• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.40 no.5
• /
• pp.397-409
• /
• 2003

This paper describes an implementation of radix-4 trellis parallel architecture and backward state transition control trace back Viterbi decoder, and presents the application results to high speed wireless LAN. The radix-4 parallelized architecture Vietrbi decoder can not only improve the throughput with simple structure, but also have small processing delay time and overhead circuit compared to M-step trellis architecture one. Based on these features, this paper addresses a novel Viterbi decoder which is composed of branch metric computation, architecture of ACS and trace back decoding by sequential control of backward state transition for the implementation of radix-4 trellis parallelized structure. With the proposed architecture, the decoding of variable code rate due to puncturing the base code can easily be implemented by the unified Viterbi decoder. Moreover, any additional circuit and/or peripheral control logic are not required in the proposed decoder architecture. The trace back decoding scheme with backward state transition control can carry out the sequential decoding according to ACS cycle clock without additional circuit for survivor memory control. In order to evaluate the usefulness, the proposed method is applied to channel CODEC of the IEEE 802.11a high speed wireless LAN, and HDL coding simulation results are presented.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2012.10a
• /
• pp.237-240
• /
• 2012

This paper describes an implementation of ARIA crypto algorithm which is a KS (Korea Standards) block cipher algorithm. The ARIA crypto-core supports three master key lengths of 128/192/256-bit specified in the standard and the four modes of operation including ECB, CBC, CTR and OFB. To reduce hardware complexity, a hardware sharing is employed, which shares round function in encryption/decryption module with key initialization module. The ARIA crypto-core is verified by FPGA implementation, the estimated throughput is about 1.07 Gbps at 167 MHz.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.6
• /
• pp.1056-1063
• /
• 2008

This paper describes an efficient design of a multi-standard Viterbi decoder that supports multiple constraint lengths and code rates. The Viterbi decoder is parameterized for the code rates 1/2, 1/3 and constraint lengths 7,9, thus it has four operation nodes. In order to achieve low hardware complexity and low power, an efficient architecture based on hardware sharing techniques is devised. Also, the optimization of ACCS (Accumulate-Subtract) circuit for the one-point trace-back algorithm reduces its area by about 35% compared to the full parallel ACCS circuit. The parameterized Viterbi decoder core has 79,818 gates and 25,600 bits memory, and the estimated throughput is about 105 Mbps at 70 MHz clock frequency. Also, the simulation results for BER (Bit Error Rate) performance show that the Viterbi decoder has BER of $10^{-4}$ at $E_b/N_o$ of 3.6 dB when it operates with code rate 1/3 and constraints 7.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.41 no.3
• /
• pp.187-187
• /
• 2004

In this paper, we present an efficient architecture of a versatile Reed-Solomon (RS) decoder which can be programmed to decode RS codes continuously with my message length k as well as any block length n. This unique feature eliminates the need of inserting zeros for decoding shortened RS codes. Also, the values of the parameters n and k, hence the error-correcting capability t can be altered at every codeword block. The decoder permits 3-step pipelined processing based on the modified Euclid's algorithm (MEA). Since each step can be driven by a separate clock, the decoder can operate just as 2-step pipeline processing by employing the faster clock in step 2 and/or step 3. Also, the decoder can be used even in the case that the input clock is different from the output clock. Each step is designed to have a structure suitable for decoding RS codes with varying block length. A new architecture for the MEA is designed for variable values of the t. The operating length of the shift registers in the MEA block is shortened by one, and it can be varied according to the different values of the t. To maintain the throughput rate with less circuitry, the MEA block uses both the recursive technique and the over-clocking technique. The decoder can decodes codeword received not only in a burst mode, but also in a continuous mode. It can be used in a wide range of applications because of its versatility. The adaptive RS decoder over GF($2^8$) having the error-correcting capability of upto 10 has been designed in VHDL, and successfully synthesized in an FPGA chip.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.41 no.3
• /
• pp.29-38
• /
• 2004

