ion implant dose($D_c$), channel length(L), gate oxide thickness($T_ox$) and junction depth of source/drain($X_j$) using device simulation. The buried channel behavior with these process prarameter variation were showed apparent difference. Also, the fabricated pMOSFET device having different channel length represented good S.S value and low leakage current with increasing drain voltage.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.33A no.10
• /
• pp.130-138
• /
• 1996

The size of a device needs to scale down to increase its integrity and speed. As the size of the device is reduced, the hot-carrier degradation that severely effects on device reliabilty is concerned. In this paper, sub-micron buried-channel P-MOSFETs were fabircated, and the hot-carrier effects were invetigated. Also the hot-carrier effect in the buired-channel P-MOSFETs and the surface-channel P-MOSFETs were compared with simulation programs using SUPREM-4 and MINIMOS-4. This paper showed that the electric characteristics of sub-micron P-MOSFET are different from those of N-MOSFET. Also it showed that the punchthrough voltage ( $V_{pt}$ ) was abruptly drop after applying the stress and became almost 0V when the channel lengths were shorter than 0.6.mu.m. The lower punchthrough voltage causes the device to operte poorly by the deterioration of cut-off characteries in the switching mode. We can conclude that the buried channel P-MOSFET for CMOS circuits has a limit of the channel length to be around 0.6.mu.m.

• Journal of Electrical Engineering and Technology
• /
• v.2 no.2
• /
• pp.267-273
• /
• 2007

A depletion-mode MOSFET has been analyzed to evaluate its electrical behavior using a novel 3-D numerical simulation package. The characterizing analysis of the BC MOSFET was performed through short-channel narrow-channel and small-geometry effects that are investigated, in detail, in terms of the threshold voltage. The DIBL effect becomes significant for a short-channel device with a channel length of $<\;3({\mu}m)$. For narrow-channel devices the variation of the threshold voltage was sharp for $<4({\mu}m)$ due to the strong narrow-channel effect. In the case of small-geometry devices, the shift of the threshold voltage was less sensitive due to the combination of the DIBL and substrate bias effects, as compared with that observed from the short-channel and narrow-channel devices. The characterizing analysis of the narrow-channel and small-geometry devices, especially with channel width of $<\;4({\mu}m)$ and channel area of $<\;4{\times}4({\mu}m^2)$ respectively, can be accurately performed only from a 3-D numerical simulation due to their sharp variations in threshold voltages.

• Proceedings of the KIEE Conference
• /
• 1992.07b
• /
• pp.806-808
• /
• 1992

This paper describes a buried-island SOI MOSFET structure which can reduce the edge channel effect by improving the interface properties at the side wall of active island and by reducing the strength of electric field applied at the upper corner of the side wall from the gate. Also, the buried-island SOl structure can obtain the uniform thickness of SOl film. The buried-island structure can be achieved by Zone- Melting-Recrystallization of polysilicon and polishing. Both simulated and experimental results show that the buried-island SOl NMOSFET has less edge channel effect than the conventional SOl NMOSFET using LOCOS or mesa isolation technique.

• Journal of Electrical Engineering and Technology
• /
• v.1 no.3
• /
• pp.396-405
• /
• 2006

The visual analysis of buried channel (Be) devices such as buried channel MOSFETs and CCDs (Charge Coupled Devices) is investigated to give better understanding and insight for their electrical behaviours using a 3-dimensional (3-D) numerical simulation. This paper clearly demonstrates the capability of the numerical simulation of 'EVEREST' for characterising the analysis of a depletion mode MOSFET and BC CCD, which is a simulation software package of the semiconductor device. The inverse threshold and punch-through voltages obtained from the simulations showed an excellent agreement with those from the measurement involving errors of within approximately 1.8% and 6%, respectively, leading to the channel implanted doping profile of only approximately $4{\sim}5%$ error. For simulation of a buried channel CCD an advanced adaptive discretising technique was used to provide more accurate analysis for the potential barrier height between two channels and depletion depth of a deep depletion CCD, thereby reducing the CPU running time and computer storage requirements. The simulated result for the depletion depth also showed good agreement with the measurement. Thus, the results obtained from this simulation can be employed as the input data of a circuit simulator.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.41 no.4
• /
• pp.9-14
• /
• 2004

This paper reports the measurement and analysis of the short channel effects and the punchthrough voltage of SOI-MOSFET with a self-aligned ground plane electrode in the silicon mechanical substrate underneath the buried oxide. When the channel length is reduced below 0.2${\mu}{\textrm}{m}$ it is observed that the threshold voltage roll-off and the subthreshold swing with channel length are reduced and DIBL is improved more significantly in GP-SOI devices than FD-SOI devices. It is also observed from the dependence of threshold voltage with substrate biases that the body factor is a higher in GP-SOI devices than FD-SOI devices. From the measurement results of punchthrough voltage, GP-SOI devices show the higher punchthrough voltages than FD-SOI devices

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1994.11a
• /
• pp.210-215
• /
• 1994

In the CMOS device, Counter doping is needed to adjust threshold voltage because of the difference between n-MOSFET and p-MOSFET well doping concentration when n+ polysilicon gate is used. Therefore buried channel is formed in the p-channel MOSFET degrading properties. So well doping concentration and doping condition should be considered in fabrication process and device design. Here we are to extract the initial process condition using simulation and fabricate p-MOSFET device and then compare the subthreshold characteristics of simulated and fabricated device.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.27 no.2
• /
• pp.98-104
• /
• 1990

A study of the operation of surface and buried mode PMOSFET's is condusted. Using device with different channel length and channel implant dosage, threshold voltage lowering, transcon-diuctance and subthreshold characteristics of surface mode PMOFET are compared with those of buried mode MPOSFET. From the results, the surface channel device were more resistant to short channel effect than the buried channel device.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.41 no.10
• /
• pp.1-7
• /
• 2004

In order to enhance the electron mobility in SOI n-MOSFET, we fabricated fully depletion(FD) n-MOSFET on the strained Si/relaxed SiGa/SiO$_2$/Si structure(strained Si/SGOI) formed by inserting SiGe layer between a buried oxide(BOX) layer and a top silicon layer. The summated thickness of the strained Si and relaxed SiGe was fixed by 12.8 nm and then the dependency of electron mobility on strained Si thickness was investigated. The electron mobility in the FD n-MOSFET fabricated on the strained Si/SGOI enhanced about 30-80% compared to the FD n-MOSFET fabricated on conventional SOI. However, the electron mobility decreased with the strained Si thickness although the inter-valley phonon scattering was reduced via the enhancement of the Ge mole fraction. This result is attributed to the increment of intra-valley phonon scattering in the n-channel 2-fold valley via the further electron confinement as the strained Si thickness was reduced.

• ETRI Journal
• /
• v.25 no.3
• /
• pp.203-209
• /
• 2003

This paper reports on our investigation of DC and RF characteristics of p-channel metal oxide semiconductor field effect transistors (pMOSFETs) with a compressively strained $Si_{0.8}Ge_{0.2}$ channel. Because of enhanced hole mobility in the $Si_{0.8}Ge_{0.2}$ buried layer, the $Si_{0.8}Ge_{0.2}$ pMOSFET showed improved DC and RF characteristics. We demonstrate that the 1/f noise in the $Si_{0.8}Ge_{0.2}$ pMOSFET was much lower than that in the all-Si counterpart, regardless of gate-oxide degradation by electrical stress. These results suggest that the $Si_{0.8}Ge_{0.2}$ pMOSFET is suitable for RF applications that require high speed and low 1/f noise.