• Journal of IKEEE
• /
• v.7 no.1 s.12
• /
• pp.9-15
• /
• 2003

An optimized finite-field multiplier is proposed for encryption and error correction devices. It is based on a modified Linear Feedback Shift Register (LFSR) which has lower power consumption and smaller area than prior LFSR-based finite-field multipliers. The proposed finite field multiplier for GF(2n) multiplies two n-bit polynomials using polynomial basis to produce $z(x)=a(x)^*b(x)$ mod p(x), where p(x) is a irreducible polynomial for the Galois Field. The LFSR based on a serial multiplication structure has less complex circuits than array structures and hybrid structures. It is efficient to use the LFSR structure for systems with limited area and power consumption. The prior finite-field multipliers need 3${\cdot}$m flip-flops for multiplication of m-bit polynomials. Consequently, they need 6${\cdot}$m latches because one flip-flop consists of two latches. The proposed finite-field multiplier requires only 4${\cdot}$m latches for m-bit multiplication, which results in 1/3 smaller area than the prior finite-field multipliers. As a result, it can be used effectively in encryption and error correction devices with low-power consumption and small area.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.14 no.5
• /
• pp.102-106
• /
• 2015

In this paper, we study the optimal design for improved rotation latch system performance. The factors affecting the Torque generated in the armature were chosen as design variables. Utilizing the vertical matrix, the orthogonal array table was created to predict the results through minimal analysis. To confirm the Torque generation amount, by utilizing the commercial electromagnetic analysis software MAXWELL, finite element analysis was performed. The approximation method and experimental design through the commercial PIDO tool PIAnO for optimal design and calculations were utilized to perform experiments using an optimization method with evolutionary algorithms. Using the approximation model, design factors were determined that can maximize the torque generated in the armature, and the simulation was performed.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.41 no.3
• /
• pp.8-8
• /
• 2004

본 논문에서는 새로운 interpolation-2 방식의 비교기 구조를 제안하여 칩 면적과 전력 소모를 줄이며 오류정정 회로를 내장하는 6-비트 70㎒ ADC를 설계하였다. Interpolation 비교기를 적용하지 않은 flash ADC의 경우 2n개의 저항과 2n -1개의 비교기가 사용되며 이는 저항의 수와 비교기의 수에 비례하여 많은 전력과 큰 면적을 필요로 하고 있다. 또한, interpolation-4 비교기를 적용한 flash ADC는 면적은 작으나 단조도, SNR, INL, DNL 특성이 떨어진다는 단점이 있었다. 본 논문에서 설계한 interpolation-2 방식의 ADC는 저항, 비교기, 앰프, 래치, 오류정정 회로, 온도계코드 디텍터와 인코더로 구성되며, 32개의 저항과 31개의 비교기를 사용하였다. 제안된 회로는 0.18㎛ CMOS 공정으로 제작되어 3.3V에서 40mW의 전력소모로 interpolation 비교기를 적용하지 않은 flash ADC에 비해 50% 개선되었으며, 칩 면적도 20% 감소되었다. 또한 노이즈에 강한 오류정정 회로가 사용되어 interpolation-4 비교기를 적용한 flash ADC 에 비해 SNR이 75% 개선된 결과를 얻었다.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.37 no.10
• /
• pp.65-72
• /
• 2000

In this paper, we propose an efficient technique to minimize the input offset of a dynamic latch comparator. We analyzed offset due to charge injection mismatching and unwanted positive feedback during sampling phase. The last one was only considered in the previous works. Based on the analysis, we proposed a modified dynamic latch with initialization switch. The proposed circuit was simulated using 0.65${\mu}m$ CMOS process parameter with 5v supply. The simulation results showed that the input offset is less than 5mV ant 200MHz sampling frequency and the input offset is improved about 80% compared with previous work in $5k{\Omega}$ input resistance.

