• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 하계종합학술대회 논문집(2)
• /
• pp.201-204
• /
• 2000

In this paper, an A/D converter is implemented to obtain 8bit resolution at a conversion rate of 10Msample/s. This architecture is proposed using the 2-step architecture for high speed conversion rate. It is consisted of sample/hold circuit, low power comparator, voltage reference circuit and DAC of binary weighted capacitor array. Proposed A/D converter is designed using 0.2$\mu\textrm{m}$ CMOS technology. The SNR is 45.3dB at a sampling rate of 10MHz with 1.95MHz sine input signal. When an 8bit 10Msample/s A/D converter is simulated, the Differential Nonlinearity / Integral Nonlinearity (DNL/ INL) error are ${\pm}$1 / ${\pm}$2 LSB, respectively. The power consumption is 13㎽ at single +2.5V supply voltage.

• Journal of Power Electronics
• /
• 제14권4호
• /
• pp.649-660
• /
• 2014

A novel non-isolated bidirectional soft-switching SEPIC/ZETA converter with reduced ripple currents is proposed and characterized in this study. Two auxiliary switches and an inductor are added to the original bidirectional SEPIC/ZETA components to form a new direct power delivery path between input and output. The proposed converter can be operated in the forward SEPIC and reverse ZETA modes with reduced ripple currents and increased voltage gains attributed to the optimized selection of duty ratios. All switches in the proposed converter can be operated at zero-current-switching turn-on and/or turn-off through soft current commutation. Therefore, the switching and conduction losses of the proposed converter are considerably reduced compared with those of conventional bidirectional SEPIC/ZETA converters. The operation principles and characteristics of the proposed converter are analyzed in detail and verified by the simulation and experimental results.

• 한국전기전자재료학회논문지
• /
• 제21권5호
• /
• pp.421-425
• /
• 2008

In this research, a 8-bit CMOS 2 stage folding A/D converter is designed, For low power consumption and small chip size, the A/D converter is designed by using folding and interpolation circuit. Folding circuit is composed of the transistor differential pairs which are connected in parallel. It reduces the number of comparator drastically. The analog block composed of folding block, current interpolation circuit, and three stage current comparator is designed with differential-mode for high speed operation. The simulation in a $0.35\;{\mu}m$ CMOS process. shows DNL and SNDR of 0.5LSB and 47 dB at 250 MHz/s sampling frequency.

• 한국시뮬레이션학회:학술대회논문집
• /
• 한국시뮬레이션학회 2002년도 춘계학술대회논문집
• /
• pp.177-181
• /
• 2002

In this paper, the design of 12bit pipeline BiCMOS A/D converter presented. A BiCMOS operational amplifier and comparator suitable for use in the pipeline A/D converter. The main features is low distortion track-and-hold with 0-300MHz input bandwidth, and a proprietary 12bit multi-stage quantizer.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2006년도 전력전자학술대회 논문집
• /
• pp.128-130
• /
• 2006

We introduce 2[MVA] 3300[V] 7-level voltage source inverter system developed by POSCON and describe the main characteristics of inverter system i.e. PWM converter, H-bridge power module, phase shifted carrier PWM The PWM converter is a three-phase boost converter, which operates in a 4-quadrant and in a nearly unit displacement power factor. Experimental waveforms are also presented to verify the proposed method and performance of the developed system.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2003년도 하계종합학술대회 논문집 I
• /
• pp.346-349
• /
• 2003

A SiGe HBT MMIC double balaced up-converter has been designed and fabricated for C-band WLAN applications. The up-converter is based on the Gilbert cell mixer with an active baluns for differential inputs of LO and IF signals. The designed up-converter exhibits a conversion gain 12.5dB for a -10 dBm LO power. It also exhibits LO-RF isolation of 19.3dBc, and IF-RF isolation of 23.3 dBc at a 1-dB compression point of -14.2dBm

• 대한전기학회논문지:시스템및제어부문D
• /
• 제54권3호
• /
• pp.186-190
• /
• 2005

In this paper, the pipelined A/D converter with multi S/H stage structure is proposed for high resolution and high-speed data conversion rate. In order to improve a resolution and operational speed, the proposed structure increased the sampling time that is sampled input signal. In order to verify the operation characteristics, 20MS/s pipelined A/D converter is designed with two S/H stage. The simulation result shows that INL and DNL are $0.52LSB\~-0.63LSB$ and $0.53LSB\~-0.56LSB$, respectively. Also, the designed Analog-to-Digital converter has the SNR of 43dB and power consumption is 18.5mW.

• 대한전자공학회논문지SD
• /
• 제43권6호
• /
• pp.53-61
• /
• 2006

고속 Flash, Pipelining type의 CMOS A/D 변환기에서 Sampling frequency가 고주파로 올라감에 따라 Clock Feed-through 현상, Kick-back 현상 등의 영향으로 DC Reference voltage 흔들림 현상이 심화되고 있다. 뿐만 아니라 측정 시 외부 Noise가 Reference voltage에 적지 않은 영향을 미친다는 것을 감안 할 때 High speed A/D converter에서 Reference fluctuation 감쇄회로는 반드시 필요하다. 기존의 방식은 단순히 커패시터를 이용했으나 면적이 크고 효과가 좋지 않다는 단점이 있다. 본 논문에서는 Transmission Gate를 이용한 reference fluctuation 감쇄 회로를 제안하고 흔들림 현상이 크게 개선되었음을 정량적 분석 및 측정을 통하여 증명하였다. 제안하는 회로의 측정을 위해 6bit의 해상도를 갖는 2GSPS CMOS A/D 변환기를 설계 및 제작하였다. 제작된 A/D 변환기를 이용하여 Reference 전압이 40mV의 흔들림이 있음에도 원하는 범위 내에서 동작함을 측정하였다. 본 연구에서는 1.8V $0.18{\mu}m$ 1-poly 5-metal N-well CMOS 공정을 사용하였고, 소비전력은 145mW로 Full Flash 변환기에 비해 낮았다. 실제 제작된 칩의 SNDR은 약 36.25dB로 측정되었고, INL과 DNL은 각각 ${\pm}0.5$ LSB 이하로 나타났다. 유효칩 면적은 $997um\times1040um$ 이었다.

• 전자공학회논문지A
• /
• 제31A권6호
• /
• pp.98-106
• /
• 1994

To realize high accuracy and high speed we developed a new self compensation scheme and applied it to a 10-bit D/A converter. This circuit can compensate the device mismatch without interrupting the D/A converter operation. With the compensation circuit,INA decreased down to 0.22LSB from 0.47LSB. The device was fabricated using a 0.8$\mu$m CMOS process. The area of the D/A converter core is 3.2mm$^{2}$ and the area of the compensation part is 0.64mm$^{2}$.

• 대한전자공학회논문지SD
• /
• 제38권5호
• /
• pp.367-373
• /
• 2001

8개의 N과 P채널 EEPROM을 이용하여 A/D 변환기를 설계하였다. 프로그래밍 모드에서 EEPROM의 선형적 저장능력을 관찰하기 위해 MOSIS의 1.2㎛ double-poly CMOS 공정을 이용하여 셀이 제작되었다. 그 결과 1.25V와 2V구간에서 10㎷ 미만의 오차 내에서 셀이 선형적으로 프로그램 되는 것을 보았다. 이러한 실험 결과를 이용하여 프로그램 가능한 A/D 변환기의 동작이 Hspice에서 시뮤레이션 되었으며, 그 결과 A/D 변환기가 37㎼의 전력을 소모하고 동작주파수는 333㎒ 정도인 것으로 관찰되었다.