Journal of the Korean Society of Manufacturing Process Engineers (한국기계가공학회지)

The Korean Society of Manufacturing Process Engineers (한국기계가공학회)
권호 표지
DOI QR코드

DOI QR Code

Optimal Design for Improved Rotation Latch System Performance

로테이션 래치 시스템 성능 향상을 위한 최적 설계

  • Received : 2015.07.14
  • Accepted : 2015.08.24
  • Published : 2015.10.31
Download PDF
⟨ Previous Next ⟩

Abstract

In this paper, we study the optimal design for improved rotation latch system performance. The factors affecting the Torque generated in the armature were chosen as design variables. Utilizing the vertical matrix, the orthogonal array table was created to predict the results through minimal analysis. To confirm the Torque generation amount, by utilizing the commercial electromagnetic analysis software MAXWELL, finite element analysis was performed. The approximation method and experimental design through the commercial PIDO tool PIAnO for optimal design and calculations were utilized to perform experiments using an optimization method with evolutionary algorithms. Using the approximation model, design factors were determined that can maximize the torque generated in the armature, and the simulation was performed.

Keywords

References

  1. Yoon, H. S., Chae, H. J., Lee, J. H. and Cho, N. K., "Development of Hydrazine Thruster Latching Valve," Proceedings of the Korean Society of Propulsion Engineers, pp. 363-367, 2005.
  2. Kim. K. N., Noh, Y. J. and Kim, D. H., "Optimization of Base Plates and Contact Switches in Trunk Latches," Trans. of KSAE, Vol. 22, No. 3, pp. 97-104, 2014. https://doi.org/10.7467/KSAE.2014.22.3.097
  3. Shong, K. M. and Roh, Y. S., "A Study on Discrimination between Short-Circuit and Overload based on the Characteristics of the Fusing Current of an Electrical Wire," J. KIEE, Vol. 21, No. 10, pp. 176-180, 2007.
  4. Lee, S. J., Lee, J. H., Lee, D. Y., Seo, T. W. and Kim, J. H., "Optimal Parametric Design of Coil Gun to Improve Muzzle Velocity," J. KSMTE, Vol. 23, No. 4, pp. 408-412, 2014.
  5. Kang, D. M., Kwak J. S., Choi J. W. and Park, K. D., "Optimization for Friction Welding of AZ31 Mg Alloy by Design of Experiments," J. KSMPE, Vol. 10, No. 4, pp. 64-69, 2011.
  6. Ha, H. G., Oh, S. J. and Yee, K. J., "Feasibility Study of Hierarchical Kriging Model in the Design Optimization Process," J. of KSAS, Vol. 42, No. 2, pp. 108-118, 2014.
  7. Kim, J. G. and Lee K. H., "A Structural Design of Microgyroscope Using Kriging Approximation Model," J. KSMPE, Vol.7, No. 4, pp. 149-154, 2008.
  8. Lim, S. H., Choi, N. S., Kim, N. K. and Kim, D. H., "Optimization of BLDC Motor to Minimize Cogging Torque Using Response Surface Method and Evolutionary Algorithm," Proceedins of KIEE Conference, pp. 213-215, 2010.

Cited by

  1. Design of 100W Regenerative Vehicle Suspension to Harvest Energy from Road Surfaces vol.19, pp.7, 2018, https://doi.org/10.1007/s12541-018-0129-5
  2. 전자기 리니어 액츄에이터의 집중매개변수 모델링 및 해석 vol.15, pp.5, 2016, https://doi.org/10.14775/ksmpe.2016.15.5.018
  3. Sensitivity Analysis and Optimum Design of Energy Harvesting Suspension System according to Vehicle Driving Conditions vol.36, pp.12, 2019, https://doi.org/10.7736/kspe.2019.36.12.1173