• Journal of IKEEE
• /
• v.8 no.2 s.15
• /
• pp.161-165
• /
• 2004

In this paper, an 8bit wave pipelined adder using the static CMOS plus Edge-Sensing Completion Detection Logic is presented. The clockless wave-pipelining algorithm was implemented in the circuit design. The Edge-Sensing Completion Detection (ESCD) in the algorithm is consisted of edge-sensing circuits and latches. Using the algorithm, skewed data at the output of 8bit adder could be aligned. Simulation results show that the adder operates at 1GHz in $0.35{\mu}m$ CMOS technology with 3.3V supply voltage.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.46 no.3
• /
• pp.1-9
• /
• 2009

In this paper proposed a new method which adaptively eliminates comparator offsets using the threshold voltage shift by the Fowler-Nordheim stress. The method evaluates the sign of comparator offset and gives the FN stress to the stronger MOSFETs of the comparator, leading to offset reduction. We have used an appropriate stressing operation, named 'stress-packet', in order to converge the offset value to zero. We applied the method to the latch-type comparator which is prevalently used for DRAM bitline sense amplifier, and verified through experiments that offsets of the latch-type comparators are nearly eliminated with the stress-packet operations. We also discuss about the reliability issues that must be guaranteed for field application of this method.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.38 no.3
• /
• pp.44-44
• /
• 2001

본 논문에서는 CMOS로 구현된 3.3V 8-bit 200MSPS의 Folding / Interpolation 구조의 A/D 변환기를 제안한다. 회로에 사용된 구조는 FR(Folding Rate)이 8, NFB(Number of Folding Block)가 4, Interpolation rate 이 8이며, 분산 Track and Hold 구조를 회로를 사용하여 Sampling시 입력주파수를 Hold하여 높은 SNDR을 얻을 수 있었다. 고속동작과 저 전력 기능을 위하여 향상된 래치와 디지털 Encoder를 제안하였고 지연시간 보정을 위한 회로도 제안하였다. 제안된 ADC는 0.35㎛, 2-Poly, 3-Metal, n-well CMOS 공정을 사용하여 제작되었으며, 유효 칩 면적은 1070㎛×650㎛ 이고, 3.3V전압에서 230mW의 전력소모를 나타내었다. 입력 주파수 10MHz, 샘플링 주파수 200MHz에서의 INL과 DNL은 ±1LSB 이내로 측정되었으며, SNDR은 43㏈로 측정되었다.

• Proceedings of the IEEK Conference
• /
• 2000.11b
• /
• pp.160-163
• /
• 2000

In this paper, we propose an efficient technique to minimize the input offset of a dynamic latch comparator. We analyzed offset due to charge injection mismatching and unwanted positive feedback during sampling phase. The last one was only considered in the previous works. Based on the analysis, we proposed a modified dynamic latch with initialization switch. The proposed circuit was simulated using 0.65$\mu\textrm{m}$ CMOS process parameter with 5v supply. The simulation results showed that the input offset is less than 5mv at 200㎒ sampling frequency and the input offset is improved about 80% compared with previous work in 5k$\Omega$ input resistance.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.9 no.12
• /
• pp.1345-1352
• /
• 2014

Bus architecture of SoC has been replaced by NoC in recent years. Noc uses the multi-clock domains to transmit and receive data between neighbor network interfaces and they have same frequency, but a phase difference because of clock skew. So a synchronizer is used for a mesochronous frequency in interconnection between network interfaces. In this paper the metastability is defined and analyzed in a D latch and a D flip-flop to search the possibilities that data can be lost in the process of sending and receiving data between interconnects when a local frequency and a transmitted frequency have a phase difference. 180nm CMOS model parameter and 1GHz are used to simulate them in HSpice. The simulation results show that the metastability happens in a latch and a flip-flop when input data change near the clock edges and there are intermediate states for a longer time as input data change closer at the clock edge. And the next stage can lose input data depending on environmental conditions such as temperature, processing variations, power supply, etc. The simulation results are very useful to design a mescochronous synchronizer for NoC.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.41 no.3
• /
• pp.83-92
• /
• 2004

In this thesis, a modified interpolation-2 6-bit 70MHz ADC is proposed minimizing chip area and power consumption, which includes an error correction circuit. The conventional flash ADC without interpolation comparators suffers from large chip area and more power consumption due to 2n resistors and 2n-1 comparators. Although the flash ADC with interpolation-4 comparators has small area, SNR, INL and DNL are degraded by comparison with the interpolation -2 comparator. We fabricated the proposed 6-bit ADC with interpolation-2 comparators using 0.18${\mu}{\textrm}{m}$ CMOS process. The ADC is composed of 32-resistors, 31 comparators, amplifiers, latches, error correction circuit, thermometer code detector and encoder As the results, power consumption is reduced to 40mW at 3.3V which is saving about 50% than a flash ADC without interpolation comparators, and area is reduced by 20%. SNR is increased by 75% in comparison with that of a flash ADC with interpolation-4 comparators.