In this paper, we present an efficient architecture of a versatile Reed-Solomon (RS) decoder which can be programmed to decode RS codes continuously with my message length k as well as any block length n. This unique feature eliminates the need of inserting zeros for decoding shortened RS codes. Also, the values of the parameters n and k, hence the error-correcting capability t can be altered at every codeword block. The decoder permits 3-step pipelined processing based on the modified Euclid's algorithm (MEA). Since each step can be driven by a separate clock, the decoder can operate just as 2-step pipeline processing by employing the faster clock in step 2 and/or step 3. Also, the decoder can be used even in the case that the input clock is different from the output clock. Each step is designed to have a structure suitable for decoding RS codes with varying block length. A new architecture for the MEA is designed for variable values of the t. The operating length of the shift registers in the MEA block is shortened by one, and it can be varied according to the different values of the t. To maintain the throughput rate with less circuitry, the MEA block uses both the recursive technique and the over-clocking technique. The decoder can decodes codeword received not only in a burst mode, but also in a continuous mode. It can be used in a wide range of applications because of its versatility. The adaptive RS decoder over GF(2$^{8}$ ) having the error-correcting capability of upto 10 has been designed in VHDL, and successfully synthesized in an FPGA chip.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2008.05a
• /
• pp.93-96
• /
• 2008

This paper describes an efficient design of a multi-standard Viterbi decoder that supports multiple constraint lengths and code rates. The Viterbi decode. is parameterized for the code rates 1/2, 1/3 and constraint lengths 7, 9, thus it has four operation modes. In order to achieve low hardware complexity and low power, an efficient architecture based on hardware sharing techniques is devised. Also, the optimization of ACCS (Accumulate-Subtract) circuit for the one-point trace-back algorithm reduces its area by about 35% compared to the full parallel ACCS circuit. The parameterized Viterbi decoder core has 79,818 gates and 25,600 bits memory, and the estimated throughput is about 105 Mbps at 70 MHz clock frequency.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.48 no.11
• /
• pp.18-26
• /
• 2011

This paper describes a multi-mode LDPC decoder which supports three block lengths(648, 1296, 1944) and four code rates(1/2, 2/3, 3/4, 5/6) of IEEE 802.11n wireless LAN standard. To minimize hardware complexity, it adopts a block-serial (partially parallel) architecture based on the layered decoding scheme. A novel memory reduction technique devised using the min-sum decoding algorithm reduces the size of check-node memory by 47% as compared to conventional method. From fixed-point modeling and Matlab simulations for various bit-widths, decoding performance and optimal hardware parameters such as fixed-point bit-width are analyzed. The designed LDPC decoder is verified by FPGA implementation, and synthesized with a 0.18-${\mu}m$ CMOS cell library. It has 219,100 gates and 45,036 bits RAM, and the estimated throughput is about 164~212 Mbps at 50 MHz@2.5v.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.9
• /
• pp.2041-2047
• /
• 2013

In this paper, we proposed high speed LDPC decoding algorithm based on DVB-S2 standard. For implementing the high speed LDPC decoder, HSS algorithm which reduce the iteration numbers without performance degradation is applied. In HSS algorithm, check node update units are update at the same time of bit node update. HSS can be accelerated to the decoding speed because it does not need to separate calculation of the bit nodes, However, check node calculation blocks need many clocks because of just one memory is used. Therefore, this paper proposed dc-split memory structure in order to reduced the delay and high speed decoder is possible. Finally, this paper presented maximum split memory and throughput for various coding rates in DVB-S2 standard.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.12
• /
• pp.2333-2340
• /
• 2016

A LEA (Lightweight Encryption Algorithm) crypto-processor was designed, which supports three master key lengths of 128/ 192/256-bit, ECB and CTR modes of operation. To achieve high throughput rate, the round transformation block was designed with 128 bits datapath and a pipelined structure of 16 stages. Encryption/decryption is carried out through 12/14/16 pipelined stages according to the master key length, and each pipelined stage performs round transformation twice. The key scheduler block was optimized to share hardware resources that are required for encryption, decryption, and three master key lengths. The round keys generated by key scheduler are stored in 32 round key registers, and are repeatedly used in round transformation until master key is updated. The pipelined LEA processor was verified by FPGA implementation, and the estimated performance is about 8.3 Gbps at the maximum clock frequency of 130 MHz.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.4A
• /
• pp.414-422
• /
• 2011

This paper describes a design of low-density parity-check(LDPC) decoder supporting block length 2,304-bit and code rate 1/2 of IEEE 802.16e mobile WiMAX standard. The designed LDPC decoder employs the min-sum algorithm and partially parallel layered-decoding architecture which processes a sub-matrix of $96{\times}96$ in parallel. By exploiting the properties of the min-sum algorithm, a new memory reduction technique is proposed, which reduces check node memory by 46% compared to conventional method. Functional verification results show that it has average bit-error-rate(BER) of $4.34{\times}10^{-5}$ for AWGN channel with Fb/No=2.1dB. Our LDPC decoder synthesized with a $0.18{\mu}m$ CMOS cell library has 174,181 gates and 52,992 bits memory, and the estimated throughput is about 417 Mbps at 100-MHz@l.8-V.